Search

SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Saturday 31 August 2013
 
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Tattooed Princess
 
This tutorial was written by me on August 31, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Zebrush
You can find this tube at Pics For Design  HERE
Please Don't use this tube without a license.
Scrap Kit: Exclusive Tattooed Princess by Amy Marie's Kits  HERE
Mask: WSL 84  HERE
Font: Inked God Font  HERE

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open PP25.  Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP25 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 110%.


Let’s do the frame layer now: 
Element 24 – C/P and re-size 80%. 
Grab your magic wand.  Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer.  Move under frame layer.  Open PP2. Copy and paste into selection.  Keep selected. If you are using the same tube as me, grab the version you want. C/P and move it into position.   SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  Duplicate the tube layer.  ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.
(see tag for placements)

Now for some elements:

Element 98 – C/P and move under frame elements to bottom right corner of element 24 (frame).  Duplicate and mirror, then flip and move to top left corner of element 24 (frame).
(see tag for placement)
Element 39 – C/P and make sure this layer is over element 24 layer.  Move this to the middle left side of tag.
(see tag for placement)
Element 30 – C/P and re-size 30%.  Move to top middle of element 24 (frame).
(see tag for placement)
Element 35 – C/P and move to top left corner of tag over element 98.
(see tag for placement)
Element 32 - C/P and re-size 80%.  Move to bottom middle of element 24.
(see tag for placement) 
Element 15 – C/P and re-size 50%.  Move to bottom middle over element 32.
(see tag for placement)
Element 31 – C/P and re-size 70%.  Move to bottom right corner of tag.
(see tag for placement)
Element 43 – C/P and move to bottom of tag over all layers.  Duplicate and mirror then flip.  Move copy up a little bit on tag.
(see tag for placement)
Element 62 - C/P and move to upper part of tag.  Duplicate and flip, move down on tag just a little.
(see tag for placement)
Element 49 - C/P and re-size 80%.  Move to top right corner of element 24.
(see tag for placement)
Element 58 - C/P and move over element 24 where you like it.  I have it in the middle of (frame) layer.
(see tag for placement)

 
I place the tube layer here: 
If you are using the same tube as me, grab the version of tube you want to work with.  C/P and re-size 50%.  Move to bottom left corner of tag. 
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
Thursday 29 August 2013
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Miss Cane
 
This tutorial was written by me on August 29, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Ismael Rac
You can find this tube at XeracX Store  HERE
Please Don't use this tube without a license.
Scrap Kit: 2013 Miss Cane by MistyLynns Creations  HERE
Mask: WSL 84  HERE
Font: Inked God Font  HERE

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 1.  Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 120%.


Let’s do the frame layer now: 
Element 6 – C/P and leave in the middle of the tag.  From here, I grabbed my SELECTION TOOL and created a circle.
(see preview)



Then I added a new raster layer.  Opened Paper 15.  Copied and pasted into selection.  Then I grabbed the magic wand again and went to the frame layer.  Click in the middle of element 6.
SELECTIONS – MODIFY – EXPAND 8 PIXELS - DELETE and was left with a background for the frame layer.  Keep selected.
New Raster Layer.  Move under frame layers.  Open Paper 18.
Copy and paste into selection.  Keep selected.
If you are using the same tube as me, grab the version you like.
C/P and move it into position.  
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  Duplicate the tube layer.  ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to LUMINANCE (L).

(see tag for placements)

Now for some elements:

Element 22 – C/P and move to top left corner.  Move this layer under all other layers.  Duplicate and mirror.
(see tag for placement)
Element 13 – C/P and re-size 40%. Move to bottom left side in front of all layers.
(see tag for placement)
Element 34 – C/P and re-size 30%.  Move bottom right side in front of element 13
(see tag for placement)
Element 30 – C/P and re-size 50%.  Move to bottom right side of element 34.
(see tag for placement)
Element 29 – C/P and re-size 50%.  Move to bottom right corner of tag.  Duplicate and move right just a little.
(see tag for placement)
Element 11 – C/P and re-size 25%.  Move to bottom right side of tag.
(see tag for placement)
Element 10 – C/P and re-size 40%.  Move to bottom right side of tag.
(see tag for placement)
Element 4 - C/P and re-size 20%.  Move to bottom right side of tag.
(see tag for placement)
Element 17 - C/P and re-size 50%.  Move to right side of frame.  Duplicate and move up some.
(see tag for placement)
Element 21 - C/P and re-size 50%.  Move to right side between element 17 and copy of element 17.  Make sure copy of element 17 is under this layer.
(see tag for placement)
Element 5 - C/P and re-size 80%.  Move to top left corner of tag.
(see tag for placement)
Element 26 - C/P and move to upper left side of tag.  Duplicate and mirror and flip.
(see tag for placement) 
 
I place the tube layer here: 
If you are using the same tube as me, grab the version of tube you want to work with.  C/P and re-size 50%.  Move to left side of tag. 
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 

Wednesday 28 August 2013
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Autumn Heat
 
This tutorial was written by me on August 28, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Alex Prihodko
You can find this tube at Pics For Design  HERE
Please Don't use this tube without a license.
Scrap Kit: Exclusive Autumn Heat by Amy Marie's Kits  HERE
Mask: WSL 81  HERE
Font: JackieO Font  HERE

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open PP14.  Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP14 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 81 – OK.  Duplicate and merge down.  Re-size 120%.


Let’s do the frame layer now: 
Element 3 – C/P and leave in the middle of the tag.
Grab your magic wand.  Click in the middle of element.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer.  Move under frame layer.  Open PP15.
Copy and paste into selection.  Keep selected.
If you are using the same tube as me, grab the version you want.
C/P and move it into position.  
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  Duplicate the tube layer.  ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to MULTIPLY.

(see tag for placements)

Now for some elements:

Element 81 – C/P and move to left.  Move this layer under all other layers.  Duplicate and mirror.
(see tag for placement)
Element 79 – C/P and re-size 70%.  Move to upper right over element 30 layer.  Duplicate and mirror.
(see tag for placement)
Element 5 – C/P and re-size 50%.  Move to top middle of tag.
(see tag for placement)
Element 53 – C/P and re-size 60%.  Move to bottom left side of element 30.  Duplicate and mirror.
(see tag for placement)
Element 16 – C/P and move to bottom middle of tag in front of element 53 and copy of element 53.
(see tag for placement)
Element 39 – C/P and move to bottom left corner of tag.
(see tag for placement)
Element 50 – C/P and re-size 70%.  Move to bottom left side but on right side of element 39.
(see tag for placement)
Element 85 - C/P and re-size 50%.  Move to bottom middle of tag in front of element 16.
(see tag for placement)
Element 92 - C/P and move to upper left side of tag.
(see tag for placement)
Element 90 - C/P and move where you like. 
(see tag for placement) 

I place the tube layer here: 
If you are using the same tube as me, grab the tube. 
C/P and re-size 50%.  Move to right side of tag. 
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
 
Monday 26 August 2013
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Beauty In Autumn
 
This tutorial was written by me on August 26, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Arthur Crowe
You can find this tube at Arthur Crowe's Factory  HERE
Please Don't use this tube without a license.
Scrap Kit: Beauty In Autumn by Sandy's Design  HERE
Mask: WSL 84  HERE
Font:  Amal-Vic Font  HERE

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open P2.  Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste P2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 110%.


Now for some elements:

Glitter 3 – C/P and move to top right corner.  Duplicate and mirror.

(see tag for placement)

Stickwreath2 – C/P and move up a little and to the right a little.
(see tag for placement)


Let’s do the frame layer now: 
Frame4 – C/P and move up a little and to the right a little over the stickwreath2 layer.  Grab your magic wand.  Click in the middle of frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer.  Move under frame layer.  Open P6.
Copy and paste into selection.  Keep selected.
Autumn tree - Copy and paste into selection.  Keep selected.
If you are using the same tube as me, grab the medium CU version and C/P it now.  Move it into position.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  Duplicate the tube layer.  ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.

(see tag for placements)

Now for some more elements:
Fall Leaf3 – C/P and re-size 50%.  Move to top left side of frame.  Duplicate and mirror.  Move leaf on other side of frame.  Leave some space between original and copy.
(see tag for placement)
Flower – C/P and re-size 50%.  Move up and between both leaf layers.
(see tag for placement)
Ivy – C/P and re-size 70%.  Move to left side.  Mirror and flip.  Move down just a little.  Duplicate and mirror again.
(see tag for placement)
Leaves1 – C/P and Move to bottom over other elements.  Duplicate and mirror.
(see tag for placement)
Butterflys – C/P and move a bit left and a bit down.
(see tag for placement)

I place the tube layer here: 
If you are using the same tube as me, grab the full size tube. 
C/P and re-size 70%.  Move to left side of tag. 
(see tag for placement)

More Elements now:
Basket 1 – C/P and re-size 55%.  Mirror and move to bottom right corner.

(see tag for placement)
Fruit basket – C/P and re-size 50%.  Mirror and move to bottom right corner in front of basket 1.

(see tag for placement)
Autumn Cupcake – C/P and re-size 20%.  Move to bottom right corner in front of fruit basket.

(see tag for placement)
Autumn Leaves Cupcake – C/P and re-size 20%.  Move to bottom right corner in front of autumn cupcake

(see tag for placement)
Fawn 2 – C/P and re-size 60%.Move to bottom left corner in front of tube.

(see tag for placement)
Fawn 1 – C/P and re-size 60%.  Move to bottom left corner in front of fawn 2.

(see tag for placement)

Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 

My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me