Showing posts with label Anna Marine. Show all posts
Showing posts with label Anna Marine. Show all posts
Monday, 16 February 2015
PTU The Thorn
This tutorial was written by me on February 16, 2015.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X6 but any version would work.
Artist: Anna Marine
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Scrap Kit: ScrapFoxy_IB-AnnaMarine-34-1 by Foxy's Designz
You can find this kit at Creative Design Outlet HERE
You can find this kit at Creative Design Outlet HERE
Mask: WSL 3 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.
Duplicate and merge down.
(see tag for placement)
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.
Duplicate and merge down.
(see tag for placement)
Element 9 - C/P and move to upper left corner of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror then flip.
Element 18 - C/P and re-size 40%. Move to upper right corner of tag.
I've used
V & H 3
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I add
name and © info and then save.
Let me know what you think of
this tutorial.
Saturday, 6 September 2014
PTU Life Is A Rose
This tutorial was written by me on September 6, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X2 but any version would work.
Artist: Anna Marine
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Scrap Kit: ScrapFoxy_IB-AnnaMarine-34-1
You can find this kit by Foxys Designz at Creative Design Outlet HERE
You can find this kit by Foxys Designz at Creative Design Outlet HERE
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 6. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 6. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
NEW RASTER LAYER - C/Paste into selection Paper 2.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN. Reduce opacity to 50%
(see tag for placement)
Now onto some elements:
Element 17 - C/P and re-size 70%. Move to left side of frame. Make sure this and all layer(s) are OVER the frame layer(s). Duplicate and mirror. Move into position on other side of frame.
(see tag for placement)
Element 8 - C/P and re-size 30%. Move to top right corner of frame over copy of element 17.
Element 22 - C/P and re-size 75%. Mirror and move to right side of frame over element 17.
Element 4 - C/P and re-size 50%. Move to top left corner of frame.
Element 12 - C/P and re-size 97%. Move to bottom of frame. Make sure it looks like it is wrapped around bottom of frame.
(see tag for placement)
Element 5 - C/P and re-size 50%. Move to bottom and a little bit to the right on frame.
I place the tube layer(s) here:
If you are using the same tube as me. C/P and mirror, then re-size 90%. Move to the bottom left corner of frame and tag. Move this layer UNDER the wordart layer.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Tuesday, 13 May 2014
This tutorial was written by me on May 13, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Anna Marine
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: Scraphonored_IB-AnnaMarine-51-1
You can find this kit by Honored Scraps at the Creative Design Outlet HERE
Mask: MPM 7 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 2. Open mask (MPM 7) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 7 – OK. Duplicate and merge down. Re-size 105%.
This will be the frame layer:
Frame 2 – C/P and re-size 70%. Move it down and a bit right on tag. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4. Keep selected.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. I used the CU here. Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
Some elements now:
Element 8 - C/P and move to top left corner of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror.
(see tag for placement)
Element 1 - C/P and to the lower right side of tag. Make sure this layer is also UNDER the frame layer(s). Duplicate and mirror.
(see tag for placement)
Element 20 - C/P and re-size 70%. Move to bottom middle of frame. Make sure this and all the rest of the layers are OVER the frame layer(s).
(see tag for placement)
Element 4 - C/P and re-size 70%. Move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Word Art 1 - C/P and re-size 70%. Move to top middle of tag. Duplicate and on the original element layer, do a drop shadow as described below except for color, use white and do a second drop shadow but for V & H, use -2.
(see tag for placement)
I place the tube layer(s) here:
If you are using the same tube as me. C/P and move her to the far left side of frame. Duplicate and mirror.
(see tag for placement)
New Raster – 800 X 800.
Open Paper 2. Open mask (MPM 7) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 7 – OK. Duplicate and merge down. Re-size 105%.
This will be the frame layer:
Frame 2 – C/P and re-size 70%. Move it down and a bit right on tag. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4. Keep selected.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. I used the CU here. Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
Some elements now:
Element 8 - C/P and move to top left corner of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror.
(see tag for placement)
Element 1 - C/P and to the lower right side of tag. Make sure this layer is also UNDER the frame layer(s). Duplicate and mirror.
(see tag for placement)
Element 20 - C/P and re-size 70%. Move to bottom middle of frame. Make sure this and all the rest of the layers are OVER the frame layer(s).
(see tag for placement)
Element 4 - C/P and re-size 70%. Move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Word Art 1 - C/P and re-size 70%. Move to top middle of tag. Duplicate and on the original element layer, do a drop shadow as described below except for color, use white and do a second drop shadow but for V & H, use -2.
(see tag for placement)
I place the tube layer(s) here:
If you are using the same tube as me. C/P and move her to the far left side of frame. Duplicate and mirror.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Tuesday, 25 March 2014
This tutorial was written by me on March 25, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Anna Marine
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: ScrapFoxy_IB-AnnaMarine-12-3
You can find this kit at the Creative Design Outlet HERE
Mask: MPM Mask 26 by Millie's PSP Madness HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask (MPM 26) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 26 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Frame 3 – C/P and move it up and a bit left. Re-size 75%. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 6. Keep selected.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. I used the CU without the butterflies.
C/P mirror and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to SCREEN.
(see tag for placement)
Some elements now:
Element 2 - C/P and move to upper left corner of tag. Make sure this layer is UNDER the frame layers.
(see tag for placement)
Element 9 - C/P and re-size 80%. Move to top part of frame. Make sure this layer is OVER the frame layers. All other layers will be over frame layers also.
(see tag for placement)
Element 4 - C/P and re-size 50%. Move to bottom middle of frame.
(see tag for placement)
Element 15 - C/P and re-size 50%. Move to bottom left corner of frame.
(see tag for placement)
Element 20 - C/P and re-size 75%. Move to bottom left side of tag.
(see tag for placement)
Element 8 - C/P and re-size 30%. Move to bottom left side of tag, but to the right of element 20.
(see tag for placement)
Element 17 - C/P and re-size 40%. Move to bottom left corner of tag. Place it in front of element 8.
(see tag for placement)
Element 3 - C/P and re-size 25%. Move to bottom left corner and to the left of element 17. Free rotate left 30ยบ.
(see tag for placement)
Wordart - C/P and move to top over frame.
(see tag for placement)
Element 13 - C/P and move a bit to left on tag.
(see tag for placement)
I place the tube layer(s) here:
If you are using the same tube as me, grab her now. Move her to bottom right corner of tag.
(see tag for placement)
New Raster – 800 X 800.
Open Paper 3. Open mask (MPM 26) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 26 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Frame 3 – C/P and move it up and a bit left. Re-size 75%. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 6. Keep selected.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. I used the CU without the butterflies.
C/P mirror and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to SCREEN.
(see tag for placement)
Some elements now:
Element 2 - C/P and move to upper left corner of tag. Make sure this layer is UNDER the frame layers.
(see tag for placement)
Element 9 - C/P and re-size 80%. Move to top part of frame. Make sure this layer is OVER the frame layers. All other layers will be over frame layers also.
(see tag for placement)
Element 4 - C/P and re-size 50%. Move to bottom middle of frame.
(see tag for placement)
Element 15 - C/P and re-size 50%. Move to bottom left corner of frame.
(see tag for placement)
Element 20 - C/P and re-size 75%. Move to bottom left side of tag.
(see tag for placement)
Element 8 - C/P and re-size 30%. Move to bottom left side of tag, but to the right of element 20.
(see tag for placement)
Element 17 - C/P and re-size 40%. Move to bottom left corner of tag. Place it in front of element 8.
(see tag for placement)
Element 3 - C/P and re-size 25%. Move to bottom left corner and to the left of element 17. Free rotate left 30ยบ.
(see tag for placement)
Wordart - C/P and move to top over frame.
(see tag for placement)
Element 13 - C/P and move a bit to left on tag.
(see tag for placement)
I place the tube layer(s) here:
If you are using the same tube as me, grab her now. Move her to bottom right corner of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Thursday, 20 February 2014
This tutorial was written by me on February 20, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Anna Marine
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: Scraphonored IB - Anna Marine - 43-1
You can find this kit at the Creative Design Outlet HERE
Mask: WSL 84 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P10. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P10 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Frame 1 – C/P and move it up and a bit to the right. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4. Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab the CU now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to DODGE.
(see tag for placement)
Some elements now:
Element 10 - C/P and move to top left corner of tag. Duplicate and mirror then flip. Make sure this layer is UNDER all frame layers.
(see tag for placement)
Element 11 - C/P and move to top left corner of tag. Duplicate and mirror then flip. Make sure this layer is UNDER all frame layers.
(see tag for placement)
Element 6 - C/P and move to top right corner of tag. Duplicate and mirror then flip. Move the copy up and a bit right. Make sure this layer is UNDER all frame layers.
(see tag for placement)
Element 8 - C/P and re-size 70%. Move to bottom right corner of tag. Make sure this layer if OVER all frame layers. All other layers will be over this one also.
(see tag for placement)
Element 18 - C/P and re-size 30%. Move to bottom right side of tag over element 8.
(see tag for placement)
Element 5 - C/P and re-size 40%. Move to top middle over frame.
(see tag for placement)
Element 9 - C/P and re-size 40%. Move to top right side of tag.
(see tag for placement)
Element 1 - C/P and move to top left side of tag.
(see tag for placement)
Wordart - C/P and re-size 35%. Move to bottom part of element 8.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and mirror her. Move to far left corner of tag of tag. Now grab the lady bug from the tube. C/P and move to middle and a bit right on tag.
(see tag for placement)
New Raster – 800 X 800.
Open P10. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P10 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Frame 1 – C/P and move it up and a bit to the right. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4. Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab the CU now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to DODGE.
(see tag for placement)
Some elements now:
Element 10 - C/P and move to top left corner of tag. Duplicate and mirror then flip. Make sure this layer is UNDER all frame layers.
(see tag for placement)
Element 11 - C/P and move to top left corner of tag. Duplicate and mirror then flip. Make sure this layer is UNDER all frame layers.
(see tag for placement)
Element 6 - C/P and move to top right corner of tag. Duplicate and mirror then flip. Move the copy up and a bit right. Make sure this layer is UNDER all frame layers.
(see tag for placement)
Element 8 - C/P and re-size 70%. Move to bottom right corner of tag. Make sure this layer if OVER all frame layers. All other layers will be over this one also.
(see tag for placement)
Element 18 - C/P and re-size 30%. Move to bottom right side of tag over element 8.
(see tag for placement)
Element 5 - C/P and re-size 40%. Move to top middle over frame.
(see tag for placement)
Element 9 - C/P and re-size 40%. Move to top right side of tag.
(see tag for placement)
Element 1 - C/P and move to top left side of tag.
(see tag for placement)
Wordart - C/P and re-size 35%. Move to bottom part of element 8.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and mirror her. Move to far left corner of tag of tag. Now grab the lady bug from the tube. C/P and move to middle and a bit right on tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)