Showing posts with label Bibi's Collection. Show all posts
Showing posts with label Bibi's Collection. Show all posts
Thursday, 24 October 2013
This tutorial was written by me on October 24, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Verymany
You can find this tube at Scraps And The City HERE
Please Don't use this tube without a license.
Scrap Kit: Autumn Music by Bibi's Collection HERE
Font: Serendipity Font HERE
Here goes:
Open Paper 1 and WSL 84, then minimize.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and paste Paper 1 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL 84 from the drop down menu – OK. Duplicate and merge down. Re-size 115%.
Now for the frame:
Element 70 - C/P and move to upper left side. Grab your magic wand. Click in the middle of the frame layer.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
C/Paste into selection Paper 8. Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab the close up now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK. Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original layer to SCREEN.
(see tag for placement)
Lets do some more elements now:
Element 25 - C/P and move this layer under the frame and tube layers. Then move to the bottom left, then flip.
(see tag for placement)
Element 44 - C/P and move this layer under the frame and tube layers but above element 25 layer. Then move it to bottom of tag.
(see tag for placement)
Element 28 - C/P and re-size 50%. Move to bottom over frame and tube layers. Place it on the bottom of frame.
(see tag for placement)
Element 26 - C/P and move to the upper right side of tag.
(see tag for placement)
Element 11 - C/P and re-size 70%. Move to top right corner over frame.
(see tag for placement)
Element 42 - C/P and re-size 80%. Move to bottom left corner of tag.
(see tag for placement)
Element 6 - C/P and re-size 40%. Move to bottom left corner of tag in front of element 42.
(see tag for placement)
Element 7- C/P and re-size 50%. Move to bottom left corner of tag to the right side of element 6.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, C/P the full size tube. Re-size 80%. Move to bottom right side of tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday, 13 October 2013
PTU Vampire Diaries
This tutorial was written by me on October 13, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: The Hunter
You can find this tube at Scraps And The City HERE
Please Don't use this tube without a license.
Scrap Kit: Bibi by Bibi's Collection HERE
Mask: WSL 83 HERE
Font: Vampiress Font HERE Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 4. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 83 – OK. Duplicate and merge down. Re-size 110%.
Now for some elements:SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 83 – OK. Duplicate and merge down. Re-size 110%.
Element 46 – C/P and re-size 90%. Move to bottom middle of tag.
(see tag for placement)
Element 111 – C/P and re-size 90%. Move to bottom right side of tag. Duplicate and mirror.
(see tag for placement)
Element 42 – C/P and re-size 70%. Move to upper right side of tag.
(see tag for placement)
Element 75 – C/P and re-size 63%. Move down a little bit but leave it in the middle of tag.
(see tag for placement)
Element 3 – C/P and re-size 90%. Move to bottom left side of tag. Duplicate and move copy to the right.
(see tag for placement)
Element 50 – C/P and re-size 60%. Move to bottom middle of tag over element 75.
(see tag for placement)
Element 111 – C/P and re-size 90%. Move to bottom right side of tag. Duplicate and mirror.
(see tag for placement)
Element 42 – C/P and re-size 70%. Move to upper right side of tag.
(see tag for placement)
Element 75 – C/P and re-size 63%. Move down a little bit but leave it in the middle of tag.
(see tag for placement)
Element 3 – C/P and re-size 90%. Move to bottom left side of tag. Duplicate and move copy to the right.
(see tag for placement)
Element 50 – C/P and re-size 60%. Move to bottom middle of tag over element 75.
(see tag for placement)
Element 14 – C/P and move up to the top of tag.
(see tag for placement)
Element 34 - C/P and move to top left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 30 - C/P and move to top middle of tag.
(see tag for placement)
Element 7- C/P and move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 40 - C/P and re-size 50%. Move to bottom left side in front of element 7.
(see tag for placement)
Element 14 – C/P and move up to the top of tag.
(see tag for placement)
Element 34 - C/P and move to top left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 30 - C/P and move to top middle of tag.
(see tag for placement)
Element 7- C/P and move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 40 - C/P and re-size 50%. Move to bottom left side in front of element 7.
(see tag for placement)
Element 72 - C/P and re-size 85%. Move to bottom middle of tag over element 50.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your favorite version now. C/P and re-size 70%. Leave in the middle of tag.
(see tag for placement)
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your favorite version now. C/P and re-size 70%. Leave in the middle of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Thursday, 3 October 2013
This tutorial was written by me on October 3, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: The Hunter
You can find this tube at Scraps And The City HERE
Please Don't use this tube without a license.
Scrap Kit: Bruja's Town by Bibi's Collection HERE
Mask: WSL 84 HERE
Font: Xtreem Fat Demo Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 6. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
We are going to put some elements on now:
Element 68 - C/P and re-size 70%. Move to bottom of tag.
(see tag for placement)
Element 55 - C/P and re-size 80%. Move to bottom of tag over element 68 and over to the left a little.
(see tag for placement)
Element 23 - C/P and re-size 50%. Move to top right corner of tag.
(see tag for placement)
Let’s do the frame layer now:
New Raster – 800 X 800.
Open Paper 6. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
We are going to put some elements on now:
Element 68 - C/P and re-size 70%. Move to bottom of tag.
(see tag for placement)
Element 55 - C/P and re-size 80%. Move to bottom of tag over element 68 and over to the left a little.
(see tag for placement)
Element 23 - C/P and re-size 50%. Move to top right corner of tag.
(see tag for placement)
Let’s do the frame layer now:
Element 57 - C/P and leave in middle of tag.
Grab your magic wand. Click in the middle of frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open Paper 2. Copy and paste into selection. Keep selected. If you are using the same tube as I am, grab the CU and move it into place.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN
(see tag for placement)
Now for some more elements after tube layers:
Element 56 - C/P and move to the top right side of tag. Duplicate and mirror.
(see tag for placement)
Element 4 - C/P and re-size 80%. Move to top edge of element 57.
(see tag for placement)
Element 40 – C/P and re-size 80%. Move to bottom right corner of tag.
(see tag for placement)
Element 37 - C/P and re-size 80%. Move to bottom right side of tag in front of element 40.
(see tag for placement)
Element 34 - C/P and re-size 40%. Move to bottom right corner in front of element 37.
(see tag for placement)
Element 75 - C/P and re-size 40%. Move to bottom of tag but a bit right of element 37.
(see tag for placement)
Element 1 - C/P and re-size 60%. Move to bottom of tag but a bit to the left of element 75.
(see tag for placement)
Element 61 - C/P and re-size 80%. Move to middle of tag and move it over element 1.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, C/P the version your choosing to use. Re-size by 80%. Move to left side of tag.
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Thursday, 26 September 2013
PTU Magic Bibi
This tutorial was written by me on September 26, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: The Hunter
You can find this tube at Scraps And The City HERE
Please Don't use this tube without a license.
Scrap Kit: Bibi by Bibi's Collection HERE
Mask: WSL 84 HERE
Font: Vtks BlackLet’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 11. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 11 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
Now for some elements:SELECTIONS – SELECT ALL – Copy and paste Paper 11 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
Element 42 – C/P and re-size 75%. Move to upper part of tag.
(see tag for placement)
Element 1 – C/P and move to bottom half of tag.
(see tag for placement)
Element 69 – C/P and re-size 90%. Leave where it lands
(see tag for placement)
Element 44 – C/P and re-size 80%. Move to bottom left side of tag.
(see tag for placement)
Element 57 – C/P and re-size 70%. Move to bottom left side of tag. Duplicate and move copy to the right to make it look like one piece.
(see tag for placement)
Element 39 – C/P and re-size 80%. Move to bottom right side of tag.
(see tag for placement)
Element 1 – C/P and move to bottom half of tag.
(see tag for placement)
Element 69 – C/P and re-size 90%. Leave where it lands
(see tag for placement)
Element 44 – C/P and re-size 80%. Move to bottom left side of tag.
(see tag for placement)
Element 57 – C/P and re-size 70%. Move to bottom left side of tag. Duplicate and move copy to the right to make it look like one piece.
(see tag for placement)
Element 39 – C/P and re-size 80%. Move to bottom right side of tag.
(see tag for placement)
Element 41 – C/P and re-size 40%. Move to bottom right side of tag in front of element 39.
(see tag for placement)
Element 51 - C/P and re-size 50%. Mirror, move to top left corner of tag.
(see tag for placement)
Element 19 - C/P and re-size 60%. Move to bottom left of tag.
(see tag for placement)
Element 38- C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 34 - C/P and re-size 30%. Move to bottom left side of tag on right side of element 38.
(see tag for placement)
Element 41 – C/P and re-size 40%. Move to bottom right side of tag in front of element 39.
(see tag for placement)
Element 51 - C/P and re-size 50%. Mirror, move to top left corner of tag.
(see tag for placement)
Element 19 - C/P and re-size 60%. Move to bottom left of tag.
(see tag for placement)
Element 38- C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 34 - C/P and re-size 30%. Move to bottom left side of tag on right side of element 38.
(see tag for placement)
Element 14 - C/P and re-size 30%. Mirror and move to bottom left corner of tag beside element 19.
(see tag for placement)
Element 21 - C/P and re-size 30%. Move to bottom left corner beside element 14.
(see tag for placement)
Element 28 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 73 - C/P and re-size 30%. Move to bottom right over element 39.
(see tag for placement)
Element 50 - C/P and re-size 25%. Move to top right but left side of element 44.
(see tag for placement)
Element 15 - C/P and re-size 65%. Flip and move up on tag.(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab it now. C/P and re-size 50%. Leave in the middle of tag.
(see tag for placement)
(see tag for placement)
Element 21 - C/P and re-size 30%. Move to bottom left corner beside element 14.
(see tag for placement)
Element 28 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 73 - C/P and re-size 30%. Move to bottom right over element 39.
(see tag for placement)
Element 50 - C/P and re-size 25%. Move to top right but left side of element 44.
(see tag for placement)
Element 15 - C/P and re-size 65%. Flip and move up on tag.(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab it now. C/P and re-size 50%. Leave in the middle of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday, 8 September 2013
PTU Steampunker
This tutorial was written by me
on September 8, 2013.
It was made out of my own
creation and any similarity is purely coincidental.
I used PSPx2 but any version
would work.
Artist: The Hunter
You can find this tube at Scraps And The City HERE
Do not use this tube
unless you have a license.
Scrap Kit: Steampunker by Bibi's Collection
This kit can be found at Scraps And The City HERE
Mask: WSL 84 HERE
Font: Steampunk Font HERE
Here goes:
The Mask Layer:
Open Paper 3.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and Paste Paper 3 into Selection.
The Mask Layer:
Open Paper 3.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and Paste Paper 3 into Selection.
Go to LAYERS – NEW MASK LAYER –
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL84 from the drop down menu – OK. Duplicate and merge down. Re-size 110%.
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL84 from the drop down menu – OK. Duplicate and merge down. Re-size 110%.
The elements:
Element 36 – C/P and move to top left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 20 - C/P and move up but leave in the middle of tag.
(see tag for placement)
Element 20 - C/P and move up but leave in the middle of tag.
(see tag for placement)
Element 12 – C/P and re-size 60%. Move to left side of tag.
(see tag for placement)
Element 38 – C/P and re-size 60%. Move to bottom middle of tag.
(see tag for placement)
Element 88 – C/P and move to the right side of tag.
(see tag for placement)
Element 17 – C/P and move to right side of tag in front of element 88.
Element 17 – C/P and move to right side of tag in front of element 88.
(see tag for placement)
Element 26 – C/P and re-size 70%. Move to left side. Duplicate and mirror.
(see tag for placement)
Element 8 – C/P and move to left side of tag. Duplicate and mirror.
Element 26 – C/P and re-size 70%. Move to left side. Duplicate and mirror.
(see tag for placement)
Element 8 – C/P and move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 81 – C/P and move to upper middle part of tag.
(see tag for placement)
Element 79– C/P and move to left side of tag. Duplicate and mirror.
(see tag for placement)
Now the tube layer:
If you are using the same tube as me, grab tube.
C/P and re-size 75%. Move to bottom middle of tag. Make sure this layer is between the copy of element 26 and element 8.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Wednesday, 21 August 2013
This tutorial was written by me
on August 21, 2013.
It was made out of my own
creation and any similarity is purely coincidental.
I used PSPx2 but any version
would work.
Artist: The Hunter
You can find this tube at Scraps And The City HERE
Do not use these tubes
unless you have a license.
Scrap Kit: Violin by Bibi's Collection
You can be find this kit at Scraps And The City HERE
Mask: Vix Big Mask 018 HERE
Font: Ink In The Meat Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 12. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 12 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find Vix_BigMask 018 – OK.
Duplicate and merge down.
Some Elements now:
Element 9 - C/P and move to upper left. Duplicate and mirror.
(see tag for placement)
Element 3 - C/P and move to left side of tag. Duplicate and mirror then flip.
(see tag for placement)
Element 62 - C/P and move to very bottom right corner.
(see tag for placement)
Element 20 - C/P and move to bottom left corner of tag.
(see tag for placement)
Element 61 - C/P and re-size 40%. Move to bottom left corner.
(see tag for placement)
Let’s do the frame layer now:
Element 38 – C/P and re-size 50%.
Grab your magic wand. Click in the middle of the frame. Don't forget the little pieces that hang down and around a bit.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open Paper 1.
Copy and paste into selection.
Mirror tube. I used the CU of Violin Babes1 tube for this. C/P over paper layer. Re-size 80% and move into position.
SELECTIONS - INVERT - DELETE - INVERT.
Duplicate tube layers.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to DODGE.
(see tag for placements)
Element 36 – C/P and re-size 50%.
Grab your magic wand. Click in the middle of the frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open Paper 11.
Copy and paste into selection.
Mirror tube. I used the CU of Violin Babes 2 tube for this. C/P over paper layer. Re-size 80% and move into position.
SELECTIONS - INVERT - DELETE - INVERT.
Duplicate tube layers.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to LUMINANCE (L) and reduce OPACITY to 40%.
(see tag for placement)
Now for some more elements:
New Raster – 800 X 800.
Open Paper 12. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 12 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find Vix_BigMask 018 – OK.
Duplicate and merge down.
Some Elements now:
Element 9 - C/P and move to upper left. Duplicate and mirror.
(see tag for placement)
Element 3 - C/P and move to left side of tag. Duplicate and mirror then flip.
(see tag for placement)
Element 62 - C/P and move to very bottom right corner.
(see tag for placement)
Element 20 - C/P and move to bottom left corner of tag.
(see tag for placement)
Element 61 - C/P and re-size 40%. Move to bottom left corner.
(see tag for placement)
Let’s do the frame layer now:
Element 38 – C/P and re-size 50%.
Grab your magic wand. Click in the middle of the frame. Don't forget the little pieces that hang down and around a bit.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open Paper 1.
Copy and paste into selection.
Mirror tube. I used the CU of Violin Babes1 tube for this. C/P over paper layer. Re-size 80% and move into position.
SELECTIONS - INVERT - DELETE - INVERT.
Duplicate tube layers.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to DODGE.
(see tag for placements)
Element 36 – C/P and re-size 50%.
Grab your magic wand. Click in the middle of the frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open Paper 11.
Copy and paste into selection.
Mirror tube. I used the CU of Violin Babes 2 tube for this. C/P over paper layer. Re-size 80% and move into position.
SELECTIONS - INVERT - DELETE - INVERT.
Duplicate tube layers.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to LUMINANCE (L) and reduce OPACITY to 40%.
(see tag for placement)
Now for some more elements:
Element 2 – C/P and move to bottom left side of tag.
(see tag for placement)
Element 1 – C/P and move to top right side of tag.
(see tag for placement)
Element 88 – C/P and move it where you like. I moved it down ever so slightly.
(see tag for placement)
Element 54 – C/P and move to the bottom middle of tag.
(see tag for placement)
Element 66 - C/P and move up on tag.
(see tag for placement)
Element 90 - C/P and re-size 50%. Move to bottom over element 54.
(see tag for placement)
Now for the tube layers:
C/P and re-size both tubes 70%. Move Violin Babe 2 to the bottom left. Move Violin Babe 1 to the bottom right.
(see tag for placement)
Add drop shadow to layers of your choosing.
(see tag for placement)
Element 66 - C/P and move up on tag.
(see tag for placement)
Element 90 - C/P and re-size 50%. Move to bottom over element 54.
(see tag for placement)
Now for the tube layers:
C/P and re-size both tubes 70%. Move Violin Babe 2 to the bottom left. Move Violin Babe 1 to the bottom right.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)