Search

SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Thursday 26 February 2015
 
  
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Gertie

This tutorial was written by me on February 26, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Maxine Gadd
You can find this tube at Creative Design Outlet   HERE
Do not use this tube unless you have a license.
Scrap Kit: ScrapLHD_InnerBeauty by Ladyhawwk Designs
You can find this kit at Creative Design Outlet  HERE
Mask: WSL 3 & 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 10.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 10 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
New Raster Layer - Open Paper 5.  Open second mask (WSL 84) and minimize.
SELECTIONS - SELECT ALL - COPY and paste Paper 5 into selection.
Go to LAYERS - NEW MASK LAYER - FROM IMAGE - SOURCE LUMINANCE - CHECKED - from menu, find WSL 84. - OK.  Duplicate and merge down.  Re-size 115%.
(see tag for placement) 
 
This will be the frame layer:   
  Frame 2C/P and re-size 75%.  Leave it where it lands.  Make sure frame 2 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 1.
If you are using the same tube as me, grab it now.  C/P over frame and then move her into position.  Duplicate and move the copy under frame but over paper layer.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your magic wand tool and click in the middle of frame.   
SELECTIONS - INVERT, grab the eraser tool now.  Erase the parts of the original tube you don't want.  SELECTIONS - SELECT NONE.
(see tag for placement)
 
Now onto some elements: 
Element 35 - C/P and move to the upper left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 50 - C/P and move to lower left corner of tag.  Make sure this layer is also UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 23 - C/P and re-size 50%.  Move to bottom middle of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s). 
(see tag for placement)
Element 49 - C/P and re-size 75%.  Move to bottom right corner of frame.
(see tag for placement)
Element 39 - C/P and re-size 50%.  Move to bottom right corner of frame over element 49.
(see tag for placement)
 Element 62 - C/P and move to bottom left corner of tag.
(see tag for placement) 
Element 48 - C/P and re-size 50%.  Move to bottom left side of tag on right side of element 62.
(see tag for placement)
Element 44 - C/P and re-size 50%.  Move to bottom middle of tag in front of element 23.
(see tag for placement)
Element 36 - C/P and re-size 50%.  Move to bottom middle of tag, but just a little bit to the left in front of elements 44 and 48.
(see tag for placement)
Element 7 - C/P and move to bottom right corner of tag in front of element 39.
(see tag for placement)
Element 47 - C/P and re-size 30%.  Move to middle right side of tag over element 7.
(see tag for placement)
 Element 46 - C/P and re-size 50%.  Move to bottom left corner of tag in front of, but to the left of element 62
(see tag for placement)

Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
 
 
   
Wednesday 25 February 2015
 
  
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Valentina

This tutorial was written by me on February 25, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Lightartist_XXX
You can find this tube at Pics For Designs   HERE
Do not use this tube unless you have a license.
Scrap Kit: Spring Walk by Daniela E
You can find this kit at Inspiration Of Scrapfriends  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 3.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement) 
 
This will be the frame layer:   
Frame 3C/P and re-size 75%.  Move it up and a little bit to the top right side of tag.  Make sure element 23 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  NEW RASTER LAYER - C/Paste into selection Paper 4.  SELECTION - SELECT NONE.  Now grab the tube you are using.  If you are using the same one as me, grab the close up now.  C/P and re-size her 40%.  Move her into position.
Frame 2 - C/P and re-size 75%.  Move over top of frame 3.
(see tag for placement)
 
Now onto some elements: 
Element 65 - C/P and re-size 50%.  Move to middle right side of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Element 21 - C/P and re-size 40%.  Move to bottom right side of frame.  Duplicate and mirror.
(see tag for placement)
Element 18 - C/P and re-size 40%.  Move to bottom left side of frame.  Duplicate and mirror.
(see tag for placement)
Element 79 - C/P and re-size 75%.  Move to bottom left side of frame.
(see tag for placement) 
Element 14 - C/P and move to bottom right side of frame over element 79 and copy of element 79.
(see tag for placement)
Element 63 - C/P and re-size 50%.  Move to bottom left side of frame beside element 14.
(see tag for placement)
 Element 1 - C/P and re-size 20%.  Move to bottom middle of tag in front of element 14.
(see tag for placement) 
Element 28 - C/P and re-size 30%.  Mirror and move to bottom right side of element 1.
(see tag for placement)
Element 8 - C/P and re-size 20%.  Mirror and move to bottom right side of element 28.
(see tag for placement)
Element 56 - C/P and re-size 30%.  Move to bottom right corner of tag.
(see tag for placement)
Element 24 - C/P and re-size 40%.  Move to top right hand side of tag over frame.
(see tag for placement)

I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P your choice of the full version of the tube now.  Re-size 30% and move her to the bottom left side of tag over element 63.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Saturday 21 February 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Mardi Gras After Dark

This tutorial was written by me on February 21, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Freya Langford-Sidebottom
I was gifted this tube when she sold at Artistically Inclined Licensing
She no longer sells there and this tube is no longer available.
Remember that tutorials are just a guide and you do not have to use the same materials and artists.
Do not use this tube unless you have a license.
Scrap Kit: Mardi Gras After Dark by Scrappin With Lil Ole Me
You can find this kit at Twilight Scraps  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 22.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 22 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement) 
 
This will be the frame layer:   
Element 40C/P and re-size 75%.  Leave it where it is.  Make sure element 23 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  NEW RASTER LAYER - C/Paste into selection Paper 17Keep selected. 
Now grab the tube you are using.  If you are using the same one as me, grab the close up now.  C/P and re-size her 55%.  Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
 
Now onto some elements: 
Element 92 - C/P and move to bottom left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 48 - C/P and leave it where it lands.  Make sure this layer is also UNDER the frame layer(s).
(see tag for placement)
Element 38 - C/P and re-size 75%.  Move to lower middle of tag over element 48.  Make sure this layer is also UNDER the frame layer(s).
(see tag for placement)
Element 50 - C/P and move to bottom middle of tag over element 38.  Make sure this layer is also UNDER the frame layer(s).
(see tag for placement)
Element 110 - C/P and re-size 65%.  Free rotate 5ยบ left.  Move it so it frames the inner frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s). 
(see tag for placement)
Element 102 - C/P and move to right side of frame.  Duplicate and mirror.
(see tag for placement)
 Element 4 - C/P and move to left side of frame.
(see tag for placement) 
Element 78 - C/P and re-size 75%.  Move to upper right corner of tag.
(see tag for placement)
Element 111 - C/P and re-size 75%.  Move to right side of frame over element 102 and 4.  Duplicate and mirror.
(see tag for placement)
Element 10 - C/P and re-size 50%.  Move to bottom right corner of frame.
(see tag for placement)
Element 106 - C/P and re-size 50%.  Move to bottom middle of frame.
(see tag for placement)
Element 6 - C/P and re-size 30%.  Move to bottom right corner of tag.
(see tag for placement)  

I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P the full version of the tube now.  Move her to the bottom left side of tag over all other layers.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Friday 20 February 2015
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Kittie

This tutorial was written by me on February 20, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Spazzd Art
I bought this tube at Spazzd Art  HERE
Do not use this tube unless you have a license.
Scrap Kit: Amber by Black Widow Creationz
You can find this kit at Spazzd Art  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 11.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 11 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  
Duplicate and merge down.  Re-size 115%.
(see tag for placement) 
 
This will be the frame layer:   
Element 23C/P and re-size 75%.  Leave it where it is.  Make sure element 23 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  NEW RASTER LAYER - C/Paste into selection Paper 12Keep selected.
Element 31 - C/P and re-size 75%.  Move over paper layer where you like.   SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Now grab the tube you are using.  If you are using the same one as me, grab it now.  C/P and re-size her 40%.  Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on NORMAL.
(see tag for placement)
 
Now onto some elements: 
Element 9 - C/P and move to top left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 11 - C/P and re-size 75%.  Move to bottom right corner of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Element 19 - C/P and re-size 40%.  Move to upper left side of frame.
(see tag for placement)
Element 29 - C/P and re-size 50%.  Move to upper left side of frame over element 19.
(see tag for placement)
Element 17 - C/P and re-size 75%.  Move to lower left side of frame.
(see tag for placement)
Element 20 - C/P and re-size 40%.  Move to bottom left side of frame over element 17.
(see tag for placement)
 Element 6 - C/P and re-size 75%.  Move to lower left side of frame over element 20.
(see tag for placement) 
Element 18 - C/P and re-size 40%.  Move to lower left side of frame over element 6.
(see tag for placement)
Element 12 - C/P and re-size 50%.  Move to bottom middle of frame over other layers.
(see tag for placement)

I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P the tube now.  Mirror and re-size her 20%.  Move her to the bottom right corner of tag.
(see tag for placement)
Element 13 - C/P and re-size 50%.  Mirror and move to bottom right corner over tube layer.
(see tag for placement) 
 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Monday 16 February 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU The Thorn

This tutorial was written by me on February 16, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Anna Marine
I bought this tube at Creative Design Outlet  HERE
Do not use this tube unless you have a license.
Scrap Kit: ScrapFoxy_IB-AnnaMarine-34-1 by Foxy's Designz
You can find this kit at Creative Design Outlet  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 3.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement) 
 
This will be the frame layer:   
Frame 3C/P and leave it where it is.   Make sure Frame 3 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.  NEW RASTER LAYER - C/Paste into selection Paper 4Keep selected.
 Frame 2 - C/P and move over Frame 1 so that it looks like it belongs. 
Now grab the tube you are using.  If you are using the same one as me, grab the Close Up now.  C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
  (see tag for placement)
 
Now onto some elements: 
Element 9 - C/P and move to upper left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror then flip.
(see tag for placement)
Element 17 - C/P and move to bottom middle of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Element 12 - C/P and re-size 40%.  Move to bottom right corner of frame.  Duplicate, mirror then flip.
(see tag for placement)
Element 18 - C/P and re-size 40%.  Move to upper right corner of tag.
(see tag for placement)
Element 1 - C/P and re-size 40%.  Move to top right corner of frame. Free rotate 20ยบ right.
(see tag for placement)
Element 7 - C/P and re-size 40%.  Move to bottom left corner of frame.  Move up just a little.  Duplicate twice and move copies around the left corner of frame.
(see tag for placement)
 Element 21 - C/P and re-size 40%.  Move to bottom left corner of frame over element 7 and copies of element 7. 
(see tag for placement) 
Element 20 - C/P and re-size 40%.  Move to bottom left corner of frame, on the left side of element 21.  Duplicate and move to right side of element 21.
(see tag for placement)
Element 10 - C/P and re-size 40%.  Mirror and move to bottom left corner of frame in front of all other elements.
(see tag for placement)
Element 16 - C/P and re-size 40%.  Move to bottom right corner of tag over element 18.
(see tag for placement)
Word Art - C/P and move to top middle of tag.  Use a drop shadow so that it shows up on tag better.  I used the drop shadow described below except that I used the color white instead of black.  I also did a second drop shadow and changed the V & H to -3.
(see tag for placement)
I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P the full version of the tube.  Move her to the bottom middle of tag.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 3
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me