Search

SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Wednesday 25 June 2014
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU If Only
 
This tutorial was written by me on June 25, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Martin Abel
You can find this tube at Creative Design Outlet  HERE
Please Don't use this tube without a license.
Scrap Kit: Scrapwddesignz_IB-MartinAbel-13-1 by Whisprd Designz
You can buy this kit at Creative Design Outlet  HERE
Mask: WSL 84  HERE

Here goes:

Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 3.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 110%.

Now for the frame:
Element 14 - C/P and re-size 80%.  Next, you will want to free rotate the frame 30º left.  Make sure your frame layer is still highlighted.  
Grab your magic wand.  Click in the middle of frame.  
SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4.  Keep selected.
Element 16 - C/P and move over Paper 4.  
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
(see tag for placement)

Lets do some elements now:
Element 18 - C/P and mirror, then move to bottom left corner of tag.  Make sure this layer is UNDER the frame layer and original tube layer.
(see tag for placement)
Element 7 - C/P and move to top middle of tag.  Make sure this layer is also UNDER the frame layer.
(see tag for placement)
Element 5 - C/P and move to top left side of tag.  Free rotate 5º right.  Make sure this layer is also UNDER the frame layer.  Duplicate and mirror.
(see tag for placement)
Element 4 - C/P move to top left corner of tag.  Make sure this layer is also UNDER the frame layer.   Duplicate, mirror then flip.
(see tag for placement)
Element 21 - C/P and move to the top right corner of frame.  This layer is OVER the frame layer.  Erase the parts of the chain the should be behind the frame.
(see tag for placement)
 Word Art - C/P and move to bottom middle of tag.  This layer is also OVER the frame and tube layers.
(see tag for placement)

Now for the tube(s):
If you are using the same tube as me, grab it now.  C/P and move her to the middle of frame so that her legs are sitting on the bottom part of the frame.

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial. 

 
Monday 16 June 2014
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU 1000 Sighs

This tutorial was written by me on June 16, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X2 but any version would work.

Artist: Unholy Vault
These tubes cannot be bought anymore.  Any tube will do.
I bought this when MPT was still open.
Do not use this tube unless you have a license.
Scrap Kit:  1000 Sighs by Devilish Dezines
You can buy this kit @ Digital Chaos  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 1.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 115%.
 
This will be the frame layer:   
Frame 2C/P and re-size 75%.  Leave it where it lands.  Make sure your frame layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 2.  Keep selected.
Now grab the tube you are using.  If you are using the same one(s) as me, grab it now.  I used the CU here.  Move her into position. 
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  
Duplicate the tube layer.  
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.

After I did that, I decided to add another element to the frame layer(s).
I grabbed Element 49.  C/P and moved it where I liked.
SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE.
(see tag for placement)

Now onto some elements: 
Element 5  - C/P and move to upper left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror then flip.
(see tag for placement)
Element 33 - C/P and move to top right corner of tag.  Make sure this layer is also UNDER the frame layer(s).  Duplicate and mirror then flip.
(see tag for placement)
Element 1 - C/P and re-size 50%.  Move to top right side of frame.  Make sure this and all the rest of the layers are OVER the frame layer(s).  Duplicate and mirror.
(see tag for placement)   
Element 21 - C/P and re-size 50%.  Move to bottom middle of frame.  Duplicate and move copy just under the original layer.
 (see tag for placement)
 Element 4 - C/P and re-size 45%.  Move to bottom right side of frame.  Duplicate and mirror.
(see tag for placement)
Element 50 - C/P and re-size 40%.  Move to bottom middle but a bit to the right side of tag in front of element 4.
(see tag for placement)
Element 42 - C/P and re-size 50%.  Move to bottom left side of tag.  Duplicate and mirror.
(see tag for placement)
Element 46 - C/P and move to top left side of tag.
(see tag for placement)
Element 44 - C/P and re-size 20%.  Move to upper right side of frame layer, over element 1 layer.  Duplicate and mirror.  Move the copy up and a little bit more to the right.
(see tag for placement) 

I place the tube layer(s) here:
If you are using the same tube as me.  C/P and move to the bottom left side of tag in front of element 42.
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.

Saturday 14 June 2014
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Little Red
 
This tutorial was written by me on May 13, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Pin Up Toons
You can find this tube at Creative Design Outlet  HERE
Please Don't use this tube without a license.
Scrap Kit: ScrapLHD_IB-PinUpToons-194-2 
You can find this kit by Ladyhawwk Designs at the Creative Design Outlet  HERE
Mask: WSL 84  HERE 

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 3.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 115%.

This will be the frame layer:  
Frame 1C/P and re-size 80%.  Move it up a bit on tag.  Make sure your frame layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 2.  Keep selected.
Now grab the tube you are using.  If you are using the same one(s) as me, grab it now.  I used the CU here.  Re-size 80% and mirror and move her into position. 
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  
Duplicate the tube layer.  
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on BURN.

(see tag for placement)

Some elements now: 
Element 24  - C/P and re-size 50%.  Make sure this layer is UNDER the frame layer(s).  Move to upper left corner of tag.
(see tag for placement)
Element 1 - C/P move up a bit in the middle of tag.  Make sure this layer is also UNDER the frame layer(s).
(see tag for placement)
Element 5 - C/P and re-size 80%.  Move to bottom middle of tag.  Make sure this and all the rest of the layers are OVER the frame layer(s).
(see tag for placement)   
Element 6 - C/P and re-size 30%.  Move to bottom right side of element 5.  Duplicate and mirror.
 (see tag for placement)
 Element 3 - C/P and re-size 40%.  Move to bottom middle left side of tag in front of element 5.
(see tag for placement)
Element 23 - C/P and re-size 25%.  Move to upper right side of tag over frame. 
(see tag for placement)
Element 2 - C/P and re-size 30%.  Move to lower middle left side of tag over element 5.  Duplicate and mirror.
(see tag for placement)
Element 22 - C/P and re-size 25%.  Move it to bottom middle of tag over element 5.
(see tag for placement) 

I place the tube layer(s) here:
If you are using the same tube as me.  C/P and re-size 70%.  Move to bottom right side of tag in front of element 5 layer.
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
Friday 6 June 2014
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU On The Beach
 
This tutorial was written by me on June 6, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X2 but any version will do.

Artist: Alex Prihodko
You can find this tube at Pics For Design  HERE 
Please Don't use this tube without a license. 
Scrap Kit: On The Beach by Graphics Of Fantasy 
This kit can be found at Graphics Of Fantasy.  HERE 
Mask: MBL Exclusive # 7  HERE

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800. Re-size 105%.
Open Paper 3.  Open mask (MBL Ex 7) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MBL Ex 7 – OK.  Duplicate and merge down.

 Lets do some elements now:

Element 80 - C/P and re-size 70%.  Move to top middle of tag.
(see tag for placement)
Element 30  - C/P and move to far left side of tag.  Duplicate 4 times and move into place.  I did a couple of mirrors and just moved on to the middle.
(see tag for placement)
Element 25 - C/P and Move to lower right side of tag.  Duplicate and mirror.
(see tag for placement)
Element 2 - C/P and re-size 60%.  Move to top left side of copy of element 25.  Duplicate and mirror.
(see tag for placement)
Element 13 - C/P and re-size 70%.  Move to middle of tag.
(see tag for placement)
Element 15 - C/P and re-size 50%.  Move to middle of tag over element 13.
(see tag for placement)
Element 82 - C/P and Move to bottom right side of tag.  Duplicate and mirror.  Move copy up just a little.
(see tag for placement)
Element 84 - C/P and re-size 90%.  Move to far right side of tag.
(see tag for placement)
Element 83 - C/P and re-size 90%.  Move to far left side of tag.
(see tag for placement)
Element 24 - C/P and re-size 60%.  Move to middle right side of tag.
(see tag for placement)
Element 12 - C/P and re-size 70%.  Move to middle right side of tag in front of element 24.
(see tag for placement)
Element 85 - C/P and move to top right side of tag.
(see tag for placement)

Now for the tube(s):
If you are using the same tube as me, grab it now.  C/P and re-size 50%. Move her to the lower middle of tag.

More elements now:
Element 49 - C/P and to lower right side of tag.
(see tag for placement)
Element 60 - C/P and re-size 30%.  Mirror and move to upper left side of tag over Element 83.
(see tag for placement)
Element 21 - C/P and move to bottom left side of tag.  Duplicate and mirror.
(see tag for placement)
Element 20 - C/P and move to bottom left side of tag over element 21.  Duplicate and mirror.
(see tag for placement)
Word Art 4 - C/P and move to bottom middle of tag.(see tag for placement)

I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

Save and add name and © info.
Let me know what you think of this tutorial. I would love to see any results. 
 
 
Wednesday 4 June 2014
   
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Mysique
 
This tutorial was written by me on June 4, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Rachel Anderson
You can find this tube at Creative Design Outlet  HERE
Please Don't use this tube without a license.
Scrap Kit: ScrapBCS_IB-RachelAnderson-18-2 by Babycakes Scraps
You can buy this kit at Creative Design Outlet  HERE
Mask: WSL 84  HERE

Here goes:

Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 5.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 5 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 110%.

Now for the frame:
Element 19 - C/P and leave it where it lands.  Make sure your frame layer is still highlighted.  Grab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 2.  Keep selected.
Now grab the tube you are using.  If you are using the same one as me, grab it now.  C/P over frame and then move her into position.  Duplicate and move the copy under frame.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your magic wand again.  Go to frame layer and click in the middle of frame again.  Grab the eraser tool now.  SELECTION - INVERT and go to original tube layer and then erase the bottom parts of tube you don't want.
Element 32 - C/P and move over paper layer.  Re-size 50% and move to top of paper layer.  Duplicate and mirror, then flip.  
(see tag for placement)

Lets do some elements now:
Element 11 - C/P and move to top right side of tag.  Make sure this layer is UNDER the frame layer and original tube layer.  Duplicate and mirror.
(see tag for placement)
Element 5 - C/P and move to top left side of tag.  Make sure this layer is also UNDER the frame layer.  Duplicate and mirror then flip.
(see tag for placement)
Element 15 - C/P and move to bottom of from.  Make sure this layer is OVER the frame layer(s).  All other layers will be over the frame layer too.
(see tag for placement)
Element 25 - C/P and re-size 30%.  Mirror and move to top right side of frame.
(see tag for placement)
Element 12 - C/P and re-size 50%.  Move to bottom right corner of frame.  Duplicate and mirror.
(see tag for placement)
Element 4 - C/P and re-size 70%.  Move to bottom middle of tag over element 15.
(see tag for placement)
Element 31 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 23 - C/P and move to top right corner of tag.  Mirror.
(see tag for placement)

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial. 

  

My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me