Search

Loading...

My Blinkies

 photo LisesBlinkieDone_zpsf5c4ce97.gif
SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Labels

Followers

Monday, 14 April 2014

 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Nelly
 
This tutorial was written by me on April 14, 2014.  
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Verymany 
You can find this tube at the Verymany Tube Store  HERE 
Please Don't use this tube without a license.
Scrap Kit: Marlene by Devilish Dezines
You can buy this kit at Scraps & Company  HERE 
Mask: WSL 84  HERE 

Here goes:

Let’s start with the mask layer:
New Raster – 900 X 900.
Open Paper 4.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 120%.

Now for the frame:
Cluster 3 - C/P and move down towards the bottom of tag just a little bit.  Make sure your cluster frame layer is still highlighted.  Grab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 5.  What I did now was to grab ELEMENT 32.  C/P and move to right side of paper layer.  
SELECTION - INVERT - DELETE - SELECTIONS - INVERT.  Keep selected.
Now grab the tube you are using.  If you are using the same one(s) as me, grab it now.  I used the CU here. 
C/P and re-size 80%.  Move her into position. 
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  
Duplicate the tube layer.  
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to SCREEN.

(see tag for placement)

Lets do some elements now:
Element 18 - C/P and move to left side of tag.  Make sure this layer is UNDER all the frame layer(s).  Duplicate and mirror then flip.
(see tag for placement)
Element 39 - C/P and move to right side of tag.  Make sure this layer is also UNDER all frame layer(s).
(see tag for placement)
Element 4 - C/P and move to right side of tag OVER all other layer(s).
(see tag for placement)
Element 30 - C/P and move to far right side of tag.
(see tag for placement)

I place the tube layer(s) here:
If you are using the same tube as me, choose the look you want for her.  C/P and mirror.  Re-size 60%.  Move to bottom middle of tag.
(see tag for placement)

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
 photo BlogSiggie1.png
Sunday, 6 April 2014
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Hatter
 
This tutorial was written by me on April 6, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Deacon Black
You can find this tube at Creative Design Outlet  HERE
Please Don't use this tube without a license.
Scrap Kit: ScrapLHD_IB-DeaconBlack-107-3 
You can find this kit at the Creative Design Outlet  HERE
Mask: MPM Mask 7 by Millie's PSP Madness  HERE 

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 1.  Open mask (MPM 7) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 7 – OK.  Duplicate and merge down.  Re-size 110%.

This will be the frame layer:  
Frame 1C/P and move it up on tag.  Re-size 80%.  Make sure your frame layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 3.  Keep selected.
Now grab the tube you are using.  If you are using the same one(s) as me, grab it now.  I used the CU here. 
C/P and re-size 80%.  Move her into position. 
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  
Duplicate the tube layer.  
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to BURN.

(see tag for placement)

Some elements now: 
Element 8 - C/P and move to upper left corner of tag.  Make sure this layer is UNDER the frame layers.  Duplicate and mirror.
(see tag for placement)
Element 25 - C/P and move to top right side of frame.  Make sure this layer is also UNDER the frame layers.  Duplicate and mirror.
(see tag for placement)
Element 19 - C/P and move to bottom left side of frame.  Make sure this layer is OVER all the frame layers.  All other layers will be OVER the frame layers.
(see tag for placement)   
Element 30 - C/P and re-size 70%.  Move to bottom middle beneath frame.
 (see tag for placement)
 Element 5 - C/P and re-size 40%.  Move to top left corner of tag.
(see tag for placement)
Element 22 - C/P and re-size 40%.  Move to bottom middle of tag over element 30.
(see tag for placement)
Element 23 - C/P and re-size 30%.  Move to bottom middle right side of  element 30.
(see tag for placement)
Element 21 - C/P and move to top right side of tag.
(see tag for placement)
Element 6 - C/P and mirror.  Move to bottom right corner of frame.
(see tag for placement)
Element 27 - C/P and re-size 30%.  Move to middle of element 6.
(see tag for placement)
Element 12 - C/P and re-size 50%.  Mirror and move to left side of element 6.
(see tag for placement)
Element 26 - C/P and mirror.  Move to bottom right corner of tag.
(see tag for placement)   

I place the tube layer(s) here:
If you are using the same tube as me, you need to re-size the tag before you add her.  Re-size the whole tag from 800 X 800 to 600 X 600.  C/P and move her to bottom left corner of tag.
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
 photo BlogSiggie1.png
Saturday, 5 April 2014
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Fairy Princess of Autumn
 
This tutorial was written by me on April 5, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Enys Guerrero
You can find this tube at Creative Design Outlet  HERE
Please Don't use this tube without a license.
Scrap Kit: Devil by Devilish Designs
You can buy this kit at Scraps & Company  HERE
Mask: Moonbeams and Spiderwebs Mask 14  HERE

Here goes:

Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 2.  Open mask (MBSW 22) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MBSW 22 – OK.  Duplicate and merge down.  Re-size 110%.

Now for the frame:
Cluster 4 - C/P and move down towards the bottom of tag just a little bit.  Make sure your cluster frame layer is still highlighted.  Grab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4.  Keep selected.
Now grab the tube you are using.  If you are using the same one as me, grab it now.  C/P over cluster and then move her into position.  Duplicate and move that copy under frame.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your magic wand again.  Go to frame layer and click in the middle of frame again.  Grab the eraser tool now.  SELECTION - INVERT and go to original tube layer and then erase the bottom parts of tube.
(see tag for placement)

Lets do some elements now:
Element 24 - C/P and move to left side of tag.  Make sure this layer is UNDER the frame layer and original tube layer.  Duplicate and mirror.
(see tag for placement)
Element 12 - C/P and re-size 45%.  Move to left side of tag.  Make sure this layer is also UNDER the original tube layer, but over the cluster frame layer.  All other layers should be under the original tube layer also.  Duplicate and mirror.
(see tag for placement)
Element 10 - C/P and re-size 30%.  Move to middle right side of cluster frame.
(see tag for placement)
Element 8 - C/P and re-size 20%.  Move to top right side of tag.  Duplicate and mirror, then flip.  Move that copy to upper left side of tag.
(see tag for placement)
Element 34 - C/P and re-size 25%.  Move to bottom middle of tag.
(see tag for placement)
Element 19 - C/P and Move to right middle of cluster frame.  Duplicate and mirror.  Should look like it is flying out of the frame from behind tube.
(see tag for placement)

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
 photo BlogSiggie1.png
Friday, 4 April 2014
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Bunny
 
This tutorial was written by me on April 4, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X2 but any version will do. 

Artist: Verymany
You can find this tube at Verymany Tubes Store  HERE
Please Don't use this tube without a license.
Scrap Kit: Easter Fairy Tale 1 by Tootypup Scraps
This kit can be found at Scraps From The Heart Store.  HERE
Mask: WSL 84  HERE

Here goes:

Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 6.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 115%.

 Lets do some elements now:

Sparkly Ground 1 - C/P and re-size 50%.  Move to bottom left side of tag.  Duplicate and mirror.  Move up just a little bit.
(see tag for placement)
Easter Tree 2 - C/P and re-size 80%.  Move to middle right side of tag.
(see tag for placement)
Easter Tree 1 - C/P and re-size 90%.  Move to middle left side of tag.
(see tag for placement)
Tear Leaves - C/P and re-size 70%.  Move to middle right side of tag.  Duplicate and mirror.
(see tag for placement)
Easter Bridge 1 - C/P and re-size 80%.  Move to bottom right side of tag.
(see tag for placement)
Shroom 9 - C/P and re-size 30%.  Move to bottom left side of tag in front of Easter Bridge.
(see tag for placement)
Silver Fairy 2 - C/P and re-size 30%.  Sit her on the top of the Shroom.
(see tag for placement)
Butterfly 3 - C/P and re-size 15%.  Move to the bottom middle of tag in front of Easter Bridge.
(see tag for placement)
Bunny Egg 2 - C/P and re-size 20%.  Move to bottom right side of tag.
(see tag for placement)

Now for the tube(s):
If you are using the same tags as me, grab it now.  C/P and re-size 40%. Mirror and move her to the bottom right side of tag.

I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

Save and add name and © info.
Let me know what you think of this tutorial. I would love to see any results. 
 
 
 photo BlogSiggie1.png
Thursday, 3 April 2014
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Shade
 
This tutorial was written by me on April 3, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Selina Fenech
I bought this tube at Creative Design Outlet
Unfortunately, Selina Fenech no longer sells PSP tubes.
Please Don't use this tube without a license.
Scrap Kit: Scrap CCS_IB-Enamorte-27-3
You can find this kit by Creative Crazy Scraps
at the Creative Design Outlet  HERE
Mask: WSL 84  HERE 

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 3.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 115%.

This will be the frame layer:  
Frame 2 – C/P and move it up and a bit left.  Re-size 75%.  Make sure your frame layer is still highlighted.  Grab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 4 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 6.  Keep selected.
Now grab the tube you are using.  If you are using the same one as me, grab it now.  I used the CU without the crow. 
C/P mirror and move her into position. 
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  
Duplicate the tube layer.  
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to SCREEN.

(see tag for placement)

Some elements now: 
Element 12 - C/P and move to upper right corner of tag.  Make sure this layer is UNDER the frame layers.
(see tag for placement)
Element 11 - C/P and move to bottom of frame.  Make sure this layer is OVER the frame layers.  All other layers will be over frame layers also.
(see tag for placement)
Element 5 - C/P and re-size 50%.  Move to bottom middle of frame over element 11.
(see tag for placement)   
Element 4 - C/P and re-size 65%.  Move to lower middle of frame area.
(see tag for placement)
 Element 16 - C/P and re-size 40%.  Move to top left corner of frame.  Grab your eraser tool and erase the parts that show over the frame.
(see tag for placement)
Element 14 - C/P and re-size 50%.  Move to bottom left side of tag.
(see tag for placement)
Element 20 - C/P and re-size 30%.  Move to bottom left corner of tag but to right side of element 14.
(see tag for placement)
Element 15 - C/P and re-size 50%.  Move to bottom left corner of tag over element 20.  Grab your eraser tool again and erase the parts of the cuffs so that it looks like it is wrapped around the chalice.
(see tag for placement)
Element 13 - C/P and re-size 20%. Move to bottom left corner, but to the right of element 15.
(see tag for placement)
Element 17 - C/P and re-size 20%.  Move to bottom left corner but to the right of element 20.
(see tag for placement)
Element 7 - C/P and re-size 20%.  Move to bottom left corner but to the left of element 15.
(see tag for placement)
Element 6 - C/P and re-size 50%.  Move to bottom left corner over element 15.
(see tag for placement)   

I place the tube layer(s) here:
If you are using the same tube as me, grab her now.  Move her to bottom right side of tag.  I also used a white drop shadow on the tube so it would stand out a bit.  I used the same settings as below.
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
 photo BlogSiggie1.png
Tuesday, 25 March 2014
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Butterfly
 
This tutorial was written by me on March 25, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Anna Marine
You can find this tube at Creative Design Outlet  HERE
Please Don't use this tube without a license.
Scrap Kit: ScrapFoxy_IB-AnnaMarine-12-3  
You can find this kit at the Creative Design Outlet  HERE
Mask: MPM Mask 26 by Millie's PSP Madness  HERE 

Here goes:

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 3.  Open mask (MPM 26) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 26 – OK.  Duplicate and merge down.  Re-size 115%.

This will be the frame layer:  
Frame 3C/P and move it up and a bit left.  Re-size 75%.  Make sure your frame layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 6.  Keep selected.
Now grab the tube you are using.  If you are using the same one(s) as me, grab it now.  I used the CU without the butterflies. 
C/P mirror and move her into position. 
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.  
Duplicate the tube layer.  
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to SCREEN.

(see tag for placement)

Some elements now: 
Element 2 - C/P and move to upper left corner of tag.  Make sure this layer is UNDER the frame layers.
(see tag for placement)
Element 9 - C/P and re-size 80%.  Move to top part of frame.  Make sure this layer is OVER the frame layers.  All other layers will be over frame layers also.
(see tag for placement)
Element 4 - C/P and re-size 50%.  Move to bottom middle of frame.
(see tag for placement)   
Element 15 - C/P and re-size 50%.  Move to bottom left corner of frame.
(see tag for placement)
 Element 20 - C/P and re-size 75%.  Move to bottom left side of tag.
(see tag for placement)
Element 8 - C/P and re-size 30%.  Move to bottom left side of tag, but to the right of element 20.
(see tag for placement)
Element 17 - C/P and re-size 40%.  Move to bottom left corner of tag.  Place it in front of element 8.
(see tag for placement)
Element 3 - C/P and re-size 25%.  Move to bottom left corner and to the left of element 17.  Free rotate left 30º.
(see tag for placement)
Wordart - C/P and move to top over frame.
(see tag for placement)
Element 13 - C/P and move a bit to left on tag.
(see tag for placement)   

I place the tube layer(s) here:
If you are using the same tube as me, grab her now.  Move her to bottom right corner of tag.
(see tag for placement)


Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
 photo BlogSiggie1.png
Sunday, 23 March 2014
 CT tags for Rieneke Designs.
I used the gorgeous kit Passionate.
You can find this kit at Twilight Scraps  HERE

I used the gorgeous tube by Verymany and can be
found at Pics For Design  HERE
and an equally gorgeous tube by Enys Guerrero and can
be found at Creative Design Outlet   HERE





 photo BlogSiggie1.png

My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me

Proud CT Member Of

 photo ddblinkie.png
 photo RZfanof_byevolangelscrapz.gif
 photo RZfanof_byevolangelscrapz.gif
 photo ddblinkie.png
 photo ddblinkie.png
 photo ddblinkie.png

Store Blinkies for Stores I Like

Blinkies for Blogs I Like To Follow