Showing posts with label Sandy's Designs. Show all posts
Showing posts with label Sandy's Designs. Show all posts
Tuesday, 26 November 2013
This tutorial was written by me on November 26, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Roman Zaric
You can find this tube at Roman Zaric Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Tamy by Sandy's Designs HERE
Mask: WSL 116 HERE
Font: Lobster 1.4 Font HERE
Here goes:
Open P2 and WSL 116, then minimize.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and paste P2 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL 116 from the drop down menu – OK. Re-size 105%.
Now for the frame:
Element 4 - C/P and re-size 75%. Free Rotate 90º right. Grab your magic wand. Click in the middle of the frame layer.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
C/Paste into selection P6. Keep selected.
Now grab the tube you are using. If you are using the same one as me, C/P and re-size 40%. Move her into position.
Duplicate the tube layer. Move the copy layer under frame layer. Delete extra hanging under frame layer. Highlight original tube layer. Grab your eraser tool. Erase the parts of her legs that is hanging OVER the frame.
(see tag for placement)
Lets do some more elements now:
Element 16 - C/P move under frame layer. Move to top left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 24 - C/P move under frame layer. Move to top of tag. Duplicate and flip.
(see tag for placement)
Element 21 - C/P and move to and a bit to the left side of tag. Duplicate and mirror then flip.
(see tag for placement)
Element 11 - C/P and move this layer over the frame layer. Place it on the left top corner of frame. Duplicate and mirror.
(see tag for placement)
Element 1 - C/P and leave in the middle of tag but move it up just a little in the frame.
(see tag for placement)
Element 2 - C/P and re-size 80%. Move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Element 8 - C/P and re-size 80%. Move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Element 9 - C/P and re-size 80%. Move to bottom middle of frame over tube.
(see tag for placement)
Element 14 - C/P and re-size 50%. Move to bottom middle of tag over element 9 layer.
(see tag for placement)
Element 34 - C/P and re-size 40%. Move to bottom right side of element 14.
(see tag for placement)
Element 31 - C/P and re-size 30%. Move to bottom right side of tag, but to the left of element 34.
(see tag for placement)
Element 33 - C/P and re-size 35%. Move to bottom left side of element 14.
(see tag for placement)
Element 32 - C/P and re-size 30%. Move to bottom right side of element 31.
(see tag for placement)
Element 12 - C/P and re-size 40%. Move to bottom left side of element 14.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom left side of element 12.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Monday, 26 August 2013
This tutorial was written by me on August 26, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Arthur Crowe
You can find this tube at Arthur Crowe's Factory HERE
Please Don't use this tube without a license.
Scrap Kit: Beauty In Autumn by Sandy's Design HERE
Mask: WSL 84 HERE
Font: Amal-Vic Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P2. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste P2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
New Raster – 800 X 800.
Open P2. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste P2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
Now for some elements:
Glitter 3 – C/P and move to top right corner. Duplicate and mirror.
(see tag for placement)
Stickwreath2 – C/P and move up a little and to the right a little.
(see tag for placement)
(see tag for placement)
Let’s do the frame layer now:
Frame4 – C/P and move up a little and to the right a little over the stickwreath2 layer. Grab your magic wand. Click in the middle of frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open P6.
Copy and paste into selection. Keep selected.
Autumn tree - Copy and paste into selection. Keep selected.
If you are using the same tube as me, grab the medium CU version and C/P it now. Move it into position. SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.
(see tag for placements)
Frame4 – C/P and move up a little and to the right a little over the stickwreath2 layer. Grab your magic wand. Click in the middle of frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open P6.
Copy and paste into selection. Keep selected.
Autumn tree - Copy and paste into selection. Keep selected.
If you are using the same tube as me, grab the medium CU version and C/P it now. Move it into position. SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.
(see tag for placements)
Now for some more elements:
Fall Leaf3 – C/P and re-size 50%. Move to top left side of frame. Duplicate and mirror. Move leaf on other side of frame. Leave some space between original and copy.
(see tag for placement)
Flower – C/P and re-size 50%. Move up and between both leaf layers.
(see tag for placement)
(see tag for placement)
Ivy – C/P and re-size 70%. Move to left side. Mirror and flip. Move down just a little. Duplicate and mirror again.
(see tag for placement)
Leaves1 – C/P and Move to bottom over other elements. Duplicate and mirror.
(see tag for placement)
Butterflys – C/P and move a bit left and a bit down.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab the full size tube.
C/P and re-size 70%. Move to left side of tag.
(see tag for placement)
More Elements now:
(see tag for placement)
Leaves1 – C/P and Move to bottom over other elements. Duplicate and mirror.
(see tag for placement)
Butterflys – C/P and move a bit left and a bit down.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab the full size tube.
C/P and re-size 70%. Move to left side of tag.
(see tag for placement)
More Elements now:
Basket 1 – C/P and re-size 55%. Mirror and move to bottom right corner.
(see tag for placement)
Fruit basket – C/P and re-size 50%. Mirror and move to bottom right corner in front of basket 1.
(see tag for placement)
Autumn Cupcake – C/P and re-size 20%. Move to bottom right corner in front of fruit basket.
(see tag for placement)
Autumn Leaves Cupcake – C/P and re-size 20%. Move to bottom right corner in front of autumn cupcake
(see tag for placement)
Fawn 2 – C/P and re-size 60%.Move to bottom left corner in front of tube.
(see tag for placement)
Fawn 1 – C/P and re-size 60%. Move to bottom left corner in front of fawn 2.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday, 21 July 2013
*Right Click - Open Link In New
Tab - On All Images To View Full Size*
PTU Sweetness
This tutorial was written by me
on July 21, 2013.
It was made out of my own
creation and any similarity is purely coincidental.
I used PSPx2 but any version
would work.
Artist: Arthur Crowe
You can find his tubes
at Arthur Crowe’s Factory HERE
Do not use this tube
unless you have a license.
Scrap Kit: Sweetness by Sandy's Designs
You can find this kit at Arthur Crowe's Factory
Mask: WSL 84 HERE
Font: Pristina Font HERE
Here goes:
Let’s start
with the mask layer:
New
Raster – 800 X 800.
Open P9. Open mask and minimize.
SELECTIONS
– SELECT ALL – Copy and paste P9 into selection. Go to LAYERS –
NEW
MASK LAYER – FROM IMAGE – SOURCE LUMINACE - CHECKED – from drop down menu, find WSL 84 – OK. Duplicate and merge
down. Re-size mask 110%
Let’s do the frame layer for now:
Frame 2 – C/P and leave in middle but move up a little.
Grab your magic wand. Click
in the middle of all frames.
SELECTIONS – MODIFY – EXPAND 4
PIXELS.
New Raster Layer. Move under frame layer. Open P12. Copy and paste into
selection.
SELECTIONS - SELECT NONE.
Grab magic wand again. Click inside first frame.
SELECTIONS - MODIFY - EXPAND 4 PIXELS.
Open tube if you are using the same one as
me. C/P full size tube. Re-size 80% and move where desired. I re-sized the half CU 80%
SELECTIONS – INVERT – DELETE – SELECTIONS - SELECT NONE.
Do this for all other frames. I used different color hair for them all and use half CU for middle frame
Merge all tube layers down to make one layer. Duplicate this tubes layer.
ADJUST – BLUR – GAUSSIAN BLUR –
RADIUS 25 - OK
Change BLEND MODE of copy of tube
layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.
(see tag for placements)
Now for some elements:
Deco 1 – C/P and move to lower right corner of tag. Duplicate, mirror and flip.
(see tag for placement)
Heart Wire 1 – C/P and move to upper middle of tag.
(see tag for placement)
Cake Stick 2 – C/P and move to left side of tag above frame.
(see tag for placement)
Cake Stick 1 – C/P and move to right side of tag above frame.
(see tag for placement)
Ribbon 2 – C/P and re-size 70%. Move to bottom middle of tag over frame.
(see tag for placement)
Girl Balloon – C/P and move to bottom
right side of tag.
(see tag for placement)
Dog – C/P and move to
bottom right side of tag.
(see tag for placement)
Lollipop 1 – C/P and re-size 70%. Move to left side of middle. Free rotate left 20º.
(see tag for placement)
Lollipop 2 – C/P and re-size 70%. Move to right side of middle. Free rotate right 20º
(see tag for placement)
Candy Stick 1 – C/P and re-size 60%. Move down and to the right in front of Lollipop.
(see tag for placement)
Candy Stick 2 – C/P and re-size 60%. Move down and to the left in front of Lollipop.
(see tag for placement)
Heart Box – C/P and re-size 40%. Move to bottom and bit to left of tag in front of candy stick 2.
(see tag for placement)
Strawberry Cake 1 – C/P and re-size 40%. Move to bottom middle of tag.
(see tag for placement)
Strawberry 1 – C/P and re-size 40%. Move to the bottom and a little to the right of tag.
(see tag for placement)
Bonbon 1 – C/P and re-size 30%. Move to right side in front of all candy pieces
(see tag for placement)
Bonbon 2 – C/P and re-size 30%. Move to left side in front of all candy pieces.
(see tag for placement)
Now the tube layer:
If you are using the same tube as
me,
C/P full size tube and re-size 50%.
Mirror and move to the left side of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)