Search

SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Friday 5 December 2014
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Traditional Christmas

This tutorial was written by me on December 5, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Trinita
I got this tube as a gift from Pics For Design  HERE
But any tube will do.  They have lots to choose from.
Do not use this tube unless you have a license.
Scrap Kit: Traditional Christmas by Rieneke Designs
You can find this kit at Twilight Scraps  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 15.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 15 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  
Duplicate and merge down.  Re-size 115%.
(see tag for placement) 
 
This will be the frame layer:   
Element 132C/P and move it up just a little.  Make sure element 132 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 18.  Keep selected.
Now grab the tube you are using.  If you are using the same one as me, grab it now.  C/P and re-size 45%, then move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on LUMINANCE (L) and reduce opacity to 50%.
(see tag for placement)

Now onto some elements: 
Element 142 - C/P and move upper left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and move copy to bottom right corner of tag.
(see tag for placement)
Element 135 - C/P and re-size 75%.  Move to bottom middle of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Element 131 - C/P and re-size 65%.  Move to bottom right corner of frame.  Duplicate and mirror.
(see tag for placement)
Element 24 - C/P and re-size 40%.  Move to top left corner of frame.
(see tag for placement)
Element 5 - C/P and re-size 20%.  Move to top left corner of frame over element 24.
(see tag for placement)   
Element 102 - C/P and re-size 65%.  Move to bottom left corner of tag.
(see tag for placement)
 Element 67- C/P and re-size 25%.  Move to bottom left side of tag in front of element 102.
(see tag for placement)
Element 43 - C/P and re-size 20%.  Move to bottom left corner of tag in front of element 102 and 67.
(see tag for placement)
Element 47 - C/P and re-size 20%.  Move to bottom left corner in front of element 102 and 67 but to the right side of element 43.
(see tag for placement)
Element 55 - C/P and re-size 20%.  Move to bottom left corner of tag in front of element 102 and 67 and to the right of element 47.
(see tag for placement)
Element 44 - C/P and re-size 20%.  Move to bottom left corner of tag in front of element 43.
(see tag for placement)
Element 46 - C/P and re-size 20%.  Move to bottom left corner of tag in front of element 55 and to the right of element 44.
(see tag for placement) 
Element 28 - C/P and re-size 20%.  Move to bottom left corner of tag in front of element 47.
(see tag for placement)
Element 77 -  C/P and re-size 40%.  Move to bottom right corner of tag.
(see tag for placement) 
Element 78 - C/P and re-size 25%.  Move to bottom right side of tag over element 77.
(see tag for placement) 
Element 11 - C/P and re-size 35%.  Move to top right corner of tag.
(see tag for placement)
Element 19 - C/P and re-size 50%.  Move to bottom middle but a bit left on tag.
(see tag for placement)

I placed the tube layer(s) here: 
If you are using the same one as me, grab your chosen version now.  C/P and re-size 40%.  Move to bottom and a bit to the right side of tag.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Saturday 29 November 2014
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Sweet Christmas

This tutorial was written by me on November 29, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: PinUp Toons
I bought this tube at Creative Design Outlet  HERE
Do not use this tube unless you have a license.
Scrap Kit: Sweet Christmas Kit by Scrappin With Lil Ole Me
You can find this kit at Mystical Scraps  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 10.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 10 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  
Duplicate and merge down.  Re-size 115%.
(see tag for placement) 
 
This will be the frame layer:   
Element 79C/P and move it up just a little.   
Element 92 - C/P and re-size 95%.  Move this over element 79.
Make sure Element 92 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 9.  Keep selected.
Now grab the tube you are using.  If you are using the same one as me, grab the close up now.  C/P and re-size 75%.  Move her into position. 
SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE.
Duplicate the tube layer.  Change blend mode on both tube layers to MULTIPLY.
(see tag for placement)

Now onto some elements: 
Element 38 - C/P and move to lower left corner of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 55 - C/P and move to lower right side of tag.  Make sure this layer is also UNDER the frame layer(s).
(see tag for placement)
Element 67 - C/P and re-size 80%.  Move to bottom middle of tag. 
Make sure this layer is also UNDER the frame layer(s).
(see tag for placement)
Element 53 - C/P and re-size 50%.  Move to bottom left side of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s). 
(see tag for placement)
Element 51 - C/P and re-size 50%.  Move to the lower left side of frame in front but a bit to the right of element 53.
(see tag for placement)   
Element 21 - C/P and re-size 25%.  Move to bottom left side of frame in front of element 53.
(see tag for placement)
 Element 60- C/P and re-size 25%.  Move to bottom left side of frame in front of element 51.
(see tag for placement)
Element 52 - C/P and re-size 20%.  Move to bottom middle of tag.
(see tag for placement)
Element 9 - C/P and re-size 25%.  Move to bottom left corner of tag.
(see tag for placement)
Element 10 - C/P and re-size 25%.  Move to bottom left side of tag but on the right side of element 9.
(see tag for placement)
Element 8 - C/P and re-size 25%.  Move to bottom left side of tag but on the right side of element 10.
(see tag for placement)
Element 104 - C/P and re-size 50%.  Move to top left corner of tag.  Duplicate twice.  Move one copy to the right corner of tag.  Move one copy to the top middle of tag.
(see tag for placement)

I placed the tube layer(s) here: 
If you are using the same one as me, grab your chosen version now.  C/P and re-size 80%.  Move to bottom right corner of tag.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Happy Anniversary
 
This tutorial was written by me on November 29, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx6 but any version will do. 

Artist: Verymany
You can find this tube at Pics For Design  HERE
 Please Don't use these tubes without a license.
Scrap Kit: Anniversary Kit by Devilish Dezines
You can buy this kit at Scraps N Company  HERE
Mask: WSL 84  HERE 

Here goes:

Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 6.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 115%.

Now for the frame:
Frame 3 - C/P and move a bit down, but keep in the middle of tag.  Make sure your frame layer is still highlighted.  Grab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4.  Keep selected.
If you are using the same tube as me, grab it now.  C/P over frame and then move her into position.  Duplicate and move the copy under frame but over paper layer.  SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your magic wand tool and click in the middle of frame.   
SELECTIONS - INVERT, grab the eraser tool now.  Erase the parts of the original tube you don't want.  SELECTIONS - SELECT NONE.(see tag for placement)

Lets do some elements now:
Element 46 - C/P and move to upper left side of tag.  Make sure this layer is UNDER the frame layer and original tube layer.  Duplicate and mirror.
(see tag for placement)
Element 15 - C/P and move to bottom left side of frame.  Make sure this layer is also UNDER the frame layer and original tube layer.  Duplicate and mirror. 
(see tag for placement)
Element 41 - C/P and move to top left corner of tag.  Make sure this and all other layer(s) are OVER the frame layer but under original tube layer.  Duplicate and mirror.
(see tag for placement)
Element 1 - C/P and re-size 50%.  Move to bottom left side of frame.  Make sure this is also under original tube layer.  Duplicate and mirror.
(see tag for placement)
Element 23 - C/P and move to bottom right side of tag over original tube layer.  Duplicate and mirror.
(see tag for placement)
Element 43 - C/P and move to bottom middle of frame over element 23 and copy of element 23 layers.
(see tag for placement)
Element 22 - C/P and re-size 25%.  Move to bottom middle of frame.  Duplicate and move to right side of original and over element 43.
(see tag for placement)
Element 21 - C/P and re-size 30%.  Move to bottom right corner of tag.  Duplicate and mirror.
(see tag for placement)

Element 26 -  C/P and re-size 35%.  Move to top right side just over frame.  Duplicate and mirror.

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial. 

 
Thursday 27 November 2014
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Christmas Cheer

This tutorial was written by me on November 27, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Jessica Dougherty
I bought this tube at Creative Design Outlet  HERE
Do not use this tube unless you have a license.
Scrap Kit: Christmas Cheer - Mini By Creative Crazy Scraps
You can find this kit at Creative Design Outlet  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 6.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  
Duplicate and merge down.  Re-size 115%.
(see tag for placement) 
 
This will be the frame layer:   
Element 17C/P and move it up just a little.  Make sure Element 17 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 10 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 4.  Keep selected.
Now grab the tube you are using.  If you are using the same one as me, grab it now.  C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on OVERLAY.
(see tag for placement)

Now onto some elements: 
Element 13 - C/P and move to upper left corner.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.  Move copy down just a bit.
(see tag for placement)
Element 11 - C/P and move to bottom left side.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).  Duplicate and flip then move a bit to the upper right corner.
(see tag for placement)
Element 7 - C/P and re-size 50%.  Move to top middle of frame.
(see tag for placement)
Element 10 - C/P and re-size 75%.  Move to upper middle of frame over element 7.
(see tag for placement)
Element 1 - C/P and re-size 50%.  Move to bottom right side of frame.
(see tag for placement)   
Element 2 - C/P and re-size 50%.  Move to bottom left side of frame.
(see tag for placement)
 Element 5- C/P and re-size 40%.  Move to bottom left corner of tag.
(see tag for placement)
Element 3 - C/P and re-size 40%.  Move to bottom right corner of tag.
(see tag for placement)

I placed the tube layer(s) here:
Before I placed the tube, I re-sized the whole tag from 800 X 800 to 600 X 600.  Then snagged the tube.  C/P and mirror, then move her into place.
(see tag for placement)
Wordart - C/P and move to bottom middle of tag over tube.
(see tag for placement)
 

Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


Wednesday 26 November 2014
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Snow Queen

This tutorial was written by me on November 26, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Misticheskaya
I bought this tube at Pics For Design  HERE
Do not use this tube unless you have a license.
Scrap Kit: Snow by Daniela E
You can find this kit at Pics For Design  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 4.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  
Duplicate and merge down.  Re-size 115%.
(see tag for placement) 
 
This will be the frame layer:   
Frame 2C/P and re-size 75%.  Move it up near the top and just a little to the left.  Make sure Frame 2 layer is still highlightedGrab your magic wand.  Click in the middle of frame.  SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 1.  Keep selected.
Now grab the tube you are using.  If you are using the same one as me, grab the Close Up now.  C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on LUMINANCE (L).
(see tag for placement)

Now onto some elements: 
Element 16 - C/P and leave it where it lands.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 101 - C/P and move to top right corner of tag.  Make sure this layer is also UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 67 - C/P and re-size 75%.  Move to bottom left corner of tag.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Element 55 - C/P and re-size 55%.  Move to lower right side of frame.
(see tag for placement)
Element 38 - C/P and re-size 50%.  Move to bottom middle of frame and tag.
 (see tag for placement)   
Element 97 - C/P and re-size 40%.  Move to bottom middle of tag in front of element 38.
(see tag for placement)
 Element 11- C/P and re-size 40%.  Move to bottom left side of tag in front of element 67.
(see tag for placement)
Element 103 - C/P and re-size 35%.  Move to bottom left corner of tag in front of element 11
(see tag for placement)
Element 5 - C/P and re-size 40%.  Move t bottom middle of tag in front of element 97.
(see tag for placement)
Element 121 - C/P and re-size 75%.  Move to top right corner of tag.  Duplicate and mirror.  Move just a bit up in the left corner of tag.
(see tag for placement)
I placed the tube layer(s) here:
If you are using the same one as me, grab your chosen version now.  C/P and re-size 50%.  Move to bottom right corner of tag.
(see tag for placement)

Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   


My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me