Search

SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Sunday 31 May 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Bella

This tutorial was written by me on May 31, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Molly Harrison
You can find this tube at Creative Design Outlet  HERE  
Do not use these tubes unless you have a license.
Scrap Kit: ScrapFoxy_WelcometheDay by Foxy's Designz
You can find this kit at Creative Crazy Scraps Store  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 6.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement)  
 
This will be the frame layer:   
Frame 3C/P and re-size 65%.  Move up on tag.  Make sure Frame 3 layer is still highlightedGrab your magic wand.  Click in the middle of frame.    SELECTIONS - MODIFY - EXPAND 10 pixels. 
NEW RASTER LAYER - C/Paste into selection Paper 12.
Keep selected.  Now grab the tube you are using.  If you are going to use the same tube as me, grab her now.  Go to LAYERS - NEW RASTER LAYER - then mirror, then C/P and move her into position on the right side of frame over paper layer. 
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original layer to OVERLAY.  Grab the flower layer that comes with the tube.  Do the same thing with it, but move it over to the left side of frame over the paper.
(see tag for placement)
 
Now onto some elements: 
Element 55 - C/P and move to upper middle of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 17 - C/P and move to left side of tag.  Make sure this layer is also UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 53 - C/P and move to left side of frame. Make sure this layer, and all other layer(s), are OVER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 28 - C/P and re-size to 75%.  Move to bottom middle of frame.
(see tag for placement) 
Element 41 - C/P and re-size to 25%.  Move to bottom of frame and to the left.  Duplicate and mirror.
(see tag for placement)
Element 20 - C/P and re-size to 40%.  Move to upper left side of frame.
(see tag for placement)
  Element 18 - C/and re-size to 75%.  Move to bottom right side of frame on tag.
(see tag for placement) 
Element 30 - C/P and move to bottom left side of frame on tag.
(see tag for placement)
Element 8 - C/P and re-size to 25%.  Free rotate 35º right.  Move to top right side of frame.
(see tag for placement)
Element 42 - C/P and re-size to 50%.  Move to bottom middle of frame just under element 41 and copy of element 41.
(see tag for placement)
Element 52 - C/P and re-size to 25%.  Move to bottom right corner of tag.
(see tag for placement)
Element 3 - C/P and re-size to 50%.  Move to bottom right side of tag, to the left of element 52.
(see tag for placement)
Element 2 - C/P and re-size to 50%.  Move to bottom left side of tag, to the right of element 30.
(see tag for placement)
Element 19 - C/P and re-size to 25%.  Move to top middle of frame. 
(see tag for placement)
Element 27 - C/P and re-size to 25%.  Move to top middle of frame over element 19.
(see tag for placement)
Element 43 - C/P and move to top middle of tag over all layers.
(see tag for placement)
 
I placed the tube layer(s) here: 
If you are still using the same tubes as me, grab it now.  C/P and re-size to 75%.  Move to bottom middle of frame over all other layers.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
 
 
  
Saturday 30 May 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Magical Nights

This tutorial was written by me on May 30, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Zlata_M
You can find this tube at Pics For Design  HERE  
Do not use any tubes unless you have a license.
Scrap Kit: Magical Night by Scrappin With Lil Ole Me
You can find this kit at Mystical Scraps  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 5.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 5 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement)  
 
This will be the frame layer:   
Element 150C/P and re-size to 85%.  Move up and just a tad to the right on tag.  Make sure element 150 layer is still highlightedGrab your magic wand.  Click in the middle of each frame.    SELECTIONS - MODIFY - EXPAND 10 pixels. 
NEW RASTER LAYER - C/Paste into selection Paper 2
SELECTION - SELECT NONE.  
Now grab the tube you are using.  If you are going to use the same tube as me, grab her now.  C/P and re-size to 80%.  Move her into place over paper layer.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original layer to BURN.
(see tag for placement)
 
Now onto some elements: 
Element 37 - C/P and move to upper right side of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 8 - C/P and move it just a bit to the left on tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 124 - C/P and move to bottom right corner of tag. 
Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 161 - C/P and move to bottom left corner of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement) 
Element 136 - C/P and move to bottom left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 49 - C/P and move to lower left side of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).  Duplicate and mirror.  Move copy up just a little bit.
(see tag for placement)
 
I placed the tube layer(s) here: 
If your using the same tubes as I did, C/P and re-size 75%.  Move her to bottom left side of frame.
(see tag for placement)
 
  Element 120 - C/P and re-size 85%.  Move to bottom of tag but just a little bit to the right.
(see tag for placement) 
Element 62 - C/P and re-size 20%.  Move to bottom right side of tag over element 120.  You can erase a little bit of the bottom of this element so it looks like it's sitting in the boat.
(see tag for placement)
  Element 114 - C/P and re-size 25%.  Move to bottom right side of tag over element 120 and to the right of element 62.  You can erase a little bit of this element also so it look like it is sitting in the bottom of the boat.
(see tag for placement)
Element 27 - C/P and re-size 40%.  Move to bottom left side of element 120.  
(see tag for placement)
Element 25 - C/P and re-size 25%.  Move to right side of element 120 so it looks like it's sitting on the top part of boat.
(see tag for placement)
Element 53 - C/P and re-size to 25%.  Move to top left corner of frame.
(see tag for placement)
Element 44 - C/P and re-size to 25%.  Move to top right corner of tag.
(see tag for placement)
Element 43 - C/P and re-size to 30%.  Move to right side of element 120.  Erase part of the handle so it looks like it's hanging over the boat.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
 
 
  
Saturday 23 May 2015
   
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Luna Storm

This tutorial was written by me on May 23, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Alfadesire
I bought this tube and Tiny Turtle Designs  HERE 
Do not use this tube unless you have a license.
Scrap Kit: Luna Storm by Scrappin With Lil Ole Me
You can buy this kit at Tiny Turtle Designs  HERE
MaskWSL 3 HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 1.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.
Duplicate and merge down.

(see tag for placement) 
 
There is no frame layer
Now onto some elements: 
Element 157 - C/P and move up and a bit to the right.
(see tag for placement)
Element 65 - C/P and re-size to 25%.  Move to upper left side of tag.  Change opacity of element to LUMINANCE (L)
(see tag for placement)
Element 31 - C/P and re-size to 20%.  Move to upper right side of tag.
(see tag for placement)
Element 126 - C/P and re-size to 50%.  Move to upper left corner of tag.  Duplicate twice for the count of 3.  Mirror first copy and move to upper middle of tag.  Move the second copy to the far right corner of tag.
(see tag for placement)
Element 91 - C/P and move to upper right side of tag.
(see tag for placement) 
Element 153 - C/P and re-size to 50%.  Move to middle left side of tag.
(see tag for placement)
  Element 84 - C/P and move to lower right side of tag.  Duplicate and mirror.
(see tag for placement)
 
I placed the tube layer(s) here: 
If you are using the same one as me, grab it now.  C/P re-size to 45%.  Move to bottom middle of tag.  All other elements will be placed in front of the tube from here on.
(see tag for placement)
 
  Element 37 - C/P and re-size to 50%.  Move to lower left side of tag.
(see tag for placement)
Element 39 - C/P and re-size to 50%.  Move to lower right side of tag.
(see tag for placement)
Element 60 - C/P and re-size to 30%.  Move to bottom left side of tag over element 37.
(see tag for placement)
 Element 56 - C/P and re-size to 60%.  Move to bottom right side of tag.  Duplicate and mirror.
(see tag for placement)
Element 93 - C/P and re-size to 25%.  Move to bottom middle of tag in front of element 56 and copy of element 56.
(see tag for placement)
Element 72 - C/P and re-size to 15%.  Move to bottom middle of tag over element 56.
(see tag for placement)
 Element 47 - C/P and re-size to 20%.  Move to bottom right side of element 72.
(see tag for placement)
Element 105 - C/P and re-size to 15%.  Move to bottom left side of element 72.
(see tag for placement)
Element 63 - C/P and re-size to 40%.  Move to bottom left side of tag.
(see tag for placement)
Element 79 - C/P and re-size to 40%.  Free Rotate 90º left.  Move to bottom left side of tag in front of element 63.
(see tag for placement)
Element 158 - C/P and move a bit to the left over element 63 and tube.
(see tag for placement)
Element 30 - C/P and re-size to 40%.  Move to bottom right side of tag.
(see tag for placement)
Element 102 - C/P and re-size to 25%.  Move to bottom left side of element 30.
(see tag for placement)
Element 4 - C/P and re-size to 40%.  Move to bottom right side of element 30.
(see tag for placement)
Element 6 - C/P and re-size to 15%.  Free rotate 30º right.  Move to top left side of tag.
(see tag for placement)
Element 149 - C/P and leave it where it lands.
(see tag for placement)
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   

Thursday 21 May 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Sapphire Dreams

This tutorial was written by me on May 21, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Maxine Gadd
You can find this tube at Creative Design Outlet  HERE
Do not use these tubes unless you have a license.
Scrap Kit: Scraphonored_SapphireDreams-mini by Honored Scraps
You can find this kit at Creative Design Outlet  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 1.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement)  
 
This will be the frame layer:   
Frame 3C/P and re-size 65%.  Move up on tag.  Make sure Frame 3 layer is still highlightedGrab your magic wand.  Click in the middle of frame.    SELECTIONS - MODIFY - EXPAND 10 pixels. 
NEW RASTER LAYER - C/Paste into selection Paper 6.
Keep selected.  Now grab the tube you are using.  If you are going to use the same tube as me, grab her now.  Go to LAYERS - NEW RASTER LAYER - then C/Paste the tube into selection.  
SELECTIONS - SELECT NONE.
(see tag for placement)
 
Now onto some elements: 
Element 27 - C/P and move to bottom left corner of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror, then move to upper right corner of tag.
(see tag for placement)
Element 35 - C/P and move to upper middle of tag.  Make sure this layer is also UNDER the frame layer(s).  Now, grab your selection tool.  Create a rectangle around the middle of the frame of the window.  Go to LAYERS - NEW RASTER LAYER and move that layer under element 35.  Then open paper 5.  C/Paste paper 5 into selection.  Keep selected.
(see tag for placement)
Element 19 - Go to LAYERS - NEW RASTER LAYER.  Move new raster layer under element 35 but over paper 5. C/Paste into selection, element 19 over paper 5.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 30 - C/P and move to bottom right side of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror, then move up a bit on tag.
(see tag for placement) 
Element 13 - C/P and re-size 65%.  Move to upper left corner of frame.  Make sure this layer, and all other layer(s), are OVER the frame layer(s).  Duplicate and mirror, then flip and move it so that it looks like one of twinkles in on the lips of the tube.
(see tag for placement)
Element 11 - C/P and re-size 30%.  Move to upper right side of right screen.  Free rotate 30º right.
(see tag for placement)
  Element 10 - C/P and re-size 40%.  Move to upper left side of left screen.  Free rotate 30º left.
(see tag for placement) 
Word Art 2 - C/P and leave in the middle of tag over frame and other layers.  I used a drop shadow on word art to help it stand out.  I used the following settings.
*NOTE* the color I used for this drop shadow is white.  All other drop shadows use black for the color.
(see tag for placement)
Element 26 - C/P and move to bottom left corner of tag.
(see tag for placement)
Element 2 - C/P and re-size 20%.  Move to bottom left side of tag over element 26, like it is sitting on the bench.
(see tag for placement)
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
 
 
Sunday 17 May 2015
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Imperfect Angel

This tutorial was written by me on May 17, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Zindy
You can find this tube at Zindy Zone Shop  HERE  
Do not use any tubes unless you have a license.
Scrap Kit: Purple Poppy by Designs By Stina
You can find this kit at Twilight Scraps  HERE
Mask: WSL 84  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 10.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 10 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  
Duplicate and merge down.  Re-size 115%.
(see tag for placement)  
 
This will be the frame layer:   
Frame 3C/P and move up just a little and the the left just a little on tag.  Make sure Frame 3 layer is still highlightedGrab your magic wand.  Click in the middle of frames.    SELECTIONS - MODIFY - EXPAND 10 pixels. 
NEW RASTER LAYER - C/Paste into selection Paper 9.
SELECTION - SELECT NONE.  
Now grab the first of the tubes you are using.  If you are going to use the same tube as me, grab her now.  C/P the mirrored tube and re-size 50%.  Move her to the left side of frame, over paper layer.  
Next grab Horse 1 element from the kit.  C/P and then move it into position on the right side of the frame.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the horse layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original layer to MULTIPLY.
(see tag for placement)
 
Now onto some elements: 
Deco 1 - C/P and re-size 75%.  Move to right side of frame.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Tree - C/P and re-size 50%.  Move to upper left side of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Poppy Field 1 - C/P and re-size 75%.  Move to lower middle of tag. 
Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Stone Wall - C/P and re-size 75%.  Move to upper middle, but just a bit to the right on tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement) 
Grass 2 - C/P and re-size 30%.  Move to bottom right corner of frame.
Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Grass - C/P and re-size 40%.  Move to bottom left corner of frame.
(see tag for placement)
  Deco 4 - C/P and re-size 75%.  Move to bottom right corner of frame over Grass 2 layer.  Duplicate and mirror.  Make sure it is over the Grass layer.
(see tag for placement) 
Butterfly 1 - C/P and re-size 75%.  Move to upper left corner of frame.
(see tag for placement)
  Remembrance Heart 2 - C/P and re-size 25%. Move to upper right corner of frame.
(see tag for placement)
Purple Heart - C/P and re-size 30%.  Move to bottom middle of frame.
(see tag for placement)
Dove - C/P and re-size 30%.  Move to upper middle of tag over all other layers.
(see tag for placement)
 
I placed the tube layer(s) here: 
If your using the same tubes as I did, C/P and re-size 75%.  Move her to bottom right corner of tag.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
 
 
  

My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me