Showing posts with label Rebel Dezines. Show all posts
Showing posts with label Rebel Dezines. Show all posts
Tuesday, 24 March 2015
Saturday, 22 November 2014
This tutorial was written by me on November 22, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx6 but any version will do.
Artist: Enys Guerrero
You can find this tube at Creative Design Outlet HERE
Scrap Kit: ScrapRD_IB-EnysGuerrero-13-3 By Rebel Dezines
You can buy this kit at Creative Design Outlet HERE
Mask: WSL 84 HERE
Here goes:
New Raster – 800 X 800.
Open Paper 2. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Now for the frame:
Frame 1 - C/P and move a bit down, but keep in the middle of tag. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 5. Keep selected.
If you are using the same tube as me, grab it now. C/P over frame and then move her into position. Duplicate and move the copy under frame but over paper layer. SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
(see tag for placement)
Lets do some elements now:
Element 2 - C/P and move to upper left side of tag. Make sure this layer is UNDER the frame layer and original tube layer. Duplicate and mirror.
(see tag for placement)
Element 12 - C/P and move to bottom left side of frame. Make sure this and all other layer(s) are OVER the frame layer. Duplicate and mirror.
(see tag for placement)
Element 17 - C/P and re-size 60%. Move to bottom left side of tag over element 12.
(see tag for placement)
Element 11 - C/P and re-size 75%. Move to bottom right side of tag over copy of element 12.
(see tag for placement)
Element 20 - C/P and re-size 60%. Move to bottom middle of frame.
(see tag for placement)
Element 22 - C/P and re-size 50%. Move to bottom left side of tag in front of element 17.
(see tag for placement)
Element 1 - C/P and re-size 50%. Move to bottom middle of frame over element 20.
(see tag for placement)
Word Art - C/P and re-size 50%. Move to lower middle of frame over all other layers.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday, 14 September 2014
This tutorial was written by me on September 14, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx6 but any version will do.
Artist: Enys Guerrero
You can find this tube at Creative Design Outlet HERE
Scrap Kit: ScrapRD_IB-EnysGuerrero-12-1 By Rebel Dezines
You can buy this kit at Creative Design Outlet HERE
Mask: WSL 59 HERE
Here goes:
New Raster – 800 X 800.
Open Paper 1. Open mask (WSL 59) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 59 – OK. Duplicate and merge down. Re-size 105%.
Now for the frame:
Frame 1 - C/P and move a bit down, but keep in the middle of tag. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 3. Keep selected.
If you are using the same tube as me, grab it now. C/P over frame and then move her into position. Duplicate and move the copy under frame but over paper layer. SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT - SELECTIONS - SELECT NONE.
Grab your selection tool (same place as magic wand) and create a square around the bottom of original tube layer. Grab the eraser tool now. Erase the parts of tube you don't want. SELECTIONS - SELECT NONE.
(see tag for placement)
Lets do some elements now:
Element 7 - C/P and re-size 60%. Move to top right side of tag. Make sure this layer is UNDER the frame layer and original tube layer.
(see tag for placement)
Element 13 - C/P and move to top left corner of tag. Make sure this layer is UNDER the frame layer and original tube layer.
(see tag for placement)
Element 18 - C/P and re-size 40%. Move this to the bottom left side of frame. Make sure this and all other layer(s) are OVER the frame layer. Move down and out a bit to the left of original. Merge down, then duplicate and mirror.
(see tag for placement)
Element 12 - C/P and re-size 60%. Move to bottom left corner of frame in front of element 18.
(see tag for placement)
Element 1 - C/P and re-size 40%. Move to bottom middle of frame.
(see tag for placement)
Element 19 - C/P and re-size 40%. Move to bottom left corner of frame in front of copy of element 18.
(see tag for placement)
Element 2 - C/P and re-size 40%. Move to upper right corner of frame.
(see tag for placement)
Word Art - C/P and re-size 50%. Move to bottom middle of tag over all layers.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Friday, 23 May 2014
This tutorial was written by me on May 23, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Enys Guerrero
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: ScrapRD_IB-EnysGuerrero-12-3
You can find this kit by Rebel Dezines at the Creative Design Outlet HERE
Mask: WSL 84 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 4. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 7 – OK. Duplicate and merge down. Re-size 115%.
Lets start with these elements:
Element 11 – C/P and leave it where it lands.
Element 19 - C/P and leave it in the middle of element 11.
Make sure element 11 is again highlighted. Grab your magic wand.
Click anywhere outside of element 11.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. Move her into position. Go back to tube and mirror. C/P and move copy into position. Merge down both tubes. Duplicate. Go to ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
Now for some more elements:
Element 13 - C/P and re-size 50%. Move to top right corner of tag.
(see tag for placement)
Element 12 - C/P and leave it where it lands.
(see tag for placement)
Element 7 - C/P and move to far left side of tag. Duplicate and mirror.
(see tag for placement)
Word Art 1 - C/P and re-size 85%. Move down a little bit and to the left side of tag. Now I did a drop shadow as described below except for the color, I used white.
(see tag for placement)
Element 20 - C/P and re-size 50%. Move to bottom left side of tag.
(see tag for placement)
Element 3 - C/P and re-size 30%. Move to bottom left side over element 20.
(see tag for placement)
Element 5 - C/P and re-size 50%. Move to bottom left side of tag, but on the right side of element(s) 20 and 3
(see tag for placement)
Element 1 - C/P and re-size 30%. Move to bottom and a bit to right side of tag.
(see tag for placement)
Element 17 - C/P and re-size 30%. Move to bottom right side of tag.
(see tag for placement)
Element 16 - C/P and re-size 50%. Mirror and move to far right side of tag.
(see tag for placement)
I place the tube layer(s) here:
I did something just a tad different here. The tube is small for the tag, so I re-size it from 800 X 800 to 600 X600. Remember to check RE-SIZE ALL LAYERS. Then I grab the version I like of this tube and paste her in the middle of the tag. Maybe move her down just a bit.
(see tag for placement)
New Raster – 800 X 800.
Open Paper 4. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 4 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 7 – OK. Duplicate and merge down. Re-size 115%.
Lets start with these elements:
Element 11 – C/P and leave it where it lands.
Element 19 - C/P and leave it in the middle of element 11.
Make sure element 11 is again highlighted. Grab your magic wand.
Click anywhere outside of element 11.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. Move her into position. Go back to tube and mirror. C/P and move copy into position. Merge down both tubes. Duplicate. Go to ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on SCREEN.
(see tag for placement)
Now for some more elements:
Element 13 - C/P and re-size 50%. Move to top right corner of tag.
(see tag for placement)
Element 12 - C/P and leave it where it lands.
(see tag for placement)
Element 7 - C/P and move to far left side of tag. Duplicate and mirror.
(see tag for placement)
Word Art 1 - C/P and re-size 85%. Move down a little bit and to the left side of tag. Now I did a drop shadow as described below except for the color, I used white.
(see tag for placement)
Element 20 - C/P and re-size 50%. Move to bottom left side of tag.
(see tag for placement)
Element 3 - C/P and re-size 30%. Move to bottom left side over element 20.
(see tag for placement)
Element 5 - C/P and re-size 50%. Move to bottom left side of tag, but on the right side of element(s) 20 and 3
(see tag for placement)
Element 1 - C/P and re-size 30%. Move to bottom and a bit to right side of tag.
(see tag for placement)
Element 17 - C/P and re-size 30%. Move to bottom right side of tag.
(see tag for placement)
Element 16 - C/P and re-size 50%. Mirror and move to far right side of tag.
(see tag for placement)
I place the tube layer(s) here:
I did something just a tad different here. The tube is small for the tag, so I re-size it from 800 X 800 to 600 X600. Remember to check RE-SIZE ALL LAYERS. Then I grab the version I like of this tube and paste her in the middle of the tag. Maybe move her down just a bit.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Friday, 25 April 2014
Subscribe to:
Posts
(Atom)