Showing posts with label Amy Maries Kits. Show all posts
Showing posts with label Amy Maries Kits. Show all posts
Sunday, 29 September 2013
This tutorial was written by me on September 29, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Ellie Milk
You can find this tube at Pics For Design HERE
This tube was an exclusive and can only be
purchased if you belong to the Exclusive Club and Pics For Design.
Please Don't use this tube without a license.
Scrap Kit: Vanity2 by Amy Marie's Kits HERE
Mask: WSL 84 HERE
Font: Intrique Script Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open PP13. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
I did a second mask layer. Same as above except I used PP1 and I did not duplicate or re-size.
Let’s do the frame layer now:
New Raster – 800 X 800.
Open PP13. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
I did a second mask layer. Same as above except I used PP1 and I did not duplicate or re-size.
Let’s do the frame layer now:
Element 39 – C/P and free rotate 90º right. Move up and left on tag.
Grab your magic wand. Click in the middle of element.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open PP10. Copy and paste into selection. Keep selected.
If you are using the same tube as me, C/P now and re-size 50%.
Grab your magic wand. Click in the middle of element.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open PP10. Copy and paste into selection. Keep selected.
If you are using the same tube as me, C/P now and re-size 50%.
Move it into position. Go to SELECTIONS - INVERT - DELETE -
SELECTIONS - INVERT.
Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to MULTIPLY.
Change OPACITY to 55%.
(see tag for placement)
Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to MULTIPLY.
Change OPACITY to 55%.
(see tag for placement)
Now for some more elements after tube layers:
Element 76 - C/P and mirror. Move to right side of tag.
(see tag for placement)
Element 99 - C/P and re-size 50%. Move to bottom left side of tag.
(see tag for placement)
Element 93 – C/P and move to bottom left side of tag.
(see tag for placement)
Element 98 - C/P and re-size 50%. Mirror and move to bottom left side of tag.
(see tag for placement)
Element 89 - C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Element 12 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 1 - C/P and re-size 50%. Move to bottom left side of tag.
(see tag for placement)
Element 28 - C/P and re-size 20%. Move to bottom left side of tag.
(see tag for placement)
Element 90 - C/P and re-size 20%. Move to bottom left side of tag.
(see tag for placement)
Element 33 - C/P and re-size 25%. Move to bottom left side of tag.
(see tag for placement)
Element 3 - C/P and re-size 20%. Move to bottom left side of tag.
(see tag for placement)
Element 16 - C/P and re-size 50%. Move to bottom middle of tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Saturday, 28 September 2013
This tutorial was written by me on September 28, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Arthur Crowe
You can find this tube at Arthur Crowe's Factory HERE
Please Don't use this tube without a license.
Scrap Kit: Vanity by Amy Marie's Kits HERE
Mask: WSL 84 HERE
Font: Brock Script Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open PP13. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
Let’s do the frame layer now:
New Raster – 800 X 800.
Open PP13. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
Let’s do the frame layer now:
Element 40 - C/P and leave in middle of tag.
Element 41 – C/P and re-size 90%. Grab your magic wand. Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open PP3. Copy and paste into selection. Keep selected.
Grab the version of tube you wish to use and move into place.
SELECTIONS - INVERT. Grab the eraser tool. Erase the bottom part of tube that hangs over frame.
(see tag for placements)
Element 77 – C/P and re-size 75%. Move to top right corner under frame layer. Duplicate and mirror.
(see tag for placement)
Element 14 – C/P and leave in the middle behind tube.
(see tag for placement)
Element 81 – C/P and leave it where it lands.
(see tag for placement)
Element 23 – C/P and re-size 60%. Move to middle right over frame layer. Duplicate and mirror.
(see tag for placement)
Now for some more elements after tube layers:
Element 22 - C/P and re-size 75%. Move to bottom right of frame. Duplicate and mirror.
(see tag for placement)
Element 5 - C/P and re-size 60%. Move to bottom middle of frame.
(see tag for placement)
Element 100 – C/P and re-size 70%. Move to bottom right corner of tag.
(see tag for placement)
Element 101 - C/P and re-size 70%. Move to bottom right corner of tag in front of element 100.
(see tag for placement)
Element 36 - C/P and re-size 50%. Move to bottom right corner in front of element 101.
(see tag for placement)
Element 13 - C/P and re-size 60%. Move to bottom left corner of tag.
(see tag for placement)
Element 18 - C/P and re-size 70%. Move to bottom left corner of tag in front of element 13.
(see tag for placement)
Element 19 - C/P and re-size 40%. Move to bottom left corner of tag in front of element 18.
(see tag for placement)
Element 67 - C/P and re-size 40%. Move to bottom left corner in front of element 19.
(see tag for placement)
Element 86 - C/P and re-size 40%. Move to bottom left corner of tag in front of element 67.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Monday, 23 September 2013
This tutorial was written by me on September 23, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Alehandra Vanhek
You can find this tube at Pics For Design HERE
Please Don't use this tube without a license.
Scrap Kit: Samaelia by Amy Marie's Kits HERE
Mask: WSL 84 HERE
Font: Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open PP17. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP17 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
Gonna do a few elements right now:
Element 39 - C/P and move to upper right side of tag. Duplicate and mirror.
(see tag for placement)
Let’s do the frame layer now:
New Raster – 800 X 800.
Open PP17. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP17 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 110%.
Gonna do a few elements right now:
Element 39 - C/P and move to upper right side of tag. Duplicate and mirror.
(see tag for placement)
Let’s do the frame layer now:
Element 35 – C/P and leave it where it lands
Grab your magic wand. Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open PP11. Copy and paste into selection.
(see tag for placements)
Grab your magic wand. Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open PP11. Copy and paste into selection.
(see tag for placements)
Now for some more elements after frame layers:
Element 32 – C/P and re-size 80%. Move to right side of tag. Duplicate and mirror.
(see tag for placement)
Element 59– C/P and re-size 30%. Move to right side over element 32.
(see tag for placement)
Element 59– C/P and re-size 30%. Move to right side over element 32.
(see tag for placement)
Element 58 – C/P and re-size 30%. Move to left side over copy of element 32.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and move into middle of frame. Make sure it is over element(s) 32, 59, 58. Duplicate your tube and move the copy under element 35. Grab your magic wand. Click in the middle of frame again. SELECTIONS – MODIFY – EXPAND 8 PIXELS - SELECTIONS - INVERT - DELETE - SELECTION NONE. Go back to frame layer. Grab your magic wand and click in the middle of frame again. SELECTION INVERT and go up to your original frame layer and snag your eraser tool. Erase the bottom part of tube that is hanging over frame. SELECTIONS - SELECT NONE.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and move into middle of frame. Make sure it is over element(s) 32, 59, 58. Duplicate your tube and move the copy under element 35. Grab your magic wand. Click in the middle of frame again. SELECTIONS – MODIFY – EXPAND 8 PIXELS - SELECTIONS - INVERT - DELETE - SELECTION NONE. Go back to frame layer. Grab your magic wand and click in the middle of frame again. SELECTION INVERT and go up to your original frame layer and snag your eraser tool. Erase the bottom part of tube that is hanging over frame. SELECTIONS - SELECT NONE.
(see tag for placement)
Element 80 – C/P and move to lower right side over tube layer.
(see tag for placement)
Element 20 - C/P and re-size 60%. Move to bottom and bit to right side of element 35.
(see tag for placement)
Element 33 - C/P and re-size 75%. Move to bottom middle of frame.
(see tag for placement)
(see tag for placement)
Element 20 - C/P and re-size 60%. Move to bottom and bit to right side of element 35.
(see tag for placement)
Element 33 - C/P and re-size 75%. Move to bottom middle of frame.
(see tag for placement)
Element 76 – C/P and move to bottom right side of tag. Duplicate and mirror.
(see tag for placement)
Element 19 - C/P and re-size 50%. Move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 38 - C/P and re-size 50%. Move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 18 - C/P and re-size 30%. Move to bottom middle of tag over middle skull.
(see tag for placement)
Element 8 - C/P and re-size 20%. Move to far left side and move over left most skull.
(see tag for placement)
Element 83 - C/P and re-size 30%. Move to far left over right most skull.
(see tag for placement)
Element 63 - C/P and re-size 50%. Move to bottom middle of left side.
(see tag for placement)
Element 28 - C/P and re-size 50%. Move to very bottom middle of tag.
(see tag for placement)
Element 16 - C/P and re-size 35%. Move to right side of element 28.
(see tag for placement)
Element 17 - C/P and re-size 30%. Move to left side of element 16.
(see tag for placement)
(see tag for placement)
Element 19 - C/P and re-size 50%. Move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 38 - C/P and re-size 50%. Move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 18 - C/P and re-size 30%. Move to bottom middle of tag over middle skull.
(see tag for placement)
Element 8 - C/P and re-size 20%. Move to far left side and move over left most skull.
(see tag for placement)
Element 83 - C/P and re-size 30%. Move to far left over right most skull.
(see tag for placement)
Element 63 - C/P and re-size 50%. Move to bottom middle of left side.
(see tag for placement)
Element 28 - C/P and re-size 50%. Move to very bottom middle of tag.
(see tag for placement)
Element 16 - C/P and re-size 35%. Move to right side of element 28.
(see tag for placement)
Element 17 - C/P and re-size 30%. Move to left side of element 16.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday, 22 September 2013
This tutorial was written by me on September 22, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Misticheskaya
You can find this tube at Pics For Design HERE
Please Don't use this tube without a license.
Scrap Kit: Halloween Spook by Amy Marie's Kits HERE
Mask: WSL 84 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open PP13. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 120%.
Gonna do a few elements right now:
Element 15 - C/P and mirror and move to the right side of tag.
(see tag for placement)
Element 13 - C/P and re-size 40%. Move to top right side of tag.
(see tag for placement)
Let’s do the frame layer now:
New Raster – 800 X 800.
Open PP13. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 120%.
Gonna do a few elements right now:
Element 15 - C/P and mirror and move to the right side of tag.
(see tag for placement)
Element 13 - C/P and re-size 40%. Move to top right side of tag.
(see tag for placement)
Let’s do the frame layer now:
Element 20 – C/P and re-size 80%. Free rotate 20º left.
Move up and to the left just a little.
Grab your magic wand. Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open PP1. Copy and paste into selection. Keep selected.
If you are using the same tube(s) as me, grab the version you want. Mirror then C/P and re-size 80%. Move it into position.
Go to SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.
(see tag for placements)
Move up and to the left just a little.
Grab your magic wand. Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open PP1. Copy and paste into selection. Keep selected.
If you are using the same tube(s) as me, grab the version you want. Mirror then C/P and re-size 80%. Move it into position.
Go to SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.
(see tag for placements)
Now for some more elements after frame layers:
Element 37 – C/P and move to the lower right side. Duplicate and mirror.
(see tag for placement)
Element 33– C/P and move to right side in front of element 15.
(see tag for placement)
Element 33– C/P and move to right side in front of element 15.
(see tag for placement)
Element 16 – C/P and re-size 40%. Move to right side. Make it look like it's hanging over tree limb.
(see tag for placement)
Element 71 – C/P and re-size 50%. Move to bottom front of element 20 and element 37.
(see tag for placement)
Element 62 - C/P and re-size 60%. Move to bottom left corner of element 20.
(see tag for placement)
Element 74 - C/P and re-size 60%. Move to bottom middle of tag.
(see tag for placement)
(see tag for placement)
Element 62 - C/P and re-size 60%. Move to bottom left corner of element 20.
(see tag for placement)
Element 74 - C/P and re-size 60%. Move to bottom middle of tag.
(see tag for placement)
Element 67 – C/P and move to the bottom left side of tag.
(see tag for placement)
Element 44 - C/P and re-size 80%. Move to the bottom left corner of tag.
(see tag for placement)
Element 49 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 28 - C/P and re-size 80%. Move to top left side of tag.
(see tag for placement)
Element 69 - C/P and move to top middle of tag.
(see tag for placement)
I place the tube layer here:
If you are using the same tube(s) as me, grab the version you like now. C/P and re-size 75%. Move to right side of tag. Open Element 7. C/P and move it over the full tube.
(see tag for placement)
(see tag for placement)
Element 44 - C/P and re-size 80%. Move to the bottom left corner of tag.
(see tag for placement)
Element 49 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 28 - C/P and re-size 80%. Move to top left side of tag.
(see tag for placement)
Element 69 - C/P and move to top middle of tag.
(see tag for placement)
I place the tube layer here:
If you are using the same tube(s) as me, grab the version you like now. C/P and re-size 75%. Move to right side of tag. Open Element 7. C/P and move it over the full tube.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Saturday, 21 September 2013
This tutorial was written by me on September 21, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Alicia Mujica
You can find this tube at La Boutique De Luna HERE
Please Don't use this tube without a license.
Scrap Kit: Bree by Amy Marie's Kits
You can find this Exclusive kit HERE
Mask: WSL 84 HERE
Font: Xtreem Fat Demo Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open PP23. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP23 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 120%.
Gonna do a few elements right now:
Element 49 - C/P and move to lower left side of tag.
(see tag for placement)
Element 39 - C/P and move to right side of tag and a little bit up.
(see tag for placement)
Element 57 - C/P and move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Let’s do the frame layer now:
New Raster – 800 X 800.
Open PP23. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP23 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 120%.
Gonna do a few elements right now:
Element 49 - C/P and move to lower left side of tag.
(see tag for placement)
Element 39 - C/P and move to right side of tag and a little bit up.
(see tag for placement)
Element 57 - C/P and move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Let’s do the frame layer now:
Element 62 – C/P and move up and to the left just a little.
Grab your magic wand. Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open PP4. Copy and paste into selection. SELECTIONS - SELECT NONE.
(see tag for placements)
Element 2 - C/P and move to bottom right corner of element 62 (frame).
(see tag for placement)
Element 27 - C/P and move to top left corner of element 62.
(see tag for placement)
Element 68 - C/P and re-size 75%. Move to bottom left side of element 62.
(see tag for placement)
Element 9 - C/P and move to bottom left side in front of element 68 and 62.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab the full version. C/P and move to bottom of element 62 (frame) so it looks like she is sitting on the bottom of it.
(see tag for placement)
And yet more elements after tube:
Element 37 - C/P and move to bottom right corner of tag.
(see tag for placement)
Element 34 – C/P and re-size 50%. Move to right side over bottom left side of element 37.
Grab your magic wand. Click in the middle of element. SELECTIONS – MODIFY – EXPAND 8 PIXELS. New Raster Layer. Move under frame layer. Open PP4. Copy and paste into selection. SELECTIONS - SELECT NONE.
(see tag for placements)
Now for some more elements after frame layers:
Element 2 - C/P and move to bottom right corner of element 62 (frame).
(see tag for placement)
Element 27 - C/P and move to top left corner of element 62.
(see tag for placement)
Element 68 - C/P and re-size 75%. Move to bottom left side of element 62.
(see tag for placement)
Element 9 - C/P and move to bottom left side in front of element 68 and 62.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab the full version. C/P and move to bottom of element 62 (frame) so it looks like she is sitting on the bottom of it.
(see tag for placement)
And yet more elements after tube:
Element 37 - C/P and move to bottom right corner of tag.
(see tag for placement)
Element 34 – C/P and re-size 50%. Move to right side over bottom left side of element 37.
(see tag for placement)
Element 16– C/P and mirror. Move to bottom left corner of tag.
Element 16– C/P and mirror. Move to bottom left corner of tag.
(see tag for placement)
Element 78 – C/P and re-size 40%. Move over element 16 like he is sitting on the element.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)