Thursday 24 October 2013
PTU Under Arrest
This tutorial was written by me on October 24, 2013.
Artist: Tony Tzanoukakis
Here goes:
The Template first:
Open template in PSP. Hold down
SHIFT button and tap your “D” key. Close
the original template. Delete the “Credits”
layer with her CR info.
I don't like a white background unless I really need one, so I clear the
white background by highlighting the Raster 1layer and go to
EDIT - CLEAR.
EDIT - CLEAR.
Next
I changed the canvas size to 800 X 800. We are gonna do basically the
same thing for the following layers, so in an effort to stop repeating
myself, here is what you will do for each layer that we change out:
Highlight layer. SELECTIONS - SELECT ALL - FLOAT - DE FLOAT
Open Paper(s) - C/P - SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT
NONE
Delete layer.
So it will go something like this:
You
will be changing these layers: 1,2,3,5, and 7. We will not delete any layers. We will toggle all
the layers by layer link toggle - toggle1 for layers 1,2,3,4, 5 and 6 and tube layers and toggle 2 for 7 and 8 and other tube layers.
Highlight 1. Using directions above. Use Paper 6. Rename it Paper 6 - 1.
Highlight 2. Same as above. Use Paper 10. Rename Paper 10 - 2.
Highlight 3. Same as above. Use Paper 8. Rename Paper 8 - 3.
Highlight 4. Same as above. Use Paper 7. Rename Paper 7 - 5.
Highlight 5. Same as above. Use Paper 4. Rename Paper 4 - 7.
(see tag for placement)
Highlight 2. Same as above. Use Paper 10. Rename Paper 10 - 2.
Highlight 3. Same as above. Use Paper 8. Rename Paper 8 - 3.
Highlight 4. Same as above. Use Paper 7. Rename Paper 7 - 5.
Highlight 5. Same as above. Use Paper 4. Rename Paper 4 - 7.
(see tag for placement)
We are gonna use our tube now:
Open tube, C/P and re-size 40%. Move over Paper 7 - 5 and then duplicate tube.
Highlight the Paper 7 - 5 and go to SELECTIONS - SELECT ALL - FLOAT - DE-FLOAT - SELECTIONS - INVERT, Highlight tube layer, then hit DELETE. Duplicate tube layer. On the copy of tube layer:
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Open tube, C/P and re-size 40%. Move over Paper 7 - 5 and then duplicate tube.
Highlight the Paper 7 - 5 and go to SELECTIONS - SELECT ALL - FLOAT - DE-FLOAT - SELECTIONS - INVERT, Highlight tube layer, then hit DELETE. Duplicate tube layer. On the copy of tube layer:
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original
tube layer and change BLEND MODE to SCREEN.
Do the same for Paper 4 - 7, except mirror the tube.
Do the same for Paper 4 - 7, except mirror the tube.
(see tag for placement)
Now for more elements:
Element 11 - C/P move to the right side of tag.
(see tag for placement)
Element 13 - C/P and re-size 50%. Free rotate this layer 22º left. Move to left side of tag.
(see tag for placement)
Element 5 - C/P and move to right side of tag.
(see tag for placement)
Element 12 - C/P and re-size 40%. Free rotate 22º right. Move to left side of tag over element 13.
(see tag for placement)
Element 30 - C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Element 2 - C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Element 1 - C/P and re-size 40%. Move to top left corner of tag.
(see tag for placement)
Element 15 - C/P and re-size 40%. Move to middle but bit left on tag.
(see tag for placement)
Element 9 - C/P and re-size 40%. Move to top left side of tag.
(see tag for placement)
Element 27 - C/P and re-size 70%. Move to bottom right side of tag.
(see tag for placement)
Now for the tube:
If you are using the same tube as me, C/P and re-size by 40%. Mirror and move tube layer under element 27 layer. Make sure they are moved over to the right side of tag.
Now for the mask layer:
Now for more elements:
Element 11 - C/P move to the right side of tag.
(see tag for placement)
Element 13 - C/P and re-size 50%. Free rotate this layer 22º left. Move to left side of tag.
(see tag for placement)
Element 5 - C/P and move to right side of tag.
(see tag for placement)
Element 12 - C/P and re-size 40%. Free rotate 22º right. Move to left side of tag over element 13.
(see tag for placement)
Element 30 - C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Element 2 - C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Element 1 - C/P and re-size 40%. Move to top left corner of tag.
(see tag for placement)
Element 15 - C/P and re-size 40%. Move to middle but bit left on tag.
(see tag for placement)
Element 9 - C/P and re-size 40%. Move to top left side of tag.
(see tag for placement)
Element 27 - C/P and re-size 70%. Move to bottom right side of tag.
(see tag for placement)
Now for the tube:
If you are using the same tube as me, C/P and re-size by 40%. Mirror and move tube layer under element 27 layer. Make sure they are moved over to the right side of tag.
Now for the mask layer:
Open Paper 9 and WSL 116, then minimize.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and paste Paper 9 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL 116 from the drop down menu – OK. Duplicate and merge down. Re-size 105%.
Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
Subscribe to:
Post Comments
(Atom)
0 comments:
Post a Comment