Search
SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Wednesday, 30 October 2013

PTU Isa

4:00:00 pm | Posted by | Edit Post
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Isa
 
This tutorial was written by me on October 30, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: The Hunter
You can find this tube at Scraps And The City  HERE
Please Don't use this tube without a license.
Scrap Kit: Isa by Designs By Joan  HERE
Font:  Font  HERE

Here goes:

 Lets do some more elements:
Element 74 - C/P and move to top left corner of tag.  Duplicate and mirror.
(see tag for placement)
Element 7 - C/P and move to bottom left side of tag.  Duplicate and mirror.
(see tag for placement)
Element 34 - C/P and move to top right corner of tag.  Duplicate and mirror.
(see tag for placement)
Element 33 - C/P and move over to right side of tag.  Duplicate and mirror.
(see tag for placement)
Element 8 - C/P and move to top middle part of tag.
(see tag for placement)

Now for the frame:
Element 68 - C/P and leave in middle of tag.  Grab your magic wand.  Click in the middle of the frame.   
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.   
C/Paste into selection Paper 3.  Keep selected.  
Now grab the tube you are using.  If you are using the same one as me, C/P and move her into position.
 SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.  ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.  Change BLEND MODE of copy of tube layer to HARD LIGHT and change original tube layer to OVERLAY.
(see tag for placement)

More Elements now:
Element 66 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 76 - C/P and re-size 80%.  Move to bottom right side of tag.  Duplicate and mirror.
(see tag for placement)
Element 80 - C/P and re-size 40%.  Move to bottom left side of tag
(see tag for placement)
Element 65 - C/P and re-size 30%.  Move to bottom left side, but to the right of element 80.
(see tag for placement)
Element 47 - C/P and move to bottom left corner of tag.
(see tag for placement) 

Now for the mask layer:
Open Paper 2 and WSL 84, then minimize. 
Highlight very bottom layer.  SELECTIONS - SELECT ALL
Copy and paste Paper 2 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED – CHOOSE WSL 84 from the drop down menu – OK.  Duplicate and merge down.  Re-size 115%. 

Now for the tube(s):
If you are using the same tube as me, C/P the full size tube.  Mirror and re-size 50%.  Move to bottom right side of tag.
(see tag for placement) 

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
Labels:,,,,, | 0 comments
Tuesday, 29 October 2013

PTU Old School

10:19:00 am | Posted by | Edit Post
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Old School
 
This tutorial was written by me on October 29, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Arthur Crowe
You can find this tube at Arthur Crowe's Factory  HERE
Please Don't use this tube without a license.
Scrap Kit: Old School by Wicked Creationz Scraps  HERE
Font: Smitten Kitten Font  HERE

Here goes:

Now for the mask layer:
Open PP 10 and WSL 84, then minimize. 
Highlight very bottom layer.  SELECTIONS - SELECT ALL
Copy and paste PP 10 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED – CHOOSE WSL 84 from the drop down menu – OK.  Duplicate and merge down.  Re-size 115%.

 Now for the frame:
Element 30 - C/P and re-size 70%.  Move to upper middle of tag.  Grab your magic wand.  Click in the middle of the frame layer.   
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.   
C/Paste into selection PP7.  Keep selected.  
Now grab the tube you are using.  I used the medium CU.  Re-size if needed.  Grab it up now.  C/P and move her into position.
 SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.  ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.  Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original layer to SCREEN.
Element 29 - C/P and re-size 70%.  Move to left middle of tag.  Duplicate and mirror.  Grab your magic wand.  Click in the middle of the frame layer. 
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.   
C/Paste into selection PP7.  Do the same for Copy of 29.  
(see tag for placement)

 Lets do some more elements now:
Element 24 - C/P and re-size 60%.  Move over element 29 and PP 8 layers.
(see tag for placement)
Element 22 - C/P and re-size 60%.  Move over copy of element 29 and PP8.
(see tag for placement)
Element 6 - C/P and re-size 70%.  Move to top right corner of tag.  Duplicate and mirror.
(see tag for placement)
Element 27 - C/P and re-size 50%.  Move to bottom middle between element 29 and copy of element 29.
(see tag for placement)
Element 10 - C/P and re-size 70%.  Move to bottom right corner of tag.
(see tag for placement)
Element 21 - C/P and re-size 50%.  Move to bottom right corner of tag in front of element 10.
(see tag for placement)
Element 23 - C/P and re-size 70%.  Move to bottom left corner of tag.
(see tag for placement)

 Now for the tube(s):
If you are using the same tube as me, C/P the full size tube.  Mirror an re-size 60%.  Move to bottom left side of tag.
(see tag for placement)

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
Labels:,,,, | 0 comments
Saturday, 26 October 2013

PTU 2013 Skirt Attitude

10:47:00 am | Posted by | Edit Post
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU 2013 Skirt Attitude

This tutorial was written by me on October 26, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.

Artist: Ismael Rac
You can find this tube at XeracX Store  HERE 
Please Don't use this tube without a license.
Scrap Kit: Skirt Attitude by Crystal's Creations  HERE 
Mask: WSL 84  HERE 
Font:   Font  HERE
  
Here goes:

Let’s start with the mask layer:
New Raster – 800 X 800.
Open PP10.  Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste PP10 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.  Duplicate and merge down.  Re-size 115%.
Now for some elements:

Element 29 – C/P and move to the top left side of tag.  Duplicate and mirror.
(see tag for placement)
Element 18 – C/P and move to top left corner of tag.  Duplicate and mirror.
(see tag for placement)
Element 9 – C/P and move to middle left of tag.  Duplicate and mirror.
(see tag for placement)
Element 5 – C/P and move to top middle of tag.  Duplicate and flip.
(see tag for placement)
Element 3 – C/P and move to middle right side of tag.
(see tag for placement)
Element 15 – C/P and move to bottom left side of tag.
(see tag for placement)
Element 14 – C/P and move to bottom middle, but a bit left of tag.
(see tag for placement)
Element 13- C/P and move to bottom middle in front of element 14.

(see tag for placement)
Element 11 - C/P and re-size 80%.  Move to bottom middle of tag in front of element 13.
(see tag for placement) 
 Element 25 - C/P and move to bottom left corner of tag in front of all other elements.
(see tag for placement)
Element 19 - C/P and re-size 40%.  Move to bottom right corner of tag.
(see tag for placement)

 
I'll place the tube layer now: 
If you are using the same tube as me, grab your favorite version now.  C/P mirror and re-size 50%.  Move this layer over to the right side of the tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
Labels:,,,, | 0 comments
Thursday, 24 October 2013

PTU Autumn Girl

8:42:00 pm | Posted by | Edit Post
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size* 
 
 PTU Autumn Girl
 
This tutorial was written by me on October 24, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do. 

Artist: Verymany
You can find this tube at Scraps And The City  HERE
Please Don't use this tube without a license.
Scrap Kit: Autumn Music by Bibi's Collection  HERE
Font: Serendipity Font  HERE

Here goes:

Now for the mask layer:
Open Paper 1 and WSL 84, then minimize. 
Highlight very bottom layer.  SELECTIONS - SELECT ALL
Copy and paste Paper 1 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED – CHOOSE WSL 84 from the drop down menu – OK.  Duplicate and merge down.  Re-size 115%.

 Now for the frame:
Element 70 - C/P and move to upper left side.  Grab your magic wand.  Click in the middle of the frame layer.   
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.   
C/Paste into selection Paper 8.  Keep selected.  
Now grab the tube you are using.  If you are using the same one as me, grab the close up now.  C/P and move her into position.
 SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.  ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.  Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original layer to SCREEN.
(see tag for placement)

 Lets do some more elements now:
Element 25 - C/P and move this layer under the frame and tube layers.  Then move to the bottom left, then flip. 
(see tag for placement)
Element 44 - C/P and move this layer under the frame and tube layers but above element 25 layer.  Then move it to bottom of tag.
(see tag for placement)
Element 28 - C/P and re-size 50%.  Move to bottom over frame and tube layers.  Place it on the bottom of frame.
(see tag for placement)
Element 26 - C/P and move to the upper right side of tag.
(see tag for placement)
Element 11 - C/P and re-size 70%.  Move to top right corner over frame.
(see tag for placement)
Element 42 - C/P and re-size 80%.  Move to bottom left corner of tag.
(see tag for placement)
Element 6 - C/P and re-size 40%.  Move to bottom left corner of tag in front of element 42.
(see tag for placement)
Element 7- C/P and re-size 50%.  Move to bottom left corner of tag to the right side of element 6.
(see tag for placement)

 Now for the tube(s):
If you are using the same tube as me, C/P the full size tube.  Re-size 80%.  Move to bottom right side of tag.
(see tag for placement)

Add drop shadow to layers of your choosing.
I used: 
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.

I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 
Labels:,,,, | 0 comments

PTU Under Arrest

9:44:00 am | Posted by | Edit Post
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*
 
PTU Under Arrest
 
This tutorial was written by me on October 24, 2013. 
It was made out of my own creation and any similarity is purely coincidental. I used PSPx2 but any version would work.

Artist: Tony Tzanoukakis  
You can find his tubes at The Art Of Tony T Store  HERE 
Do not use this tube unless you have a license. 
Scrap Kit: Under Arrest by Rissa's Designs 
You can find this kit at The Art Of Tony T Store  HERE
Mask: WSL 116  HERE 
Template: Template 178 by Horseplay Pasture  HERE 
Font: Badaboom BB Font  HERE 

Here goes:
 
The Template first:
Open template in PSP.  Hold down SHIFT button and tap your “D” key.  Close the original template.  Delete the “Credits” layer with her CR info.
I don't like a white background unless I really need one, so I clear the white background by highlighting the Raster 1layer and go to 
EDIT - CLEAR.
Next I changed the canvas size to 800 X 800.  We are gonna do basically the same thing for the following layers, so in an effort to stop repeating myself, here is what you will do for each layer that we change out:
Highlight layer.  SELECTIONS - SELECT ALL - FLOAT - DE FLOAT
Open Paper(s) - C/P - SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE
Delete layer. 
  
So it will go something like this:
You will be changing these layers: 1,2,3,5, and 7.  We will not delete any layers.  We will toggle all the layers by layer link toggle - toggle1 for layers 1,2,3,4, 5 and 6 and tube layers and toggle 2 for 7 and 8 and other tube layers.
 
Highlight 1.  Using directions above.  Use Paper 6.  Rename it Paper 6 - 1. 
Highlight 2.  Same as above.  Use Paper 10.  Rename Paper 10 - 2. 
Highlight 3.  Same as above.  Use Paper 8.  Rename Paper 8 - 3.
Highlight 4.  Same as above.  Use Paper 7.  Rename Paper 7 - 5.
Highlight 5.  Same as above.  Use Paper 4.  Rename Paper 4 - 7.
(see tag for placement)
We are gonna use our tube now:
Open tube, C/P and re-size 40%.  Move over Paper 7 - 5 and then duplicate tube.  
Highlight the Paper 7 - 5 and go to SELECTIONS - SELECT ALL - FLOAT - DE-FLOAT - SELECTIONS - INVERT, Highlight tube layer, then hit DELETE.  Duplicate tube layer.  On the copy of tube layer:
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to SCREEN.
Do the same for Paper 4 - 7, except mirror the tube. 
(see tag for placement)

 Now for more elements: 
Element 11 - C/P move to the right side of tag.
(see tag for placement)
Element 13 - C/P and re-size 50%.  Free rotate this layer 22º left.  Move to left side of tag.
(see tag for placement)
Element 5 - C/P and move to right side of tag.
(see tag for placement)
Element 12 - C/P and re-size 40%. Free rotate 22º right.  Move to left side of tag over element 13.
(see tag for placement)
Element 30  - C/P and re-size 40%.  Move to bottom left side of tag.
(see tag for placement)
Element 2 - C/P and re-size 40%.  Move to bottom left side of tag.
(see tag for placement)
Element 1 - C/P and re-size 40%.  Move to top left corner of tag.
(see tag for placement)
Element 15 - C/P and re-size 40%.  Move to middle but bit left on tag.
(see tag for placement)
Element 9 - C/P and re-size 40%.  Move to top left side of tag.
(see tag for placement)
Element 27 - C/P and re-size 70%.  Move to bottom right side of tag. 
(see tag for placement)  

Now for the tube:
If you are using the same tube as me, C/P and re-size by 40%.  Mirror and move tube layer under element 27 layer.  Make sure they are moved over to the right side of tag.

Now for the mask layer:
Open Paper 9 and WSL 116, then minimize. 
Highlight very bottom layer.  SELECTIONS - SELECT ALL
Copy and paste Paper 9 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED – CHOOSE WSL 116 from the drop down menu – OK.  Duplicate and merge down.  Re-size 105%.

 Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
 
 

Labels:,,,, | 0 comments
Monday, 21 October 2013

PTU Andriana

12:42:00 pm | Posted by | Edit Post
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*
 
PTU Andriana
 
This tutorial was written by me on October 21, 2013. It was made out of my own creation and any similarity is purely coincidental. I used PSPx2 but any version would work.

Artist: Roman Zaric  
You can find his tubes at Roman Zaric Tube Store  HERE  
Do not use this tube unless you have a license.   
Scrap Kit: Andriana by Desirena Designs
You can find this kit at Roman Zaric Tube Store  HERE   
Mask: WSL 84  HERE   
Template: Template 383 by Millie's PSP Madness  HERE   
Font: Affair 1 Font  HERE 

Here goes:
 
The Template first:
Open template in PSP.  Hold down SHIFT button and tap your “D” key.  Close the original template.  Delete the “Credits” layer with her CR info.
I don't like a white background unless I really need one, so I clear the white background by highlighting the Raster 1layer and go to 
EDIT - CLEAR.
Next I changed the canvas size to 800 X 800.  I also toggle all layers so that if I feel the need to move them on such a big canvas, I don't mess up the layering.  You can do that by clicking on the LAYER LINK TOGGLE. 

We are gonna do basically the same thing for the following layers, so in an effort to stop repeating myself, here is what you will do for each layer that we change out:
Highlight layer.  SELECTIONS - SELECT ALL - FLOAT - DE FLOAT
Open Paper(s) - C/P - SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE
Delete layer. 
  
So it will go something like this:
You will be changing these layers: 1, 2, 3, 4, 6, 7, 8 and 9.  We will delete 5 and leave 8 and 9 as is.  We will leave 1, 2, 3 and 4 pretty much where it is but have them as toggle 1 and toggle 2 for layers 6 and 8 and toggle 3 for 7 and 9.
 
Highlight 1.  Using directions above.  Use P12.  Rename it P12 - 1. 
Highlight 2.  Same as above.  Use P3.  Rename P3 - 2. 
Highlight 3.  Same as above.  Use P8.  Rename P8 - 3.
Highlight 4.  Same as above.  Use P1.  Rename P1 - 5.
(see tag for placement)
 I used HUE/SATURATION/LIGHTNESS for layers 6 and 7, using the following setting:

 
We are gonna use our tube now:
Open tube, choose your favorite version.  C/P and re-size 45%.  Move over layer 6.  
Highlight the layer 6 and go to SELECTIONS - SELECT ALL - FLOAT - DE-FLOAT - INVERT, Highlight tube layer, then hit DELETE.  Duplicate tube layer.  On the original tube layer:
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to copy of tube layer and change BLEND MODE to SCREEN.
 Do the same for layer 7 but mirror the tube before you delete anything.
Don't forget to toggle the tube layers in case you want to move them all.  
(see tag for placement)

 Now for more elements: 
Element 18 - C/P and move this layer under layer 6.  You can leave this element in middle but move up just a tad.
(see tag for placement)
Element 3 - C/P and re-size 50%.  Move to top right side of tag but on left side of layer 7.  Duplicate and move a bit right and down to right side of layer 6.
(see tag for placement)
Element 26 - C/P and move to upper left side of tag.
(see tag for placement)
Element 11 - C/P and re-size 60%.  Mirror and move to bottom right side of tag.
(see tag for placement)
Element 9 - C/P and re-size 40%.  Move to bottom right side over element 11.
(see tag for placement)
Element 13 - C/P and re-size 35%.  Move to bottom right side in front of element 11 and 9.  Duplicate and move a bit left.
(see tag for placement)
Element 17 - C/P and move to upper left side of tag.
(see tag for placement)
Element 12 - C/P and re-size 75%.  Move to top middle of tag.
(see tag for placement)

 Now for the tube:
If you are using the same tube as me, C/P the version your choosing to use.  Re-size by 45%.  Mirror and move tube to bottom left side of tag.

Now for the mask layer:
Open P10 and WSL 84, then minimize. 
Highlight very bottom layer.  SELECTIONS - SELECT ALL
Copy and paste P10 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED – CHOOSE WSL 84 from the drop down menu – OK.  Duplicate and merge down.  Re-size 120%.

 Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
   

Labels:,,, | 0 comments
Subscribe to: Posts (Atom)

My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me