Thursday, 30 January 2014
This tutorial was written by me on January 30, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Camilla Drakenborg
You can find this tube at Up Your Art HERE
Please Don't use this tube without a license.
Scrap Kit: Temptation by JT's Designs
You can buy this kit at Scraps From The Heart HERE
Here goes:
New Raster – 800 X 800.
Open Paper 15. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 15 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Now for the frame:
Frame 1 - C/P and re-size 75%. Make sure your frame layer is highlighted. Grab your FREEHAND SELECTION (the lasso) TOOL. Start tracing around the inside of the frame. Once you have the whole inside of the frame selected,
go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
Add a new raster layer. C/Paste into selection Paper 12.
Grab your FREEHAND SELECTION (the lasso) TOOL again. Trace around the inside of the frame again.
Go to SELECTIONS - INVERT.
Now grab the tube you are using. If you are using the same one as me, grab it now. C/P over the frame and move her into position. Duplicate and move the copy layer under frame layer.
Hit your delete button. Grab your eraser tool. Highlight your original tube layer. Erase parts of tube you don't want.
SELECTIONS - SELECT NONE.
(see tag for placement)
Lets do some elements now:
Moon 1 - C/P and re-size 50%. Move to top left corner of tag. Make sure this layer is UNDER the frame layer.
(see tag for placement)
Tree - C/P and re-size 80%. Move to left side of tag. Duplicate and mirror.
(see tag for placement)
Lamp - C/P and move to right side of tag. Duplicate and mirror.
(see tag for placement)
Butterfly Gem2 - C/P and re-size 70%. Move to bottom middle of frame.
(see tag for placement)
Bench1 - C/P and re-size 30%. Move to bottom right corner of tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday, 26 January 2014
This tutorial was written by me on January 26, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Gaetano Di Falco
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: Butterfly Fire by Devilish Dezines
This kit is exclusive Scraps & Co. and can be found HERE
Mask: WSL 84 HERE
Here goes:
New Raster – 800 X 800.
Open Paper 5. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 5 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Lets do some elements now:
Element 28 - C/P and leave it where it lands, over the mask layer.
(see tag for placement)
Element 32 - C/P and leave it where it lands over element 28 layer.
(see tag for placement)
Element 22 - C/P and move to bottom middle of tag. Duplicate and mirror then flip.
(see tag for placement)
Element 43 - C/P and re-size 80%. Move to left side of tag. Duplicate and mirror.
(see tag for placement)
Element 9 - C/P and re-size 50%. Move to top left side of element 43. Duplicate and mirror.
(see tag for placement)
Element 17 - C/P and re-size 84%. Move to far left side of element 43. Duplicate and mirror.
(see tag for placement)
Element 8 - C/P and re-size 50%. Move to bottom left side of tag. Duplicate and mirror.
(see tag for placement)
Element 3 - C/P and move to bottom left side of tag. Duplicate and mirror.
(see tag for placement)
Element 10 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 6 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 20 - C/P and move to bottom left side of tag. Duplicate, mirror and move to upper right corner of tag.
(see tag for placement)
Element 49 - C/P and re-size 30%. Move to middle right side of tag.
(see tag for placement)
Now for the tube(s):
If you are using the same tags as I, grab it now. C/P and move to the bottom and a bit to the left side of tag.
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Save and add
name and © info.
Let me know what you think of
this tutorial.
I would love to see any results.
Monday, 20 January 2014
This tutorial was written by me on January 20, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: PinUp Toons
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: IB Scrap Kit PinUp Toons Individual Tube 162-2
You can find this kit at Creative Design Outlet HERE
Mask: WSL 116 HERE
Here goes:
New Raster – 800 X 800.
Open Paper 1. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
Now for the frame:
Frame 1 - C/P and move it up a little on tag.
Make sure Frame 1 is the highlighted layer. Grab your magic wand. Click in the middle of the frame layer.
Go to SELECTIONS - MODIFY - EXPAND 16 PIXELS - INVERT.
Open New Raster Layer. C/Paste into selection Paper 4.
Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab the CU now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to MULTIPLY.
(see tag for placement)
Lets do some elements now:
Element 7 - C/P and move to bottom right side of tag. Duplicate and mirror. Make sure these layers are UNDER the frame layers.
(see tag for placement)
Element 13 - C/P and re-size 50%. Move to bottom left corner of frame. Duplicate and mirror. Make sure this layer is OVER the frame layer.
(see tag for placement)
Element 14 - C/P and re-size 80%. Move to bottom middle of frame.
(see tag for placement)
Element 8 - C/P and re-size 40%. Move to middle of element 14.
(see tag for placement)
Element 3 - C/P and re-size 60%. Move to top right corner of frame. Duplicate and mirror.
(see tag for placement)
Element 2 - C/P and re-size 50%. Move to bottom middle of tag in front of element 8.
(see tag for placement)
Element 18 - C/P and and re-size 50%. Move to bottom left side of tag. Duplicate and mirror. Move the copy a bit to the left of tag.
(see tag for placement)
Wordart - C/P and re-size 70%. Move to bottom part of frame but a little left on tag.
(see tag for placement)
Element 21 - C/P and re-size 40%. Move to bottom right side of tag in front of copy of element 18.
(see tag for placement)
Element 22 - C/P and re-size 60%. Move to bottom left corner of tag.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, re-size whole tag from 800 X 800 to 600 X 600. C/P and move her to the far right side of tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Frame 1 - C/P and move it up a little on tag.
Make sure Frame 1 is the highlighted layer. Grab your magic wand. Click in the middle of the frame layer.
Go to SELECTIONS - MODIFY - EXPAND 16 PIXELS - INVERT.
Open New Raster Layer. C/Paste into selection Paper 4.
Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab the CU now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to MULTIPLY.
(see tag for placement)
Lets do some elements now:
Element 7 - C/P and move to bottom right side of tag. Duplicate and mirror. Make sure these layers are UNDER the frame layers.
(see tag for placement)
Element 13 - C/P and re-size 50%. Move to bottom left corner of frame. Duplicate and mirror. Make sure this layer is OVER the frame layer.
(see tag for placement)
Element 14 - C/P and re-size 80%. Move to bottom middle of frame.
(see tag for placement)
Element 8 - C/P and re-size 40%. Move to middle of element 14.
(see tag for placement)
Element 3 - C/P and re-size 60%. Move to top right corner of frame. Duplicate and mirror.
(see tag for placement)
Element 2 - C/P and re-size 50%. Move to bottom middle of tag in front of element 8.
(see tag for placement)
Element 18 - C/P and and re-size 50%. Move to bottom left side of tag. Duplicate and mirror. Move the copy a bit to the left of tag.
(see tag for placement)
Wordart - C/P and re-size 70%. Move to bottom part of frame but a little left on tag.
(see tag for placement)
Element 21 - C/P and re-size 40%. Move to bottom right side of tag in front of copy of element 18.
(see tag for placement)
Element 22 - C/P and re-size 60%. Move to bottom left corner of tag.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, re-size whole tag from 800 X 800 to 600 X 600. C/P and move her to the far right side of tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday, 19 January 2014
This tutorial was written by me on January 19, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Alica Mujica
You can find this tube at the La Boutique De Luna HERE
This is part of a Valentine 12 pack. Comes with scrap kit.
Please Don't use this tube without a license.
Scrap Kit: All You Need Is Love by Alicia Mujica
You can find this kit at the La Boutique De Luna HERE
Mask: WSL 84 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P6. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Now the frame:
Element 22 - C/P and re-size 55%. Leave it where it lands.
Make sure this layer is the highlighted layer. Grab your magic wand. Grab your selection tool. Start at the top left corner of frame and draw a rectangle around the whole frame but a bit outside the edges.
Now go to SELECTIONS - INVERT.
Open New Raster Layer. C/Paste into selection P1.
You will want to do a similar selection process for all three frame areas.
I did each one separately.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Do the same for each frame area. I used two versions of the same tube just changed the sizing. Choose sizes that suit your tag.
(see tag for placement)
Now some more elements:
Cloud 4 - C/P and re-size 40%. Move to top right corner of tag. Duplicate and mirror. Make sure this layer is under ALL frame layers.
(see tag for placement)
Element 33 - C/P and re-size 50%. Move to upper left side of tag. Make sure this layer is also under the frame layer.
(see tag for placement)
Element 28 - C/P and re-size 30%. Move to far right side of tag over right part of frame.
(see tag for placement)
Element 26 - C/P and re-size 25%. Move to left side of tag, but closer to middle.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 40%. Move her to the right side of tag, but closer to the middle of the tag.
(see tag for placement)
New Raster – 800 X 800.
Open P6. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Now the frame:
Element 22 - C/P and re-size 55%. Leave it where it lands.
Make sure this layer is the highlighted layer. Grab your magic wand. Grab your selection tool. Start at the top left corner of frame and draw a rectangle around the whole frame but a bit outside the edges.
Now go to SELECTIONS - INVERT.
Open New Raster Layer. C/Paste into selection P1.
You will want to do a similar selection process for all three frame areas.
I did each one separately.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Do the same for each frame area. I used two versions of the same tube just changed the sizing. Choose sizes that suit your tag.
(see tag for placement)
Now some more elements:
Cloud 4 - C/P and re-size 40%. Move to top right corner of tag. Duplicate and mirror. Make sure this layer is under ALL frame layers.
(see tag for placement)
Element 33 - C/P and re-size 50%. Move to upper left side of tag. Make sure this layer is also under the frame layer.
(see tag for placement)
Element 28 - C/P and re-size 30%. Move to far right side of tag over right part of frame.
(see tag for placement)
Element 26 - C/P and re-size 25%. Move to left side of tag, but closer to middle.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 40%. Move her to the right side of tag, but closer to the middle of the tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Friday, 17 January 2014
This tutorial was written by me on January 17 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Pin Up Toons
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: IB Scrap Kit - Pin Up Toons April 2013 by Monti's Scraps
You can buy this kit at Creative Design Outlet HERE
Template: Template - 2 by True Taggin' Love HERE
Mask: WSL 84 HERE
Here goes:
The Template first:
Open template in PSP. Hold down
SHIFT button and tap your “D” key. Close
the original template. Delete the “Credits”
layer with her CR info.
Next thing I did was re-size this template to 600 X 600 and then changed the CANVAS SIZE to 700 X 700. To do those two things, go to IMAGE - RE-SIZE - make sure re size all layers and lock aspect ratio is checked - In PIXEL DIMENSIONS drop down menu, choose PIXELS. Change the tag size from 468 X 468 to 600 X 600. Then go to IMAGE - CANVAS SIZE - and change WIDTH AND HEIGHT to 700 X 700.
We are gonna do basically the same thing for the following layers, so in an effort to stop repeating myself, here is what you will do for each layer that we change out:
Next thing I did was re-size this template to 600 X 600 and then changed the CANVAS SIZE to 700 X 700. To do those two things, go to IMAGE - RE-SIZE - make sure re size all layers and lock aspect ratio is checked - In PIXEL DIMENSIONS drop down menu, choose PIXELS. Change the tag size from 468 X 468 to 600 X 600. Then go to IMAGE - CANVAS SIZE - and change WIDTH AND HEIGHT to 700 X 700.
We are gonna do basically the same thing for the following layers, so in an effort to stop repeating myself, here is what you will do for each layer that we change out:
Highlight layer. SELECTIONS - SELECT ALL - FLOAT - DE FLOAT
Open Paper(s) - C/P - SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT
NONE
Delete layer.
So it will go something like this:
You
will be changing these layers: bars, x shape and oval. We will leave the rest as is.
Highlight bars. Use directions above. Using Paper 1. Rename it Paper 1 - bars.
Highlight x shape. Same as above. Using Paper 3. Rename Paper 3 - x shape.
Highlight oval. Same as above. Using Paper 6. Rename Paper 6 - oval. Move all layers to the upper right corner of tag.
(see tag for placement)
Now for the mask layer:
Highlight x shape. Same as above. Using Paper 3. Rename Paper 3 - x shape.
Highlight oval. Same as above. Using Paper 6. Rename Paper 6 - oval. Move all layers to the upper right corner of tag.
(see tag for placement)
Now for the mask layer:
I used Paper 4. Open mask (WSL 84), then minimize.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and paste Paper 4 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL 84 from the drop down menu – OK. Duplicate and merge down. Re-size 115%.
Now for some elements:
Now for some elements:
Element 6 - C/P and re-size 40%. Move to bottom but a little right on tag.
(see tag for placement)
Element 7 - C/P and re-size 40%. Move to bottom but a little right on tag under element 6.
(see tag for placement)
Element 4 - C/P and re-size 50%. Move to bottom but a little left on tag beside elements 6 & 7.
(see tag for placement)
Element 19 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 18 - C/P and re-size 40%. Move to bottom right corner over element 19.
(see tag for placement)
Element 15 - C/P and re-size 40%. Move to bottom right corner over elements 18 & 19.
(see tag for placement)
Element 1 - C/P and re-size 40%. Move to bottom of tag under elements 6, 7 and 19.
(see tag for placement)
Element 12 - C/P and re-size 40%. Move to top left corer.
(see tag for placement)
Element 11 - C/P and re-size 40%. Free rotate 20º left and move to top right corner.
(see tag for placement)
Now for the tube layer:
If you are using the same tube as
me, grab it now. C/P and move her to the bottom left corner of tag.(see tag for placement)
Element 7 - C/P and re-size 40%. Move to bottom but a little right on tag under element 6.
(see tag for placement)
Element 4 - C/P and re-size 50%. Move to bottom but a little left on tag beside elements 6 & 7.
(see tag for placement)
Element 19 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 18 - C/P and re-size 40%. Move to bottom right corner over element 19.
(see tag for placement)
Element 15 - C/P and re-size 40%. Move to bottom right corner over elements 18 & 19.
(see tag for placement)
Element 1 - C/P and re-size 40%. Move to bottom of tag under elements 6, 7 and 19.
(see tag for placement)
Element 12 - C/P and re-size 40%. Move to top left corer.
(see tag for placement)
Element 11 - C/P and re-size 40%. Free rotate 20º left and move to top right corner.
(see tag for placement)
Now for the tube layer:
(see tag for placement)
Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
Subscribe to:
Posts
(Atom)