Search
SCRAPS BY P & A DEZIGNS . Powered by Blogger.

Contributors

Followers

Friday 1 May 2015

PTU Regina

8:47:00 pm | Posted by | Edit Post
 
 
 
*Right Click - Open Link In New Tab - On All Images To View Full Size*

PTU Regina

This tutorial was written by me on May 1, 2015.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X6 but any version would work.

Artist: Alehandra Vanhek
You can find this tube at Pics For Design   HERE 
This tube was gifted to me and can only be bought 
if you are a member of their Exclusive Club.
Do not use this tube unless you have a license.
Scrap Kit: Lady Stephanie by Scrappin With Lil Ole Me
You can find this kit at Tiny Turtle Designs  HERE
Mask: WSL 3  HERE

Let’s start with the mask layer: 
New Raster – 800 X 800.
Open Paper 6.  Open mask (WSL 3) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 3 – OK.  
Duplicate and merge down.
(see tag for placement)  
 
This will be the frame layer:   
Element 51 – C/P and move up on tag.  Make sure element 51 layer is still highlighted.  Grab your magic wand.  Click in the middle of frame.   
SELECTIONS - MODIFY - EXPAND 10 pixels. 
NEW RASTER LAYER - C/Paste into selection Paper 19.
SELECTION - SELECT NONE.  Now grab the tube you are using.
If you are using the same one as me, grab her now.  
Mirror, then C/P and move her into position on the left side of the frame.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and leave the original tube layer on LUMINANCE(L) and reduce the opacity to 50%.
(see tag for placement)
 
Now onto some elements: 
Element 62 - C/P and move to the upper right side of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 59 - C/P and move to upper right side of tag.  Make sure this layer is UNDER the frame layer(s).  Duplicate and mirror.
(see tag for placement)
Element 57 - C/P and move to upper middle of tag.  Make sure this layer is UNDER the frame layer(s).
(see tag for placement)
Element 54 - C/P and re-size 30%.  Move to upper right corner of frame.   Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement) 
Element 49 - C/P and re-size 50%.  Move to upper left corner of frame.
(see tag for placement)
Element 143 - C/P and re-size 75%.  Move to bottom middle of frame.
(see tag for placement)
  Element 81 - C/P and re-size 50%.  Move to bottom left side of frame.
(see tag for placement) 
Element 39 - C/P and re-size 35%.  Move to bottom far left corner of tag.
(see tag for placement)
Element 64 - C/P and re-size 30%.  Move to bottom left side of tag but to the right of element 39.
(see tag for placement)
Element 96 - C/P and re-size 30%.  Move to bottom left side of tag over element 39.
(see tag for placement)
Element 18 - C/P and re-size 35%.  Move to bottom middle of tag.
(see tag for placement)
Element 20 - C/P and re-size 35%.  Move to bottom left corner of tag in front of element 39.
(see tag for placement)
Element 98 - C/P and re-size 30%.  Move to bottom middle of tag in front of element 18.
(see tag for placement)
Element 115 - C/P and re-size 30%.  Move to bottom left side of tag, but to the right of element 20.
(see tag for placement)
Element 12 - C/P and re-size 15%.  Move to bottom left side of tag over the middle of element 115.
(see tag for placement)
Element 10 - C/P and re-size 15%.  Move to bottom left side of tag over element 115, but to the left of element 12.
(see tag for placement)
Element 14 - C/P and re-size 20%.  Move to bottom left side of tag over element 115, but to the right of element 10.
(see tag for placement)
Element 113 - C/P and re-size 15%.  Move to bottom left side of tag over element 115, in front of elements 14, 10, 12 and 113.
(see tag for placement)
Element 21 - C/P and re-size 40%.  Move to bottom right side of tag.
(see tag for placement)
Element 58 - C/P and re-size 25%.  Move to top left side of frame.
(see tag for placement)
Element 90 - C/P and move to upper part of frame and just a tad to the right.
(see tag for placement)

I placed the tube layer(s) here: 
If your gonna use the same tube as I did, C/P your choice of the full version of the tube now.  Re-size 25% and move her to the bottom right side of tag.
(see tag for placement) 
 
Add drop shadow to layers of your choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black

 Now you can add name and  © information.  Save as .png and re-size if you wish.
I re-size before I add name and © info and then save.
Let me know what you think of this tutorial.
   
Labels:,,,,,

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)

My TOU

All things I provide on this blog are my own creation.
Any resemblance to others is strictly coincidence.
Please do not share.
Do not claim as yours.
If you use any items here please link back to my blog.
No translations of my tutorials.
The tutorials here are merely guidelines and you are perfectly welcome to do your own thing.
All links were current and available at the time of their posting. I cannot control who comes and goes, so if you find a broken link, please use a suitable replacement item.
Feel free to send me anything that you make with my stuff and I will gladly showcase it. My email is merrittlise@gmail.com

Talk to Me