Sunday, 6 April 2014
This tutorial was written by me on April 6, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Deacon Black
You can find this tube at Creative Design Outlet HERE
Please Don't use this tube without a license.
Scrap Kit: ScrapLHD_IB-DeaconBlack-107-3
You can find this kit at the Creative Design Outlet HERE
Mask: MPM Mask 7 by Millie's PSP Madness HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 1. Open mask (MPM 7) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 7 – OK. Duplicate and merge down. Re-size 110%.
This will be the frame layer:
Frame 1 – C/P and move it up on tag. Re-size 80%. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 3. Keep selected.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. I used the CU here.
C/P and re-size 80%. Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to BURN.
(see tag for placement)
Some elements now:
Element 8 - C/P and move to upper left corner of tag. Make sure this layer is UNDER the frame layers. Duplicate and mirror.
(see tag for placement)
Element 25 - C/P and move to top right side of frame. Make sure this layer is also UNDER the frame layers. Duplicate and mirror.
(see tag for placement)
Element 19 - C/P and move to bottom left side of frame. Make sure this layer is OVER all the frame layers. All other layers will be OVER the frame layers.
(see tag for placement)
Element 30 - C/P and re-size 70%. Move to bottom middle beneath frame.
(see tag for placement)
Element 5 - C/P and re-size 40%. Move to top left corner of tag.
(see tag for placement)
Element 22 - C/P and re-size 40%. Move to bottom middle of tag over element 30.
(see tag for placement)
Element 23 - C/P and re-size 30%. Move to bottom middle right side of element 30.
(see tag for placement)
Element 21 - C/P and move to top right side of tag.
(see tag for placement)
Element 6 - C/P and mirror. Move to bottom right corner of frame.
(see tag for placement)
Element 27 - C/P and re-size 30%. Move to middle of element 6.
(see tag for placement)
Element 12 - C/P and re-size 50%. Mirror and move to left side of element 6.
(see tag for placement)
Element 26 - C/P and mirror. Move to bottom right corner of tag.
(see tag for placement)
I place the tube layer(s) here:
If you are using the same tube as me, you need to re-size the tag before you add her. Re-size the whole tag from 800 X 800 to 600 X 600. C/P and move her to bottom left corner of tag.
(see tag for placement)
New Raster – 800 X 800.
Open Paper 1. Open mask (MPM 7) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 1 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find MPM 7 – OK. Duplicate and merge down. Re-size 110%.
This will be the frame layer:
Frame 1 – C/P and move it up on tag. Re-size 80%. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of frame. SELECTIONS - MODIFY - EXPAND 8 pixels.
NEW RASTER LAYER - C/Paste into selection Paper 3. Keep selected.
Now grab the tube you are using. If you are using the same one(s) as me, grab it now. I used the CU here.
C/P and re-size 80%. Move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT.
Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to BURN.
(see tag for placement)
Some elements now:
Element 8 - C/P and move to upper left corner of tag. Make sure this layer is UNDER the frame layers. Duplicate and mirror.
(see tag for placement)
Element 25 - C/P and move to top right side of frame. Make sure this layer is also UNDER the frame layers. Duplicate and mirror.
(see tag for placement)
Element 19 - C/P and move to bottom left side of frame. Make sure this layer is OVER all the frame layers. All other layers will be OVER the frame layers.
(see tag for placement)
Element 30 - C/P and re-size 70%. Move to bottom middle beneath frame.
(see tag for placement)
Element 5 - C/P and re-size 40%. Move to top left corner of tag.
(see tag for placement)
Element 22 - C/P and re-size 40%. Move to bottom middle of tag over element 30.
(see tag for placement)
Element 23 - C/P and re-size 30%. Move to bottom middle right side of element 30.
(see tag for placement)
Element 21 - C/P and move to top right side of tag.
(see tag for placement)
Element 6 - C/P and mirror. Move to bottom right corner of frame.
(see tag for placement)
Element 27 - C/P and re-size 30%. Move to middle of element 6.
(see tag for placement)
Element 12 - C/P and re-size 50%. Mirror and move to left side of element 6.
(see tag for placement)
Element 26 - C/P and mirror. Move to bottom right corner of tag.
(see tag for placement)
I place the tube layer(s) here:
If you are using the same tube as me, you need to re-size the tag before you add her. Re-size the whole tag from 800 X 800 to 600 X 600. C/P and move her to bottom left corner of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Post Comments
(Atom)
0 comments:
Post a Comment