Sunday, 26 October 2014
PTU Smooches
This tutorial was written by me on October 26, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X6 but any version would work.
Artist: Jessica Dougherty
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Scrap Kit: ScrapLHD_IB-JessicaDougherty-42-3
You can find this kit by Ladyhawwk Design at Creative Design Outlet HERE
You can find this kit by Ladyhawwk Design at Creative Design Outlet HERE
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down.
Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down.
Re-size 115%.
Now onto some elements:
Wordart - C/P and leave where it lands. Make sure this layer is UNDER the Element 7 layer(s). Use the drop shadow described below, but change the color to white. Then do it a second time but change the V & H to -2.
Element 1 - C/P and move so the middle of the bottom of this layer is just below the bottom of element 7. Make sure this layer is UNDER the Element 7 layer(s).
Element 15 - C/P and re-size 30%. Move to the lower right side of tag over element 9.
So, I did something a little different again. I changed the size of the tag BEFORE I pasted the tube on the tag. So, here goes..... Re-size tag from 800 X 800 to 600 X 600 pixels. Now, if you use the same tube as me, C/P it now. Mirror and move her to the bottom left corner of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I add
name and © info and then save.
Let me know what you think of
this tutorial.
Saturday, 25 October 2014
This tutorial was written by me on October 25, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X2 but any version will do.
Artist: Delphine Demers
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Scrap Kit: ScrapCCS_IB-DelphineDemers-69-1
You can find this kit by Creative Crazy Scraps at Creative Design Outlet HERE
Mask: WSL 116 HEREYou can find this kit by Creative Crazy Scraps at Creative Design Outlet HERE
Here goes:
Element 19 - C/P and re-size 75%. Move to upper right corner of tag.
(see tag for placement)
Element 9 - C/P and move to far upper left corner of tag. Duplicate and mirror. Move copy next to original.
(see tag for placement)
Element 14 - C/P and move to top right side of tag.
(see tag for placement)
Element 5 - C/P and move to upper left side of tag in front of element and copy of element 9.
(see tag for placement)
Element 6 - C/P and re-size 40%. Move to upper right corner of tag over element 14 and in front of element 19.
(see tag for placement)
Element 4 - C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Element 16 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 13 - C/P and re-size 40%. Move to lower middle of tag over element 16.
(see tag for placement)
Wordart - C/P and move to top middle of tag.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and move it to the lower right corner of tag.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
(see tag for placement)
Element 9 - C/P and move to far upper left corner of tag. Duplicate and mirror. Move copy next to original.
(see tag for placement)
Element 14 - C/P and move to top right side of tag.
(see tag for placement)
Element 5 - C/P and move to upper left side of tag in front of element and copy of element 9.
(see tag for placement)
Element 6 - C/P and re-size 40%. Move to upper right corner of tag over element 14 and in front of element 19.
(see tag for placement)
Element 4 - C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Element 16 - C/P and move to bottom middle of tag.
(see tag for placement)
Element 13 - C/P and re-size 40%. Move to lower middle of tag over element 16.
(see tag for placement)
Wordart - C/P and move to top middle of tag.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and move it to the lower right corner of tag.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Save and add
name and © info.
Let me know what you think of
this tutorial.
I would love to see any results.
Sunday, 19 October 2014
This tutorial was written by me on October 19, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X2 but any version will do.
Artist: Chris Ortega
I do not remember where I got this tube, but you only need to do a google search to find it. This tube is a Free To Use tube and no license is necessary, but you do need your proper © information.
Here goes:
Element 79 - C/P and move to upper middle of tag over frame. Make sure this layer, and all other layer(s), are OVER the frame layer(s).
(see tag for placement)
Element 20 - C/P and move to upper left side of tag in front of frame. Duplicate and mirror.
(see tag for placement)
Element 81 - C/P and move to lower left corner of tag in front of frame. Duplicate and mirror.
(see tag for placement)
Element 45 - C/P and re-size 50%. Move to bottom left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 50 - C/P and re-size 50%. Move to bottom left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 125 - C/P and re-size 5-%. Move to bottom right corner of tag. Duplicate and mirror.
(see tag for placement)
Element 23 - C/P and re-size 40%. Move to bottom right corner in front of element 125.
(see tag for placement)
Element 96 - C/P and re-size 50%. Move to bottom left corner in front of copy of element 125.
(see tag for placement)
Element 16 - C/P and re-size 30%. Move to lower middle of tag over element 96.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and move it down just a bit and just a tad to the left.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
(see tag for placement)
Element 20 - C/P and move to upper left side of tag in front of frame. Duplicate and mirror.
(see tag for placement)
Element 81 - C/P and move to lower left corner of tag in front of frame. Duplicate and mirror.
(see tag for placement)
Element 45 - C/P and re-size 50%. Move to bottom left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 50 - C/P and re-size 50%. Move to bottom left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 125 - C/P and re-size 5-%. Move to bottom right corner of tag. Duplicate and mirror.
(see tag for placement)
Element 23 - C/P and re-size 40%. Move to bottom right corner in front of element 125.
(see tag for placement)
Element 96 - C/P and re-size 50%. Move to bottom left corner in front of copy of element 125.
(see tag for placement)
Element 16 - C/P and re-size 30%. Move to lower middle of tag over element 96.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and move it down just a bit and just a tad to the left.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Save and add
name and © info.
Let me know what you think of
this tutorial.
I would love to see any results.
Thursday, 16 October 2014
PTU Fallen Angel
This tutorial was written by me on October 16, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X6 but any version would work.
Artist: Enamorte
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Scrap Kit: ScrapSchnegge_Fallen-Angel-Mega
You can find this kit by Schnegge's Scraps at Creative Design Outlet HERE
You can find this kit by Schnegge's Scraps at Creative Design Outlet HERE
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 14. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 14 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down.
Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 14. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 14 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down.
Re-size 115%.
Now onto some elements:
Wire - C/P and move to top left corner of tag. Make sure this layer is UNDER the frame layer(s). Duplicate and mirror, then flip.
Bloody Hearts 02 - C/P and move to top right corner of tag. Make sure this layer is also UNDER the frame layer(s). Duplicate and mirror.
Vine - C/P and move to top left corner of tag. Duplicate and mirror.
If you use the same tube as me, C/P it now. Mirror and move her to the bottom right corner of tag beside copy of Candle 03.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I add
name and © info and then save.
Let me know what you think of
this tutorial.
Sunday, 12 October 2014
PTU Fairy Dream
This tutorial was written by me on October 12, 2014.
It was made out of my own creation and any similarity is purely
coincidental.
I used PSP X6 but any version would work.
Artist: Enamorte
This tube can be found at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 7. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down.
Re-size 115%.
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 7. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down.
Re-size 115%.
(see tag for placement)
Now onto some elements:
Element 76 - C/P and move to top middle of tag. Make sure this layer is UNDER the frame layer(s).
Element 15 - C/P and move to right side of tag. This layer is also UNDER the frame layer(s). Duplicate and mirror.
Element 13 - C/P and move to right side of frame over element 04 layer. Duplicate and mirror.
If you are using the same tube as me. C/P and move to bottom left side of tag.
Add drop shadow to layers of your
choosing.
I've used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I add
name and © info and then save.
Let me know what you think of
this tutorial.
Friday, 10 October 2014
Sunday, 5 October 2014
This tutorial was written by me on October 5, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSP X2 but any version will do.
Artist:Rachel Anderson
I bought this tube at Creative Design Outlet HERE
Do not use this tube
unless you have a license.
Scrap Kit: ScrapTP_ChangingSeasons
You can find this kit by Tasha's Playground at Creative Design Outlet HERE
Mask: WSL 84 HEREYou can find this kit by Tasha's Playground at Creative Design Outlet HERE
Here goes:
Element 14 - C/P and move to upper right corner of tag. Duplicate and mirror.
(see tag for placement)
Element 64 - C/P and re-size 85%. Move to far left side of tag. Duplicate and mirror.
(see tag for placement)
Element 13 - C/P and re-size 75%. Move to just about the bottom right corner of tag. Duplicate and mirror.
(see tag for placement)
Element 30 - C/P and move to bottom left corner. Duplicate and mirror.
(see tag for placement)
Element 29 - C/P and keep in the middle but move to the lower part of tag.
(see tag for placement)
Element 34 - C/P and re-size 85%. Move to bottom middle of tag.
(see tag for placement)
Element 51 - C/P and re-size 50%. Move to lower right side of tag and have it sitting on the right corner of element 34.
(see tag for placement)
Element 3 - C/P and re-size 30%. Move to top right corner of tag over element 64. Duplicate and mirror, then move down a bit.
(see tag for placement)
Element 19 - C/P and re-size 35%. Move to bottom right side of tag in front of element 34 and below element 51.
(see tag for placement)
Element 54 - C/P and move to bottom middle of tag. Then move a bit to the left side of element 34.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and re-size 75%. Place it like it is sitting on element 34. I also snagged the butterfly. I C/P and re-sized 75%. Moved it so it is sitting just over the hand of the tube.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
(see tag for placement)
Element 64 - C/P and re-size 85%. Move to far left side of tag. Duplicate and mirror.
(see tag for placement)
Element 13 - C/P and re-size 75%. Move to just about the bottom right corner of tag. Duplicate and mirror.
(see tag for placement)
Element 30 - C/P and move to bottom left corner. Duplicate and mirror.
(see tag for placement)
Element 29 - C/P and keep in the middle but move to the lower part of tag.
(see tag for placement)
Element 34 - C/P and re-size 85%. Move to bottom middle of tag.
(see tag for placement)
Element 51 - C/P and re-size 50%. Move to lower right side of tag and have it sitting on the right corner of element 34.
(see tag for placement)
Element 3 - C/P and re-size 30%. Move to top right corner of tag over element 64. Duplicate and mirror, then move down a bit.
(see tag for placement)
Element 19 - C/P and re-size 35%. Move to bottom right side of tag in front of element 34 and below element 51.
(see tag for placement)
Element 54 - C/P and move to bottom middle of tag. Then move a bit to the left side of element 34.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, grab it now. C/P and re-size 75%. Place it like it is sitting on element 34. I also snagged the butterfly. I C/P and re-sized 75%. Moved it so it is sitting just over the hand of the tube.
(see tag for placement)
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Save and add
name and © info.
Let me know what you think of
this tutorial.
I would love to see any results.
Subscribe to:
Posts
(Atom)