Showing posts with label Jose Cano. Show all posts
Showing posts with label Jose Cano. Show all posts
Thursday, 9 January 2014
This tutorial was written by me on January 9, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jose Cano
You can find this tube at the Cano Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: My Life My Moment by Horseplay Pasture
You can find this kit at the Scraps From The Heart HERE
Mask: WSL 84 HERE
Filter: Eye Candy 4000
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P13. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Element 23 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your selection tool. Draw a rectangle around the middle of the frame.
NEW RASTER LAYER - C/Paste into selection P3.
Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab the CU of it now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to MULTIPLY and reduce opacity to 70%.
(see tag for placements)
Some elements now:
Element 31 - C/P and re-size 85%. Move to top left corner of tag. Duplicate and mirror then flip. Make sure these layers is under the frame layers.
(see tag for placement)
Element 65 - C/P and re-size 85%. Move to right middle side of tag. Duplicate and mirror. Make sure these layers are under the frame layers.
(see tag for placement)
Element 52 - C/P and re-size 60%. Move to bottom right corner of frame. Duplicate and mirror. Make sure this layer is over the frame layers.
(see tag for placement)
Element 66 - C/P and re-size 70%. Move to bottom of frame.
(see tag for placement)
Element 10 - C/P and re-size 40%. Move to bottom left corner of frame. Duplicate and mirror.
(see tag for placement)
Element 9 - C/P and re-size 35%. Move to bottom left corner of frame but to the right side of element 10.
(see tag for placement)
Element 64 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 27 - C/P and move to top middle of tag.
(see tag for placement)
I did a gradient glow around this word art. I used Eye Candy 4000 and used these settings:
New Raster – 800 X 800.
Open P13. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P13 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Element 23 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your selection tool. Draw a rectangle around the middle of the frame.
NEW RASTER LAYER - C/Paste into selection P3.
Keep selected.
Now grab the tube you are using. If you are using the same one as me, grab the CU of it now. C/P and move her into position.
SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK.
Change BLEND MODE of copy of tube layer to HARD LIGHT and change the original tube layer to MULTIPLY and reduce opacity to 70%.
(see tag for placements)
Some elements now:
Element 31 - C/P and re-size 85%. Move to top left corner of tag. Duplicate and mirror then flip. Make sure these layers is under the frame layers.
(see tag for placement)
Element 65 - C/P and re-size 85%. Move to right middle side of tag. Duplicate and mirror. Make sure these layers are under the frame layers.
(see tag for placement)
Element 52 - C/P and re-size 60%. Move to bottom right corner of frame. Duplicate and mirror. Make sure this layer is over the frame layers.
(see tag for placement)
Element 66 - C/P and re-size 70%. Move to bottom of frame.
(see tag for placement)
Element 10 - C/P and re-size 40%. Move to bottom left corner of frame. Duplicate and mirror.
(see tag for placement)
Element 9 - C/P and re-size 35%. Move to bottom left corner of frame but to the right side of element 10.
(see tag for placement)
Element 64 - C/P and re-size 40%. Move to bottom right corner of tag.
(see tag for placement)
Element 27 - C/P and move to top middle of tag.
(see tag for placement)
I did a gradient glow around this word art. I used Eye Candy 4000 and used these settings:
Element 12 - C/P and re-size 70%. Move to bottom middle of frame.
(see tag for placement)
Element 37 - C/P and move to bottom middle of tag in front of element 12.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 60%. Mirror and move her to the far left corner of tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Monday, 6 January 2014
This tutorial was written by me on January 6, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jose Cano
You can find this tube at the Cano Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Honey Kit by Desirena Designs
You can find this Exclusive kit at the Cano Tube Store HERE
Mask: WSL 116 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P7. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
This will be the frame layer:
Element 20 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection P1.
SELECTIONS - SELECT NONE.
(see tag for placements)
Some elements now:
Element 28 - C/P and move to bottom of tag. Duplicate and mirror then flip. Make sure this layer is under all frame layers.
(see tag for placement)
Element 15 - C/P and re-size 70%. Move to right middle side of tag. Duplicate and mirror. Make sure this layer is under all frame layers.
(see tag for placement)
Element 32 - C/P and move up a little on tag. Make sure this layer is under frame layer, but over P1 layer.
(see tag for placement)
Element 16 - C/P and move to top left corner of tag. Duplicate and mirror. Make sure this layer is top most layer.
(see tag for placement)
Element 24 - C/P and move to upper left side of frame. Duplicate and mirror. Make sure this is over element 16.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to bottom right corner of tag.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom right side of tag. Duplicate and move copy a little to the left.
(see tag for placement)
Element 12 - C/P and re-size 20%. Move to bottom right side of tag beside element 13.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left corner of tag.
(see tag for placement)
Element 7 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 25 - C/P and re-size 50%. Move to bottom left side of tag in front of element 7.
(see tag for placement)
Element 6 - C/P and re-size 50%. Flip this layer and move in front of glass of champagne. Make sure this is the top most layer.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 60%. Move over frame layer. Move her down just a little. Make sure you grab the champagne glass too. Move this layer just under Element 6.
(see tag for placement)
New Raster – 800 X 800.
Open P7. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
This will be the frame layer:
Element 20 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection P1.
SELECTIONS - SELECT NONE.
(see tag for placements)
Some elements now:
Element 28 - C/P and move to bottom of tag. Duplicate and mirror then flip. Make sure this layer is under all frame layers.
(see tag for placement)
Element 15 - C/P and re-size 70%. Move to right middle side of tag. Duplicate and mirror. Make sure this layer is under all frame layers.
(see tag for placement)
Element 32 - C/P and move up a little on tag. Make sure this layer is under frame layer, but over P1 layer.
(see tag for placement)
Element 16 - C/P and move to top left corner of tag. Duplicate and mirror. Make sure this layer is top most layer.
(see tag for placement)
Element 24 - C/P and move to upper left side of frame. Duplicate and mirror. Make sure this is over element 16.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to bottom right corner of tag.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom right side of tag. Duplicate and move copy a little to the left.
(see tag for placement)
Element 12 - C/P and re-size 20%. Move to bottom right side of tag beside element 13.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left corner of tag.
(see tag for placement)
Element 7 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 25 - C/P and re-size 50%. Move to bottom left side of tag in front of element 7.
(see tag for placement)
Element 6 - C/P and re-size 50%. Flip this layer and move in front of glass of champagne. Make sure this is the top most layer.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 60%. Move over frame layer. Move her down just a little. Make sure you grab the champagne glass too. Move this layer just under Element 6.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Wednesday, 11 December 2013
PTU Cowgirl Redux
This tutorial was written by me on December 11, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jose Cano
You can find this tube at Cano Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Cowgirl Redux by Irish Princess Designs
You can get this kit at Cano Tubes Store HERE
Mask: WSL 84 HERE
Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 2. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Now for some elements:SELECTIONS – SELECT ALL – Copy and paste Paper 2 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Fence – C/P and move up a bit on the tag.
(see tag for placement)
Grass – C/P and move to the bottom of the tag. Duplicate and mirror.
(see tag for placement)
Windmill – C/P Move to the top middle of the tag.
(see tag for placement)
Stage - C/P and leave it where it lands
(see tag for placement)
Cactus - C/P and move lower left side of tag. Duplicate and mirror.
(see tag for placement)
Leaves – C/P and re-size 40%. Move to bottom left side of tag. Duplicate, mirror and move copy back to left side under original layer.
(see tag for placement)
Wheel – C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
(see tag for placement)
Grass – C/P and move to the bottom of the tag. Duplicate and mirror.
(see tag for placement)
Windmill – C/P Move to the top middle of the tag.
(see tag for placement)
Stage - C/P and leave it where it lands
(see tag for placement)
Cactus - C/P and move lower left side of tag. Duplicate and mirror.
(see tag for placement)
Leaves – C/P and re-size 40%. Move to bottom left side of tag. Duplicate, mirror and move copy back to left side under original layer.
(see tag for placement)
Wheel – C/P and re-size 40%. Move to bottom left side of tag.
(see tag for placement)
Skull – C/P and re-size 40%. Move to bottom left side of tag in front of wheel.
(see tag for placement)
Horse - C/P and re-size 80%. Move to down a bit but leave in the middle of tag.
(see tag for placement)
Hay - C/P and re-size 70%. Move to bottom right side of tag.
(see tag for placement)
I'll place the tube layer now:
(see tag for placement)
Horse - C/P and re-size 80%. Move to down a bit but leave in the middle of tag.
(see tag for placement)
Hay - C/P and re-size 70%. Move to bottom right side of tag.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab it now. C/P and re-size 50%. Move to bottom middle of tag.
(see tag for placement)
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Monday, 2 December 2013
This tutorial was written by me on November 30, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jose Cano
You can find this tube at the Cano Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Cupcake 2 Kit by Sweet Tooth Studios
You can find this Exclusive kit at the Cano Tube Store HERE
Mask: WSL 84 HERE
Font: MA Sexy Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Element 2 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection Paper 12. Keep selected.
(see tag for placements)
I place the tube layer here:
If you are using the same tube as me, grab CU now. C/P and re-size 70%. Move over frame layer. Duplicate and move copy under frame layer but over paper layer.
SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE.
Grab your magic wand again, highlight your frame layer again, click on the inside of the frame. Go to SELECTIONS - INVERT, and grab your eraser tool. Highlight your original tube layer. Erase the parts of the legs and arm that hang over the frame layer.
SELECTIONS - SELECT NONE.
(see tag for placement)
Some elements now:
Element 38 - C/P and re-size 50%. Move to top left corner of frame.
(see tag for placement)
Element 9 - C/P and re-size 50%. Mirror and move to right corner of frame.
(see tag for placement)
Element 43 - C/P and re-size 50%. Mirror and move to top right corner of frame over element 9.
(see tag for placement)
Element 18 - C/P and re-size 80%. Move to bottom left corner of frame.
(see tag for placement)
Element 44 - C/P re-size 50%. Move to bottom left corner of frame in front of element 18.
(see tag for placement)
Element 46 - C/P and re-size 70%. Move to bottom left, but to the right of element 44.
(see tag for placement)
New Raster – 800 X 800.
Open Paper 3. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Element 2 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection Paper 12. Keep selected.
(see tag for placements)
I place the tube layer here:
If you are using the same tube as me, grab CU now. C/P and re-size 70%. Move over frame layer. Duplicate and move copy under frame layer but over paper layer.
SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE.
Grab your magic wand again, highlight your frame layer again, click on the inside of the frame. Go to SELECTIONS - INVERT, and grab your eraser tool. Highlight your original tube layer. Erase the parts of the legs and arm that hang over the frame layer.
SELECTIONS - SELECT NONE.
(see tag for placement)
Some elements now:
Element 38 - C/P and re-size 50%. Move to top left corner of frame.
(see tag for placement)
Element 9 - C/P and re-size 50%. Mirror and move to right corner of frame.
(see tag for placement)
Element 43 - C/P and re-size 50%. Mirror and move to top right corner of frame over element 9.
(see tag for placement)
Element 18 - C/P and re-size 80%. Move to bottom left corner of frame.
(see tag for placement)
Element 44 - C/P re-size 50%. Move to bottom left corner of frame in front of element 18.
(see tag for placement)
Element 46 - C/P and re-size 70%. Move to bottom left, but to the right of element 44.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)