Showing posts with label Desirena Designs. Show all posts
Showing posts with label Desirena Designs. Show all posts
Monday, 6 January 2014
This tutorial was written by me on January 6, 2014.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jose Cano
You can find this tube at the Cano Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Honey Kit by Desirena Designs
You can find this Exclusive kit at the Cano Tube Store HERE
Mask: WSL 116 HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P7. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
This will be the frame layer:
Element 20 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection P1.
SELECTIONS - SELECT NONE.
(see tag for placements)
Some elements now:
Element 28 - C/P and move to bottom of tag. Duplicate and mirror then flip. Make sure this layer is under all frame layers.
(see tag for placement)
Element 15 - C/P and re-size 70%. Move to right middle side of tag. Duplicate and mirror. Make sure this layer is under all frame layers.
(see tag for placement)
Element 32 - C/P and move up a little on tag. Make sure this layer is under frame layer, but over P1 layer.
(see tag for placement)
Element 16 - C/P and move to top left corner of tag. Duplicate and mirror. Make sure this layer is top most layer.
(see tag for placement)
Element 24 - C/P and move to upper left side of frame. Duplicate and mirror. Make sure this is over element 16.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to bottom right corner of tag.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom right side of tag. Duplicate and move copy a little to the left.
(see tag for placement)
Element 12 - C/P and re-size 20%. Move to bottom right side of tag beside element 13.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left corner of tag.
(see tag for placement)
Element 7 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 25 - C/P and re-size 50%. Move to bottom left side of tag in front of element 7.
(see tag for placement)
Element 6 - C/P and re-size 50%. Flip this layer and move in front of glass of champagne. Make sure this is the top most layer.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 60%. Move over frame layer. Move her down just a little. Make sure you grab the champagne glass too. Move this layer just under Element 6.
(see tag for placement)
New Raster – 800 X 800.
Open P7. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P7 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
This will be the frame layer:
Element 20 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection P1.
SELECTIONS - SELECT NONE.
(see tag for placements)
Some elements now:
Element 28 - C/P and move to bottom of tag. Duplicate and mirror then flip. Make sure this layer is under all frame layers.
(see tag for placement)
Element 15 - C/P and re-size 70%. Move to right middle side of tag. Duplicate and mirror. Make sure this layer is under all frame layers.
(see tag for placement)
Element 32 - C/P and move up a little on tag. Make sure this layer is under frame layer, but over P1 layer.
(see tag for placement)
Element 16 - C/P and move to top left corner of tag. Duplicate and mirror. Make sure this layer is top most layer.
(see tag for placement)
Element 24 - C/P and move to upper left side of frame. Duplicate and mirror. Make sure this is over element 16.
(see tag for placement)
Element 17 - C/P and re-size 50%. Move to bottom right corner of tag.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom right side of tag. Duplicate and move copy a little to the left.
(see tag for placement)
Element 12 - C/P and re-size 20%. Move to bottom right side of tag beside element 13.
(see tag for placement)
Element 9 - C/P and re-size 30%. Move to bottom left corner of tag.
(see tag for placement)
Element 7 - C/P and re-size 30%. Move to bottom left side of tag.
(see tag for placement)
Element 25 - C/P and re-size 50%. Move to bottom left side of tag in front of element 7.
(see tag for placement)
Element 6 - C/P and re-size 50%. Flip this layer and move in front of glass of champagne. Make sure this is the top most layer.
(see tag for placement)
I place the tube layer here:
If you are using the same tube as me, grab it now. C/P and re-size 60%. Move over frame layer. Move her down just a little. Make sure you grab the champagne glass too. Move this layer just under Element 6.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Friday, 13 December 2013
This tutorial was written by me on December 12, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Arthur Crowe
You can find this tube at Arthur Crowe's Factory Store HERE
Please Don't use this tube without a license.
Scrap Kit: Drums Girl by Desirena Designs
This exclusive kit can be found at Arthur Crowe's Factory HERE
Here goes:
Open P 5. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste P 5 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
(see tag for placement)
Element 5 – C/P Move to upper left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 13 – C/P and move up just a little bit on the tag.
(see tag for placement)
Element 2 - C/P move to lower left side of tag.
(see tag for placement)
Element 26 - C/P and move to the upper middle of tag. Duplicate, mirror then flip. Move element up and to the right just a little.
(see tag for placement)
Element 7 – C/P and re-size 40%. Mirror and move to lower middle of tag in front of element 2.
(see tag for placement)
Element 1 – C/P and re-size 85%. Move to upper middle of tag over element 13.
(see tag for placement)
Element 5 – C/P Move to upper left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 13 – C/P and move up just a little bit on the tag.
(see tag for placement)
Element 2 - C/P move to lower left side of tag.
(see tag for placement)
Element 26 - C/P and move to the upper middle of tag. Duplicate, mirror then flip. Move element up and to the right just a little.
(see tag for placement)
Element 7 – C/P and re-size 40%. Mirror and move to lower middle of tag in front of element 2.
(see tag for placement)
Element 1 – C/P and re-size 85%. Move to upper middle of tag over element 13.
(see tag for placement)
Element 14 – C/P and re-size 50%. Move to lower right side of tag beside element 2
(see tag for placement)
Element 3 - C/P and move to upper right side of tag. Duplicate and mirror.
(see tag for placement)
Element 4 - C/P and re-size 40%. Move to upper right side in the middle of Element 3. Duplicate and mirror.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your the version you want to use now. C/P and re-size 45%. Move to bottom right side of tag and have her sitting on the mirror ball.
(see tag for placement)
(see tag for placement)
Element 3 - C/P and move to upper right side of tag. Duplicate and mirror.
(see tag for placement)
Element 4 - C/P and re-size 40%. Move to upper right side in the middle of Element 3. Duplicate and mirror.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your the version you want to use now. C/P and re-size 45%. Move to bottom right side of tag and have her sitting on the mirror ball.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Monday, 21 October 2013
PTU Andriana
This tutorial was written by me on October 21, 2013. It was made out of my own creation and any similarity is purely coincidental. I used PSPx2 but any version would work.
Artist: Roman Zaric
Here goes:
The Template first:
Open template in PSP. Hold down
SHIFT button and tap your “D” key. Close
the original template. Delete the “Credits”
layer with her CR info.
I don't like a white background unless I really need one, so I clear the
white background by highlighting the Raster 1layer and go to
EDIT - CLEAR.
EDIT - CLEAR.
Next
I changed the canvas size to 800 X 800. I also toggle all layers so that if I feel the need to move them on such a big canvas, I don't mess up the layering. You can do that by clicking on the LAYER LINK TOGGLE.
We are gonna do basically the same thing for the following layers, so in an effort to stop repeating myself, here is what you will do for each layer that we change out:
We are gonna do basically the same thing for the following layers, so in an effort to stop repeating myself, here is what you will do for each layer that we change out:
Highlight layer. SELECTIONS - SELECT ALL - FLOAT - DE FLOAT
Open Paper(s) - C/P - SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT
NONE
Delete layer.
So it will go something like this:
You
will be changing these layers: 1, 2, 3, 4, 6, 7, 8 and 9. We will delete 5 and
leave 8 and 9 as is. We will leave 1, 2, 3 and 4 pretty much where it is but have them as toggle 1 and toggle 2 for layers 6 and 8 and toggle 3 for 7 and 9.
Highlight 1. Using directions above. Use P12. Rename it P12 - 1.
Highlight 2. Same as above. Use P3. Rename P3 - 2.
Highlight 3. Same as above. Use P8. Rename P8 - 3.
Highlight 4. Same as above. Use P1. Rename P1 - 5.
(see tag for placement)
I used HUE/SATURATION/LIGHTNESS for layers 6 and 7, using the following setting:
Highlight 2. Same as above. Use P3. Rename P3 - 2.
Highlight 3. Same as above. Use P8. Rename P8 - 3.
Highlight 4. Same as above. Use P1. Rename P1 - 5.
(see tag for placement)
I used HUE/SATURATION/LIGHTNESS for layers 6 and 7, using the following setting:
We are gonna use our tube now:
Open tube, choose your favorite version. C/P and re-size 45%. Move over layer 6.
Highlight the layer 6 and go to SELECTIONS - SELECT ALL - FLOAT - DE-FLOAT - INVERT, Highlight tube layer, then hit DELETE. Duplicate tube layer. On the original tube layer:
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Open tube, choose your favorite version. C/P and re-size 45%. Move over layer 6.
Highlight the layer 6 and go to SELECTIONS - SELECT ALL - FLOAT - DE-FLOAT - INVERT, Highlight tube layer, then hit DELETE. Duplicate tube layer. On the original tube layer:
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to copy of tube layer and change BLEND MODE to SCREEN.
Do the same for layer 7 but mirror the tube before you delete anything.
Don't forget to toggle the tube layers in case you want to move them all.
Do the same for layer 7 but mirror the tube before you delete anything.
Don't forget to toggle the tube layers in case you want to move them all.
(see tag for placement)
Now for more elements:
Element 18 - C/P and move this layer under layer 6. You can leave this element in middle but move up just a tad.
(see tag for placement)
Element 3 - C/P and re-size 50%. Move to top right side of tag but on left side of layer 7. Duplicate and move a bit right and down to right side of layer 6.
(see tag for placement)
Element 26 - C/P and move to upper left side of tag.
(see tag for placement)
Element 11 - C/P and re-size 60%. Mirror and move to bottom right side of tag.
(see tag for placement)
Element 9 - C/P and re-size 40%. Move to bottom right side over element 11.
(see tag for placement)
Element 13 - C/P and re-size 35%. Move to bottom right side in front of element 11 and 9. Duplicate and move a bit left.
(see tag for placement)
Element 17 - C/P and move to upper left side of tag.
(see tag for placement)
Element 12 - C/P and re-size 75%. Move to top middle of tag.
(see tag for placement)
Now for the tube:
If you are using the same tube as me, C/P the version your choosing to use. Re-size by 45%. Mirror and move tube to bottom left side of tag.
Now for the mask layer:
Now for more elements:
Element 18 - C/P and move this layer under layer 6. You can leave this element in middle but move up just a tad.
(see tag for placement)
Element 3 - C/P and re-size 50%. Move to top right side of tag but on left side of layer 7. Duplicate and move a bit right and down to right side of layer 6.
(see tag for placement)
Element 26 - C/P and move to upper left side of tag.
(see tag for placement)
Element 11 - C/P and re-size 60%. Mirror and move to bottom right side of tag.
(see tag for placement)
Element 9 - C/P and re-size 40%. Move to bottom right side over element 11.
(see tag for placement)
Element 13 - C/P and re-size 35%. Move to bottom right side in front of element 11 and 9. Duplicate and move a bit left.
(see tag for placement)
Element 17 - C/P and move to upper left side of tag.
(see tag for placement)
Element 12 - C/P and re-size 75%. Move to top middle of tag.
(see tag for placement)
Now for the tube:
If you are using the same tube as me, C/P the version your choosing to use. Re-size by 45%. Mirror and move tube to bottom left side of tag.
Now for the mask layer:
Open P10 and WSL 84, then minimize.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and paste P10 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL 84 from the drop down menu – OK. Duplicate and merge down. Re-size 120%.
Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add name and © info.
Let me know what you think of this tutorial.
Wednesday, 7 August 2013
This tutorial was written by me
on August 7, 2013.
It was made out of my own
creation and any similarity is purely coincidental.
I used PSPx2 but any version
would work.
Artist: Roman Zaric
You can find this tube at Roman Zaric Tubes HERE
Do not use this tube
unless you have a license.
Scrap Kit: Ana by Desirena Designs
You can be find this kit at Roman Zaric Tubes HERE
Mask: WSL 84 HERE
Font: Lemon Chicken Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P6. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste P6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.
Duplicate and merge down. Re-size 110%.
New Raster – 800 X 800.
Open P6. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste P6 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK.
Duplicate and merge down. Re-size 110%.
Let’s do the frame layer now:
Element 23 – C/P and leave in the middle.
Grab your magic wand. Click in the middle of frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open P3.
Copy and paste into selection.
Grab tube. C/P and move into position.
SELECTIONS - INVERT - DELETE - INVERT.
Duplicate tube layers.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to LUMINANCE (L) and reduce opacity to 75.
(see tag for placements)
Element 23 – C/P and leave in the middle.
Grab your magic wand. Click in the middle of frame.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open P3.
Copy and paste into selection.
Grab tube. C/P and move into position.
SELECTIONS - INVERT - DELETE - INVERT.
Duplicate tube layers.
ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to LUMINANCE (L) and reduce opacity to 75.
(see tag for placements)
Now for some elements:
Element 30 – C/P and move to upper left side behind frame layers. Duplicate and mirror then flip.
(see tag for placement)
Element 25 – C/P and move to upper right side in front of frame. Duplicate three times and re-size 90% each copy and move where you like.
(see tag for placement)
Now for more elements:
Element 17 – C/P and re-size 80%. Move to bottom right side of tag.
(see tag for placement)
Element 20 – C/P and re-size 50%. Move to bottom right side of tag in front of element 17.
(see tag for placement)
Element 15 – C/P and re-size 50%. Move to bottom right side of tag in front but to the left of element 20.
(see tag for placement)
Lets do the tube layer:
If you are using the same tube as me, grab it.
If you are using the same tube as me, grab it.
C/P and re-size 45%. Mirror and move to bottom left side of tag.
(see tag for placement)
(see tag for placement)
Now for more elements:
Element 17 – C/P and re-size 80%. Move to bottom right side of tag.
(see tag for placement)
Element 20 – C/P and re-size 50%. Move to bottom right side of tag in front of element 17.
(see tag for placement)
Element 15 – C/P and re-size 50%. Move to bottom right side of tag in front but to the left of element 20.
(see tag for placement)
Element 14 – C/P and re-size 30%. Move to bottom right side of tag in front of element 15.
(see tag for placement)
(see tag for placement)
Element 12 – C/P and re-size 70%. Move to bottom left side of tag.
(see tag for placement)
Element 19 – C/P and re-size 40%. Move to bottom left side in front of element 12. Free rotate 50ยบ left.
(see tag for placement)
Element 10 - C/P and re-size 30%. Move to bottom left side of tag in front of 19. Duplicate and move beside original.
(see tag for placement)
Element 10 - C/P and re-size 30%. Move to bottom left side of tag in front of 19. Duplicate and move beside original.
(see tag for placement)
Element 18 - C/P and re-size 20%. Move to bottom left side in front of element 19.
(see tag for placement)
Element 16 - C/P and re-size 20%. Move to bottom left side in front of element 11.
(see tag for placement)
Element 2 - C/P and re-size 70%. Move to top right corner of tag. Duplicate and mirror.
(see tag for placement)
Add drop shadow to layers of your choosing.
Element 18 - C/P and re-size 20%. Move to bottom left side in front of element 19.
(see tag for placement)
Element 16 - C/P and re-size 20%. Move to bottom left side in front of element 11.
(see tag for placement)
Element 2 - C/P and re-size 70%. Move to top right corner of tag. Duplicate and mirror.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)