Showing posts with label Sweet Tooth Studio. Show all posts
Showing posts with label Sweet Tooth Studio. Show all posts
Monday, 2 December 2013
This tutorial was written by me on November 30, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Jose Cano
You can find this tube at the Cano Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Cupcake 2 Kit by Sweet Tooth Studios
You can find this Exclusive kit at the Cano Tube Store HERE
Mask: WSL 84 HERE
Font: MA Sexy Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 3. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Element 2 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection Paper 12. Keep selected.
(see tag for placements)
I place the tube layer here:
If you are using the same tube as me, grab CU now. C/P and re-size 70%. Move over frame layer. Duplicate and move copy under frame layer but over paper layer.
SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE.
Grab your magic wand again, highlight your frame layer again, click on the inside of the frame. Go to SELECTIONS - INVERT, and grab your eraser tool. Highlight your original tube layer. Erase the parts of the legs and arm that hang over the frame layer.
SELECTIONS - SELECT NONE.
(see tag for placement)
Some elements now:
Element 38 - C/P and re-size 50%. Move to top left corner of frame.
(see tag for placement)
Element 9 - C/P and re-size 50%. Mirror and move to right corner of frame.
(see tag for placement)
Element 43 - C/P and re-size 50%. Mirror and move to top right corner of frame over element 9.
(see tag for placement)
Element 18 - C/P and re-size 80%. Move to bottom left corner of frame.
(see tag for placement)
Element 44 - C/P re-size 50%. Move to bottom left corner of frame in front of element 18.
(see tag for placement)
Element 46 - C/P and re-size 70%. Move to bottom left, but to the right of element 44.
(see tag for placement)
New Raster – 800 X 800.
Open Paper 3. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 3 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
This will be the frame layer:
Element 2 – C/P and leave frame where it lands. Make sure your frame layer is still highlighted. Grab your magic wand. Click in the middle of the frame.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
NEW RASTER LAYER - C/Paste into selection Paper 12. Keep selected.
(see tag for placements)
I place the tube layer here:
If you are using the same tube as me, grab CU now. C/P and re-size 70%. Move over frame layer. Duplicate and move copy under frame layer but over paper layer.
SELECTIONS - INVERT - DELETE - SELECTIONS - SELECT NONE.
Grab your magic wand again, highlight your frame layer again, click on the inside of the frame. Go to SELECTIONS - INVERT, and grab your eraser tool. Highlight your original tube layer. Erase the parts of the legs and arm that hang over the frame layer.
SELECTIONS - SELECT NONE.
(see tag for placement)
Some elements now:
Element 38 - C/P and re-size 50%. Move to top left corner of frame.
(see tag for placement)
Element 9 - C/P and re-size 50%. Mirror and move to right corner of frame.
(see tag for placement)
Element 43 - C/P and re-size 50%. Mirror and move to top right corner of frame over element 9.
(see tag for placement)
Element 18 - C/P and re-size 80%. Move to bottom left corner of frame.
(see tag for placement)
Element 44 - C/P re-size 50%. Move to bottom left corner of frame in front of element 18.
(see tag for placement)
Element 46 - C/P and re-size 70%. Move to bottom left, but to the right of element 44.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Friday, 13 September 2013
PTU Magician Babe
This tutorial was written by me
on September 13, 2013.
It was made out of my own
creation and any similarity is purely coincidental.
I used PSPx2 but any version
would work.
Artist: Aruthur Crowe
You can find this tube at Arthur Crowe's Factory HERE
Do not use this tube
unless you have a license.
Scrap Kit: Magic Babe by Sweet Tooth Studio
This kit can be found at Arthur Crowe's Factory HERE
Mask: WSL 84 HERE
Filter: Eye Candy 5 Impact - Backlight
Font: Floydian Font HERE
Here goes:
The Mask Layer:
Open Paper 8.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and Paste Paper 8 into Selection.
The Mask Layer:
Open Paper 8.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and Paste Paper 8 into Selection.
Go to LAYERS – NEW MASK LAYER –
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL84 from the drop down menu – OK. Don't forget to MERGE GROUP. Duplicate and merge down. Re-size 110%.
Grab the largest CU of tube. C/P and move over mask layer.
Go to LAYERS – NEW MASK LAYER –
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL84 from the drop down menu – OK. Don't forget to MERGE GROUP
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL84 from the drop down menu – OK. Don't forget to MERGE GROUP. Duplicate and merge down. Re-size 110%.
Grab the largest CU of tube. C/P and move over mask layer.
Go to LAYERS – NEW MASK LAYER –
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL84 from the drop down menu – OK. Don't forget to MERGE GROUP
The elements:
Element 22 – C/P and re-size 60%. Move to top left corner of tag. I used Eye Candy 5 Impact - Back light on this element. I used the following settings.
(see tag for placement)
(see tag for placement)
Element 1 - C/P and move to bottom left side of tag.
(see tag for placement)
(see tag for placement)
Element 20 – C/P and re-size 70%. Move to bottom right side of tag.
(see tag for placement)
Element 12 – C/P and move to bottom right side in front of element 20.
(see tag for placement)
Element 3 - C/P and re-size 60%. Move to bottom left side of tag.
(see tag for placement)
Element 3 - C/P and re-size 60%. Move to bottom left side of tag.
(see tag for placement)
Element 29 – C/P and re-size 40%. Move to bottom left side in front of element 3.
(see tag for placement)
(see tag for placement)
Element 34 – C/P and re-size 30%. Move to bottom right corner of tag.
(see tag for placement)
Element 13 – C/P and re-size 30%. Mirror and move to the right side over element 34.
(see tag for placement)
Element 15 – C/P and re-size 20%. Move to left side and place on arm of scarecrow.
Element 13 – C/P and re-size 30%. Mirror and move to the right side over element 34.
(see tag for placement)
Element 15 – C/P and re-size 20%. Move to left side and place on arm of scarecrow.
(see tag for placement)
Element 26 – C/P and move leave in middle of tag.
(see tag for placement)
Now the tube layer:
If you are using the same tube as me, grab tube.
C/P and re-size 80%. Mirror and move to bottom and a little left on tag.
(see tag for placement)
If you are using the same tube as me, grab tube.
C/P and re-size 80%. Mirror and move to bottom and a little left on tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)