Showing posts with label Zindy S.D. Neilsen. Show all posts
Showing posts with label Zindy S.D. Neilsen. Show all posts
Tuesday, 3 December 2013
Friday, 16 August 2013
PTU Devil Bride
This tutorial was written by me
on August 16, 2013.
It was made out of my own
creation and any similarity is purely coincidental.
I used PSPx2 but any version
would work.
Artist: Zindy Nielsen
You can find this tube at Zindy Zone Shop HERE
Do not use this tube
unless you have a license.
Scrap Kit: Devils Bride by Amy Marie's Kits
This exclusive kit can be found at Amy Marie's Kits HERE
Mask: Vix Big Mask 018 HERE
Font: Marguerite Font HERE
Here goes:
The Mask Layer:
Open PP17.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and Paste PP17 into Selection.
The Mask Layer:
Open PP17.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and Paste PP17 into Selection.
Go to LAYERS – NEW MASK LAYER –
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE Vix_BigMask018 from the drop down menu – OK. Duplicate and merge down.
FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE Vix_BigMask018 from the drop down menu – OK. Duplicate and merge down.
The elements:
Element 109 – C/P and re-size 50%. Move to top left corner.
(see tag for placement)
Element 126 – C/P and move to top middle of tag.
(see tag for placement)
Element 131 – C/P and move to top right corner.
(see tag for placement)
Element 137 – C/P and move to bottom right side of tag.
(see tag for placement)
Element 75 – C/P and move to right side of tag. Duplicate and mirror.
Element 75 – C/P and move to right side of tag. Duplicate and mirror.
(see tag for placement)
I felt like this tag needed just a little bit more color but I didn't want to go overboard. So what I did was recolor some of the kit items. I chose Element 75 and used Hue/Saturation/Lightness with the setting below.
Element 132 – C/P and move to bottom left corner in front of trees. Duplicate and mirror, move down just a little. I used the same H/S/L and same settings as above.
(see tag for placement)
Element 135 – C/P and move to bottom left side of tag.
I felt like this tag needed just a little bit more color but I didn't want to go overboard. So what I did was recolor some of the kit items. I chose Element 75 and used Hue/Saturation/Lightness with the setting below.
Element 132 – C/P and move to bottom left corner in front of trees. Duplicate and mirror, move down just a little. I used the same H/S/L and same settings as above.
(see tag for placement)
Element 135 – C/P and move to bottom left side of tag.
(see tag for placement)
Element 143 – C/P and re-size 40%. Move to top part of element 135.
(see tag for placement)
Element 83 – C/P and re-size 50%. Move to lower right side. Duplicate and mirror.
(see tag for placement)
Element 98 – C/P and re-size 60%. Move to bottom middle of tag.
(see tag for placement)
Element 43– C/P and re-size 40%. Move in front of element 98.
(see tag for placement)
Element 140 – C/P and re-size 60%. Move to bottom right side of tag. Duplicate and mirror.
(see tag for placement)
(see tag for placement)
Element 140 – C/P and re-size 60%. Move to bottom right side of tag. Duplicate and mirror.
(see tag for placement)
Now the tube layer:
If you are using the same tube as me, grab tube.
I moved her to the bottom left corner of the tag.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Wednesday, 24 July 2013
*Right Click - Open Link In New Tab - On All
Images To View Full Size*
PTU Imperfect Little Angel
This tutorial was written by me
on July 24, 2013.
It was made out of my own
creation and any similarity is purely coincidental.
I used PSPx2 but any version
would work.
Artist: Zindy S.D. Neilsen
You can find his tubes
at Zindy Zone Shop HERE
Do not use this tube
unless you have a license.
Scrap Kit: Little Angel by Devilish Dezines
This kit is Exclusive to Digital Chaos HERE
Mask: WSL 84 HERE
Font: Sweetdream Font HERE
Here goes:
Let’s start
with the mask layer:
New
Raster – 800 X 800.
Open Paper 6. Open mask and minimize.
SELECTIONS
– SELECT ALL – Copy and paste Paper 6 into selection.
Go to LAYERS –
NEW
MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from drop down menu, find WSL 84 – OK.
Let’s do the frame layer now:
Frame 4 – C/P and re-size 60%.
Grab your magic wand. Click
in the middle of frames.
SELECTIONS – MODIFY – EXPAND 10 PIXELS.
New Raster Layer. Move under frame layer. Open Paper 5.
Copy and paste into
selection.
(see tag for placements)
Now for some elements:
Element 34 – C/P and re-size 80%. Move to up but behind the frame.
(see tag for placement)
Element 25 – C/P and re-size 50%. Move to right side of frame, but still behind. Duplicate and mirror.
(see tag for placement)
Element 44 – C/P and re-size 60%. Move to left side in front of frame. Duplicate and mirror.
(see tag for placement)
Element 38 – C/P and re-size 90%. Move to bottom right side of frame.
(see tag for placement)
Element 26 – C/P and re-size 30%. Move to bottom in front of element 38.
(see tag for placement)
Element 58 – C/P and re-size 50%. Move to left side in front of frame. Duplicate and mirror.
(see tag for placement)
Element 57 – C/P and re-size 40%. Move to left side of frame. Duplicate and mirror.
(see tag for placement)
Element 52 – C/P and re-size 30%. Move to bottom left of tag.
(see tag for placement)
Element 13 – C/P and re-size 40%. Move to bottom right side of tag.
(see tag for placement)
Now the tube layer:
If you are using the same tube as
me,
C/P tube as top most layer. Duplicate and move copy under frame layer. Highlight frame layer. Grab magic wand and click inside frame. Highlight copy of tube layer. Go to SELECTIONS - MODIFY - EXPAND 10 PIXELS - INVERT - DELETE - SELECTIONS - SELECT NONE. Highlight frame layer again. Grab magic wand again and click inside frame. Now highlight original tube layer. SELECTIONS - INVERT. Now grab the ERASER tool and erase parts of original tube layer you do not want showing. I also SELECTED element 58. Then I went to SELECTIONS - SELECT ALL - FLOAT - DE FLOAT - INVERT and erased more of the original tube layer. Did the same for copy of element 58 and element 57 as well as the copy of element 57. Same for element 26.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Wednesday, 29 May 2013
*Right Click - Open Link In New Tab - On All Images To View Full Size*
PTU Tears Of Yesterday
This tutorial was written by me on May 29, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Zindy Nielsen
and you can find her tubes @ ZINDY
Scrap Kit: Moment In Time by Devilish Dezines
You can find this kit HERE
Mask: Moonbeams & Spiderwebs HERE
Font: Escrita HERE
OK, let's get started.
Start a new image 700 X 700 - Transparent.
Highlight first layer.
Open Paper 6
SELECTIONS - SELECT ALL - NEW RASTER LAYER - C/PASTE INTO SELECTION Paper6 - SELECTION NONE
LAYERS - NEW MASK LAYER - FROM IMAGE - SOURCE LUMINANCE CHECKED - MB&SW Mask 23 - OK - MERGE GROUP
Duplicate and merge down.
Use selection tool using the following settings.
Start in the middle of mask and move out till you have a selection that looks something like this:
C/P the tube. SELECTIONS - INVERT - DELETE - INVERT - DUPLICATE -
ADJUST - BLUR - GAUSSIAN BLUR - RADIUS 25 - OK - SELECTIONS - SELECT
NONE.
Change blend mode of copy to Hard Light and change the blend mode of original tube layer to Overlay and reduce opacity to 60 for both layers.
Now for the elements.
Highlight Copy of Tube layer.
Element 11 - C/P and resize 70%. Move to left of tag. Duplicate and mirror.
(see tag for placement)
Element 48
- C/P and resize 80%. Move down a bit.
(see tag for placement)
Element 41 - C/P and resize 70%. Move down a bit.
(see tag for placement)
Open tube. C/P and move to the left.
(see tag for placement)
Element 15 - C/P and resize 70%. Move down.
(see tag for placement)
Element 43 - C/P resize 40%, move down and to the left of tag. Duplicate and mirror.
(see tag for placement)
Element 1 - C/P and resize 40%. Move down and right of tag. Duplicate and mirror.
(see tag for placement)
Element 27 - C/P and resize 25% and move down and right of tag.
(see tag for placement)
Element 34 - C/P and resize 60%. Move down a bit and left. Duplicate and mirror.
(see tag for placement)
Element 49 - C/P and resize 20%. Move to bottom left side of tag.
Element 40 - C/P and resize 10%. Move over Element48.
(see tag for placement).
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .PNG and resize if you wish.
I resize before I save and add name and © info.
Subscribe to:
Posts
(Atom)