Wednesday 27 November 2013
PTU Snow Girl
This tutorial was written by me on November 27, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Arthur Crowe
You can find this tube at Arthur Crowe's Factory HERE
Please Don't use this tube without a license.
Scrap Kit: Snow Girl Kit by Kizzed By Kelz
You can get this kit at Arthur Crowe's Factory HERE
Mask: WSL 116 HERE
Font: Font HERE Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 15. Open mask (WSL 116) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 15 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down. Re-size 105%.
Now for some elements:SELECTIONS – SELECT ALL – Copy and paste Paper 15 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down. Re-size 105%.
Snow Drift 2 – C/P and move to middle left side of tag. Duplicate and mirror.
(see tag for placement)
Tree – C/P and move this layer in between the two snow drift layers. Then move tree over to the left side of tag.
(see tag for placement)
Snowy Tree – C/P and re-size 50%. Also move this layer between the two snow drift layers. Move it to the left side of other tree.
(see tag for placement)
Bunny - C/P and re-size 30%. Move to upper left side of tag over snow drifts.
(see tag for placement)
Snowy Cluster - C/P and move to upper right side of tag. Duplicate and mirror.
(see tag for placement)
Snowy Wheel – C/P and re-size 75%. Move a little down but still in middle of tag.
(see tag for placement)
Bench – C/P and move a little down and to the right side of tag.
(see tag for placement)
(see tag for placement)
Tree – C/P and move this layer in between the two snow drift layers. Then move tree over to the left side of tag.
(see tag for placement)
Snowy Tree – C/P and re-size 50%. Also move this layer between the two snow drift layers. Move it to the left side of other tree.
(see tag for placement)
Bunny - C/P and re-size 30%. Move to upper left side of tag over snow drifts.
(see tag for placement)
Snowy Cluster - C/P and move to upper right side of tag. Duplicate and mirror.
(see tag for placement)
Snowy Wheel – C/P and re-size 75%. Move a little down but still in middle of tag.
(see tag for placement)
Bench – C/P and move a little down and to the right side of tag.
(see tag for placement)
Log – C/P and move down and a bit left on tag.
(see tag for placement)
Snow Balls - C/P and move to bottom left side of tag
(see tag for placement)
Snow Man - C/P and re-size 50%. Mirror and move to lower left side of tag.
(see tag for placement)
(see tag for placement)
Snow Balls - C/P and move to bottom left side of tag
(see tag for placement)
Snow Man - C/P and re-size 50%. Mirror and move to lower left side of tag.
(see tag for placement)
Bucket Of Snowballs - C/P and re-size 40%. Move to bottom and a bit right on the tag.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your favorite version of it now. C/P and re-size 70%. Move this to the right side of tag seating her on the bench.
(see tag for placement)
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your favorite version of it now. C/P and re-size 70%. Move this to the right side of tag seating her on the bench.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Tuesday 26 November 2013
This tutorial was written by me on November 26, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Alex Prihodko
You can find this tube at Pics For Design HERE
Please Don't use this tube without a license.
Scrap Kit: Northern Exposure by HorsePlay Pasture HERE
Mask: WSL 116 HERE
Font: Shipped Goods 1 Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open P5. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste P5 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
Gonna do a few elements right now:
Element 9 - C/P and move to bottom left corner of tag under frame layer. Duplicate and mirror.
(see tag for placement)
Element 8 - C/P and move to bottom right corner of tag under frame layer. Duplicate and mirror.
(see tag for placement)
Let’s do the frame layer now:
Element 11 – C/P leave in the middle of tag.
New Raster – 800 X 800.
Open P5. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste P5 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 116 – OK. Duplicate and merge down.
Gonna do a few elements right now:
Element 9 - C/P and move to bottom left corner of tag under frame layer. Duplicate and mirror.
(see tag for placement)
Element 8 - C/P and move to bottom right corner of tag under frame layer. Duplicate and mirror.
(see tag for placement)
Let’s do the frame layer now:
Element 11 – C/P leave in the middle of tag.
Grab your magic wand. Click
in the middle of element.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open P9. Copy and paste into selection. Keep selected.
If you are using the same tube as me, grab the version you want.
C/P and move it into position.
Go to SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to MULTIPLY.
(see tag for placements)
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open P9. Copy and paste into selection. Keep selected.
If you are using the same tube as me, grab the version you want.
C/P and move it into position.
Go to SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT and go to original tube layer and change BLEND MODE to MULTIPLY.
(see tag for placements)
Now for some more elements after frame layers:
Element 43 – C/P and move to the right side of frame. Duplicate and mirror.
Element 43 – C/P and move to the right side of frame. Duplicate and mirror.
(see tag for placement)
Element 4 – C/P and move to bottom part of frame.
Element 4 – C/P and move to bottom part of frame.
(see tag for placement)
Element 77 – C/P and re-size 60%. Move to top right corner of frame.
(see tag for placement)
Element 51 - C/P and move to bottom left corner of frame.
(see tag for placement)
Element 35 - C/P and move to bottom right corner of tag.
Use the following drop shadow:
Element 51 - C/P and move to bottom left corner of frame.
(see tag for placement)
Element 35 - C/P and move to bottom right corner of tag.
Use the following drop shadow:
V & H 1
Opacity 100
Blur 1
Color Black
(see tag for placement)
Opacity 100
Blur 1
Color Black
(see tag for placement)
Add drop shadow to all other layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name
and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
This tutorial was written by me on November 26, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Roman Zaric
You can find this tube at Roman Zaric Tubes Store HERE
Please Don't use this tube without a license.
Scrap Kit: Tamy by Sandy's Designs HERE
Mask: WSL 116 HERE
Font: Lobster 1.4 Font HERE
Here goes:
Open P2 and WSL 116, then minimize.
Highlight very bottom layer. SELECTIONS - SELECT ALL
Highlight very bottom layer. SELECTIONS - SELECT ALL
Copy and paste P2 into Selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE CHECKED –
CHOOSE WSL 116 from the drop down menu – OK. Re-size 105%.
Now for the frame:
Element 4 - C/P and re-size 75%. Free Rotate 90º right. Grab your magic wand. Click in the middle of the frame layer.
Go to SELECTIONS - MODIFY - EXPAND 8 PIXELS - INVERT.
C/Paste into selection P6. Keep selected.
Now grab the tube you are using. If you are using the same one as me, C/P and re-size 40%. Move her into position.
Duplicate the tube layer. Move the copy layer under frame layer. Delete extra hanging under frame layer. Highlight original tube layer. Grab your eraser tool. Erase the parts of her legs that is hanging OVER the frame.
(see tag for placement)
Lets do some more elements now:
Element 16 - C/P move under frame layer. Move to top left corner of tag. Duplicate and mirror.
(see tag for placement)
Element 24 - C/P move under frame layer. Move to top of tag. Duplicate and flip.
(see tag for placement)
Element 21 - C/P and move to and a bit to the left side of tag. Duplicate and mirror then flip.
(see tag for placement)
Element 11 - C/P and move this layer over the frame layer. Place it on the left top corner of frame. Duplicate and mirror.
(see tag for placement)
Element 1 - C/P and leave in the middle of tag but move it up just a little in the frame.
(see tag for placement)
Element 2 - C/P and re-size 80%. Move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Element 8 - C/P and re-size 80%. Move to bottom left side of frame. Duplicate and mirror.
(see tag for placement)
Element 9 - C/P and re-size 80%. Move to bottom middle of frame over tube.
(see tag for placement)
Element 14 - C/P and re-size 50%. Move to bottom middle of tag over element 9 layer.
(see tag for placement)
Element 34 - C/P and re-size 40%. Move to bottom right side of element 14.
(see tag for placement)
Element 31 - C/P and re-size 30%. Move to bottom right side of tag, but to the left of element 34.
(see tag for placement)
Element 33 - C/P and re-size 35%. Move to bottom left side of element 14.
(see tag for placement)
Element 32 - C/P and re-size 30%. Move to bottom right side of element 31.
(see tag for placement)
Element 12 - C/P and re-size 40%. Move to bottom left side of element 14.
(see tag for placement)
Element 13 - C/P and re-size 30%. Move to bottom left side of element 12.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Sunday 24 November 2013
**Weekend Only RAC Special**
You get special holiday layers of 2013 X PARTY GIRL!! Just spend any $$ in the store and add her to your cart. Pretty easy eh?
You can get this kit at HERE
Friday 22 November 2013
PTU Holiday Vixen
This tutorial was written by me on November 22, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Ismael Rac
You can find this tube at XeracX Store HERE
Please Don't use this tube without a license.
Scrap Kit: It's A Wonderland by Horseplay Pasture
You can get this kit at the Scraps From The Heart Store HERE
Mask: WSL 84 HERE
Font: Noel Font HERE Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 11. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 11 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Now for some elements:SELECTIONS – SELECT ALL – Copy and paste Paper 11 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Element 13 – C/P and move to bottom right side of tag.
(see tag for placement)
Element 4 – C/P and re-size 40%. Move to middle of fireplace.
(see tag for placement)
Element 12 – C/P and re-size 40%. Move to the middle of fireplace under element 4.
(see tag for placement)
Element 17 - C/P and re-size 40%. Move to left side of fireplace.
(see tag for placement)
Element 16 - C/P and re-size 40%. Move to right side of fireplace.
(see tag for placement)
Element 7 – C/P and re-size 40%. Move to top left corner of fireplace. Duplicate and mirror. Move to for right corner of fireplace.
(see tag for placement)
Element 31 – Add new raster layer. Grab your selection tool. Make a rectangle at the top of the tag. C/Paste into selection - the element and re-size 40%.
(see tag for placement)
(see tag for placement)
Element 4 – C/P and re-size 40%. Move to middle of fireplace.
(see tag for placement)
Element 12 – C/P and re-size 40%. Move to the middle of fireplace under element 4.
(see tag for placement)
Element 17 - C/P and re-size 40%. Move to left side of fireplace.
(see tag for placement)
Element 16 - C/P and re-size 40%. Move to right side of fireplace.
(see tag for placement)
Element 7 – C/P and re-size 40%. Move to top left corner of fireplace. Duplicate and mirror. Move to for right corner of fireplace.
(see tag for placement)
Element 31 – Add new raster layer. Grab your selection tool. Make a rectangle at the top of the tag. C/Paste into selection - the element and re-size 40%.
(see tag for placement)
Element 43 – C/P and move to left side of tag.
(see tag for placement)
Element 38 - C/P and re-size 40%. Move bottom right side of element 43.
(see tag for placement)
Element 37 - C/P and re-size 40%. Move to bottom left side of element 43.
(see tag for placement)
(see tag for placement)
Element 38 - C/P and re-size 40%. Move bottom right side of element 43.
(see tag for placement)
Element 37 - C/P and re-size 40%. Move to bottom left side of element 43.
(see tag for placement)
Element 33 - C/P and move to left side of tag in front of element 43.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your favorite version of it now. C/P and re-size 53%. Move this to the right corner of tag in front of fire.
(see tag for placement)
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab your favorite version of it now. C/P and re-size 53%. Move this to the right corner of tag in front of fire.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
This tutorial was written by me on November 22, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Ismael Rac
You can find this tube at the XeracX Store HERE
Please Don't use this tube without a license.
Scrap Kit: 2013 Holiday Vixen by Kandii Popz Dezignz
You can find this Exclusive kit HERE
Mask: WSL 84 HERE
Font: Happy New Year Font HERE
Here goes:
Let’s start
with the mask layer:
New Raster – 800 X 800.
Open Paper 9. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 9 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s do the frame layer now:
Frame 1 – C/P and re-size 80%. Move down and to the right.
Lets do some more elements now:
Holly - C/P and move this layer under Frame 1 layers and move to top right side of tag. Duplicate and mirror.
(see tag for placement)
Baubles - C/P and make sure layer is over Frame 1 layer. Move to right side of frame. Duplicate and mirror.
(see tag for placement)
Kitty - C/P and re-size 80%. Mirror and move to bottom right side of tag.
(see tag for placement)
Candles - C/P and re-size 70%. Move to bottom middle of frame.
(see tag for placement)
Tree - C/P and move to bottom left side of frame.
(see tag for placement)
Snow - C/P and leave where it lands.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, C/P the full size of tube and re-size 53%. Move to the bottom left side of tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
New Raster – 800 X 800.
Open Paper 9. Open mask and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 9 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Let’s do the frame layer now:
Frame 1 – C/P and re-size 80%. Move down and to the right.
Grab your magic wand. Click
in the middle of element.
SELECTIONS – MODIFY – EXPAND 8 PIXELS.
New Raster Layer. Move under frame layer. Open Paper 5.
Copy and paste into
selection. Keep selected.
If you are using the same tube as me, grab the version you want.
C/P and mirror and move it into position.
Go to SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT.
(see tag for placements)
If you are using the same tube as me, grab the version you want.
C/P and mirror and move it into position.
Go to SELECTIONS - INVERT - DELETE - SELECTIONS - INVERT. Duplicate the tube layer. ADJUST – BLUR – GAUSSIAN BLUR – RADIUS 25 - OK
Change BLEND MODE of copy of tube layer to HARD LIGHT.
(see tag for placements)
Lets do some more elements now:
Holly - C/P and move this layer under Frame 1 layers and move to top right side of tag. Duplicate and mirror.
(see tag for placement)
Baubles - C/P and make sure layer is over Frame 1 layer. Move to right side of frame. Duplicate and mirror.
(see tag for placement)
Kitty - C/P and re-size 80%. Mirror and move to bottom right side of tag.
(see tag for placement)
Candles - C/P and re-size 70%. Move to bottom middle of frame.
(see tag for placement)
Tree - C/P and move to bottom left side of frame.
(see tag for placement)
Snow - C/P and leave where it lands.
(see tag for placement)
Now for the tube(s):
If you are using the same tube as me, C/P the full size of tube and re-size 53%. Move to the bottom left side of tag.
(see tag for placement)
Add drop shadow to layers of your choosing.
I used:
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Wednesday 20 November 2013
PTU Christene
This tutorial was written by me on November 20, 2013.
It was made out of my own creation and any similarity is purely coincidental.
I used PSPx2 but any version will do.
Artist: Tony Tzanoukakis
You can find this tube at Tony Tz Store HERE
Please Don't use this tube without a license.
Scrap Kit: Christene by Kandii Popz Dezignz
You can get this kit at the Tony Tz Store HERE
Mask: WSL 84 HERE
Font: All Ages Font HERE Let’s start with the mask layer:
New Raster – 800 X 800.
Open Paper 8. Open mask (WSL 84) and minimize.
SELECTIONS – SELECT ALL – Copy and paste Paper 8 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Now for some elements:SELECTIONS – SELECT ALL – Copy and paste Paper 8 into selection.
Go to LAYERS – NEW MASK LAYER – FROM IMAGE – SOURCE LUMINANCE - CHECKED – from menu, find WSL 84 – OK. Duplicate and merge down. Re-size 115%.
Fire – C/P and re-size 70%. Move to bottom and right side of tag.
(see tag for placement)
Stockings – C/P and re-size 40%. Move to far right side of fireplace.
(see tag for placement)
Bells – C/P and re-size 40%. Move to the middle of fireplace.
(see tag for placement)
Wreath - C/P and re-size 40%. Move to top middle over fireplace.
(see tag for placement)
Champagne – C/P and re-size 30%. Move to top right side of fireplace.
(see tag for placement)
Glass – C/P and re-size 30%. Move to top left side of fireplace.
(see tag for placement)
Candles 2 – C/P and re-size 40%. Move to top left side of fireplace. Duplicate and mirror. Move to right corner fireplace.
(see tag for placement)
Stockings – C/P and re-size 40%. Move to far right side of fireplace.
(see tag for placement)
Bells – C/P and re-size 40%. Move to the middle of fireplace.
(see tag for placement)
Wreath - C/P and re-size 40%. Move to top middle over fireplace.
(see tag for placement)
Champagne – C/P and re-size 30%. Move to top right side of fireplace.
(see tag for placement)
Glass – C/P and re-size 30%. Move to top left side of fireplace.
(see tag for placement)
Candles 2 – C/P and re-size 40%. Move to top left side of fireplace. Duplicate and mirror. Move to right corner fireplace.
(see tag for placement)
Tree – C/P and move to bottom left corner of tag in front of fireplace.
(see tag for placement)
Word Art - C/P and re-size 40%. Move to middle of tree.
(see tag for placement)
Presents - C/P and re-size 70%. Move to bottom left corner in front of tree.
(see tag for placement)
Tree – C/P and move to bottom left corner of tag in front of fireplace.
(see tag for placement)
Word Art - C/P and re-size 40%. Move to middle of tree.
(see tag for placement)
Presents - C/P and re-size 70%. Move to bottom left corner in front of tree.
(see tag for placement)
Mistletoe - C/P and re-size 40%. Move to top right side of tag. Duplicate and mirror.
(see tag for placement)
Tinsel - C/P and move to top of tag.
(see tag for placement)
Jingle bells - C/P and re-size 40%. Move to top middle of tag over tinsel.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab it now. C/P and re-size 30%. Move this to the bottom right corner of tag in front of fire.
(see tag for placement)
(see tag for placement)
Tinsel - C/P and move to top of tag.
(see tag for placement)
Jingle bells - C/P and re-size 40%. Move to top middle of tag over tinsel.
(see tag for placement)
I'll place the tube layer now:
If you are using the same tube as me, grab it now. C/P and re-size 30%. Move this to the bottom right corner of tag in front of fire.
(see tag for placement)
Add drop shadow to layers of your
choosing.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I used
V & H 2
Opacity 70
Blur 7
Color Black
Now you can add name and © information. Save as .png and re-size if you wish.
I re-size before I save and add
name and © info.
Let me know what you think of
this tutorial.
Subscribe to:
Posts
(Atom)